PRS SE McCarty 594 Singlecut - Overview and Best Prices
- 1 Prices - New from $764.15 >
- From PRS's 2023 SE series
- Made in Indonesia
- 6 strings
- 24.6"'' scale
- 10" Fretboard Radius
- Flame Maple top
- Mahogany body
- Bound Mahogany neck
- Rosewood fretboard
- Bridge pickup: PRS 58/15 LT S (Humbucker/Passive)
- Neck pickup: PRS 58/15 LT S (Humbucker/Passive)
- 2 volume and 2 tone Speed knobs
- 3-way Switch
- PRS Two-Piece bridge
- Pattern Vintage Set neck
- 22 Medium Jumbo frets
- Vintage-Style tuners
- Weight around 8.4lbs (3.8kgs)
- Side-By-Side Comparison
Show Specs
PRS SE McCarty 594 Singlecut | ||
---|---|---|
General | ||
Brand: | PRS | |
Year: | 2023 | |
Configuration: | HH | |
Strings: | 6 | |
Made in: | Indonesia | |
Series: | SE | |
Colors: | Sunburst, Blue, Gold Burst | |
Left-Handed Version: | No | |
Body | ||
Top: | Flame Maple | |
Type: | Solid Body | |
Body Material: | Mahogany | |
Bridge: | PRS Two-Piece | |
Neck | ||
Neck Joint: | Set | |
Tuners: | Vintage-Style | |
Fretboard: | Rosewood | |
Neck Material: | Bound Mahogany | |
Decoration: | Birds | |
Scale Size: | 24.6" | |
Shape: | Pattern Vintage | |
Thickness: | 1st Fret: 0.87'' (22.1mm) - 12th Fret: 0.97'' (24.6mm) | |
Frets: | 22 Medium Jumbo | |
Fretboard Radius: | 10" | |
Nut: | PRS Propietary | |
Nut Width: | 42.9mm (1.688'') | |
Electronics | ||
Bridge Pickups: | PRS 58/15 LT S (Humbucker / Passive) | |
Neck Pickup: | PRS 58/15 LT S (Humbucker / Passive) | |
Switch: | 3 | |
Knobs: | Speed | |
Volume Controls: | 2 | |
Tone Controls: | 2 | |
Hardware | ||
Strap Lock: | No | |
Hardware Color: | Nickel |
Show Diagram
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
PRS SE McCarty 594 Singlecut
- Expensive Wood
- PRS Propietary Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Price Overview
Its average competitor's price is $850, which means that the PRS SE McCarty 594 Singlecut is around 10% cheaper than the competition. This takes into account all instruments of the same category in our database with 6 strings and Fixed bridge that are made in Indonesia.
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
User Reviews & Feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
VoteOften Compared With
Hand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the PRS SE McCarty 594 Singlecut's construction is balanced for most hand sizes.
Nevertheless, this comes down in the end to personal preference. Make sure you test this guitar—or another one with similar characteristics—before buying.
Beginner Friendliness
The PRS SE McCarty 594 Singlecut meets 4 out of our 8 criteria items for beginner friendliness, which means that it's not bad for beginners, but it could be better. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
PRS SE McCarty 594 Singlecut- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Short scale
- Comfortable fretboard
- Narrow nut
- Comfortable neck
- Locking tuners
Videos
How Lightweight is it?
We found that the PRS SE McCarty 594 Singlecut weighs around 8.4lbs (3.8kgs). This was recorded from some online retailers that publish the weight of the instruments they sell.
Playability
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the PRS SE McCarty 594 Singlecut's 24.6" scale length compared to other common sizes:
This is similar to some of the Les Paul guitars made in the 50s, and it's slightly shorter than modern Les Pauls (24.75''). Short scales like these make the tone sound more bassy. It also makes the frets closer to each other, and bending is easier due to the lower tension of the strings. However, it comes at the cost of not letting you set the action of the strings as low without hearing fret buzz because the low tension will make the strings looser.
Remember that you can still try a thicker string gauge to increase the tension to let you lower the action.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
The PRS SE McCarty 594 Singlecut's neck thickness is approximately 0.87'' (22.1mm) at the first fret, and 0.97'' (24.6mm) at the twelfth.
These measurements were taken either from the official PRS website, or, in case this information wasn't provided, by researching multiple online marketplaces and forums where owners of this model have posted their measurements.
It has a Asymmetrical type neck. The shape is Asymmetrical. Even though it looks like a poorly-made job, it's, in fact, the shape that most naturally adapts to the arc that your hand makes when grabbing a guitar neck. You'll notice that the lower part of your palm makes a more pronounced, deeper curve while the upper part makes a more subtle arch. This is the shape that adapts the best to that natural shape of your hand.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The PRS SE McCarty 594 Singlecut has a 10" fingerboard radius.
Here's an image comparing this fretboard radius to other popular choices:
This is slightly flatter than the typical modern Stratocaster, but not by a lot. This radius will make it comfortable to play chords without muting strings accidentally. However, when compared to Strats, the extra .5 inches radius will make it slightly more comfortable to play solos without sacrificing too much chord playability.
Compound radius fingerboards give the best of both worlds. Unfortunately, the PRS SE McCarty 594 Singlecut has the same radius across the board.
Playability compared to main competitors
Nut Width
The PRS SE McCarty 594 Singlecut has a nut width of 42.9mm (1.688''). This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Frets
The PRS SE McCarty 594 Singlecut has 22 frets. Even though 24 frets has become really popular, there's still a good reason to get fewer frets; the pickup at the neck position will be further away from the bridge. This makes the neck pickup achieve a warmer tone. You might want this if you're playing Jazz or similar genres.
However, if you don't care about the warmer neck pickup, more frets will always be better. It's always nice to have the option to play higher notes if you want to.
It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The PRS SE McCarty 594 Singlecut's frets are Medium Jumbo size. These sit somewhere between a Jumbo and a Medium fret. They're not quite as tall as a full Jumbo, so you'll still feel the fretboard, but you won't feel it as much as with medium frets. This is a good size if you want to make it easy to press the strings but would also like a little bit of ''feedback'' to know when to stop pressing so the notes don't go out of pitch.
Playability Score
Tone
Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.
Wood
Mahogany Body and Neck: This is the type of wood found in many top-of-the-line guitars, so that's a positive point for the build quality. This red-looking wood Mahogany is found in Africa and Central America and has great sustain and a warm tone due to its high density. The downside about this type of wood is that it's relatively heavy.
Rosewood Fretboard: Since the ban of Brazillian Rosewood, this has become a rare and expensive wood. It's not usually used for guitar bodies because of this, and also because it's heavy. Instead, it's used mainly for fretboards. Sometimes it's also used for necks because it's an extremely hard wood (even harder than maple). Its tonality tends to favor warm tones.
Pickups
This guitar comes with pickups from one of the top brands: PRS. So you can expect well built pickups with great sound that shouldn't need an upgrade anytime soon.
These are passive pickups, so you can expect a rounder sound and a moderade level of output.
The PRS SE McCarty 594 Singlecut's configuration is HH. With this pickup combination, you'll get warmer tones and more output than using single coils. Humbucker pickups cancel the noise that single-coil suffer from, which also results in a warmer tone. This pickup combination isn't only for high-gain music like Hard Rock or Heavy Metal. Their warmness is also popular for Jazz, Indie, R&B, Blues and more.
More with the same pickups
Versatility
It comes with the popular 3-way switch that is present in most guitars. For more versatility, players tend to prefer a 5-way switch, although it all depends on what you want to use your guitar for.
Unfortunately, it doesn't come with more options for coil split or coil tapping. This makes it less versatile than some competitors.
What music genre is it good for?
As a 6 strings, Solid Body guitar with HH configuration and Passive pickups, we'd recommend it for genres like Hard Rock or similar. However, you can use almost any guitar for any genre. This is just the typical type of music for this particular one.
Sound Score
Build Quality
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The PRS SE McCarty 594 Singlecut is made in Indonesia. Many people prefer the quality of an Indonesian guitar over a Chinese. Respectable brands like Epiphone, Ibanez and Schecter are building in this country because of the great quality and lower price. Some people like to compare them to the ones built in Japan during the 80s, when Japanese guitar makers made a name for themselves.
Bridge
PRS Two-Piece: The advantage of fixed bridges is that they don't require any kind of set-up. This makes it extremely easy when changing strings because you don't need to adjust anything besides tuning the guitar. Also, the fact that the bridge is directly attached to the body will help to increase sustain. The disadvantage is the lack of versatility since you can't create the same vibrato effects as with tremolo bridges.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your guitar. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the PRS SE McCarty 594 Singlecut has a PRS Propietary nut. PRS uses a synthetic material that is self-lubricating and fairly strong. This is good for playability and tuning stability. The tone is not as bright as with TUSQ nuts, and it's also not as resistant, but it's still a good quality nut.
Neck Joint
The neck joint is the part where the neck of the guitar meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.
This guitar has a Set neck joint. This type of neck joint consists of using different pieces of wood for the neck and the body of the guitar. Both pieces are then glued together. This is more expensive to make than a bolt-on neck, but it's cheaper than a neck-through guitar. Some people believe that this gives more sustain than a bolt-on neck due to both pieces having a 'better connection' than with bolts. Still, it's something difficult to prove.
However, this type of neck joint does have the disadvantage of not allowing you to easily swap the neck for another. This makes this type of neck joint less mod-friendly.