Fender Dave Murray Stratocaster - Overview and Best Prices
- 5 Prices - New from $1,349.99 >
- From Fender's 2015 Artist series
- Dave Murray Signature
- Made in Mexico
- 6 strings
- 25.5"'' scale
- 9.5" to 14" Fretboard Radius
- Alder body
- Maple neck
- Rosewood fretboard
- Bridge pickup: Seymour Duncan Hot Rails Strat SHR-1B (Humbucker/Passive)
- Middle pickup: Seymour Duncan JB Jr. SJBJ-1N (Humbucker/Passive)
- Neck pickup: Seymour Duncan Hot Rails Strat SHR-1N (Humbucker/Passive)
- 1 volume and 2 tone Bell knobs
- 5-way Switch
- Floyd Rose FRT-O1000 Double Locking 2-Point Tremolo bridge
- Dave Murray C Bolt-On neck
- 21 Medium Jumbo frets
- Vintage-Style tuners
- Weight between 8lbs (3.6kgs) and 8.3lbs (3.8kgs)
- Side-By-Side Comparison
Show Specs
| Fender Dave Murray Stratocaster | ||
|---|---|---|
| General | ||
| Brand: | Fender | |
| Year: | 2015 | |
| Configuration: | HHH | |
| Strings: | 6 | |
| Made in: | Mexico | |
| Series: | Artist | |
| Colors: | Sunburst | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Alder | |
| Bridge: | Floyd Rose FRT-O1000 Double Locking 2-Point Tremolo | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Vintage-Style | |
| Fretboard: | Rosewood | |
| Neck Material: | Maple | |
| Decoration: | White Dot | |
| Scale Size: | 25.5" | |
| Shape: | Dave Murray C | |
| Thickness: | 1st Fret: 0.82'' (20.8mm) - 12th Fret: 0.86'' (21.8mm) | |
| Frets: | 21 Medium Jumbo | |
| Fretboard Radius: | 9.5" to 14" | |
| Nut: | Locking | |
| Nut Width: | 42.9mm (1.688'') | |
| Electronics | ||
| Bridge Pickups: | Seymour Duncan Hot Rails Strat SHR-1B (Humbucker / Passive) | |
| Middle Pickup: | Seymour Duncan JB Jr. SJBJ-1N (Humbucker / Passive) | |
| Neck Pickup: | Seymour Duncan Hot Rails Strat SHR-1N (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Bell | |
| Volume Controls: | 1 | |
| Tone Controls: | 2 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Show Diagram
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
Fender Dave Murray Stratocaster
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Tremolo
- Compound Radius Fretboard
- Retainer Bar
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No 21:1 Tuner Ratio
- No Strap Lock
Price Overview
Its average competitor's price is $1100, which means that the Fender Dave Murray Stratocaster costs around 23% more than the competition. It might be due to it having additional features, but know that you can find cheaper similar alternatives. This takes into account all instruments of the same category in our database with 6 strings and Double Locking bridge that are made in Mexico.
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
User Reviews & Feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
VoteOften Compared With
Hand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Fender Dave Murray Stratocaster's construction favors people with relatively small hands.
Nevertheless, this comes down in the end to personal preference. Make sure you test this guitar—or another one with similar characteristics—before buying.
Beginner Friendliness
The Fender Dave Murray Stratocaster meets 4 out of our 8 criteria items for beginner friendliness, which means that it's not bad for beginners, but it could be better. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
Fender Dave Murray Stratocaster- Comfortable shape
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Narrow nut
- Short scale
- Locking tuners
- Easy-to-use bridge
Videos
How Lightweight is it?
We found that the Fender Dave Murray Stratocaster weighs between 8lbs (3.6kgs) and 8.3lbs (3.8kgs). This was recorded from some online retailers that publish the weight of the instruments they sell.
Playability
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the Fender Dave Murray Stratocaster's 25.5" scale length compared to other common sizes:
This is the same scale length used in Stratocaster guitars, and it's one of the main reasons they have such a bright sound. It's considered a long scale when compared to most non-baritone guitars.
Since the distance between bridge and nut is relatively long, you'll need to give the strings more tension to get them in tune. This higher tension will allow for a couple of things. First, you can get a lower action (get the strings closer to the fretboard) because the strings won't 'wiggle' too much when pluck and won't cause fret buzz. This can allow you to use lower tunings without increasing your string gauge, and it will make it easier to press down the strings fast.
However, the frets will also have a wider separation between each other, which can make it harder to play, especially if you got small hands. The higher tension will also make the strings feel stiffer, so bending will require more strength.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
The Fender Dave Murray Stratocaster's neck thickness is approximately 0.82'' (20.8mm) at the first fret, and 0.86'' (21.8mm) at the twelfth.
These measurements were taken either from the official Fender website, or, in case this information wasn't provided, by researching multiple online marketplaces and forums where owners of this model have posted their measurements.
It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.
Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The Fender Dave Murray Stratocaster has a compound fingerboard radius of 9.5" to 14".
A compound radius is the best you can get because you'll get the best of both worlds. It starts curved at the nut, but it flattens as you get closer to the body. This means that you'll get great comfortability for chords on the first few frets, but also a flatter fretboard for playing solos without problems on the higher frets.
Playability compared to main competitors
Nut Width
The Fender Dave Murray Stratocaster has a nut width of 42.9mm (1.688''). This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Frets
The Fender Dave Murray Stratocaster has 21 frets. Even though 24 frets has become really popular, there's still a good reason to get fewer frets; the pickup at the neck position will be further away from the bridge. This makes the neck pickup achieve a warmer tone. You might want this if you're playing Jazz or similar genres.
However, if you don't care about the warmer neck pickup, more frets will always be better. It's always nice to have the option to play higher notes if you want to.
It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The Fender Dave Murray Stratocaster's frets are Medium Jumbo size. These sit somewhere between a Jumbo and a Medium fret. They're not quite as tall as a full Jumbo, so you'll still feel the fretboard, but you won't feel it as much as with medium frets. This is a good size if you want to make it easy to press the strings but would also like a little bit of ''feedback'' to know when to stop pressing so the notes don't go out of pitch.
Playability Score
Tone
Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.
Wood
Alder Body: This is a lightweight type of wood that was popularized by Fender. According to them, it's a wood that offers a balanced tone but that favors the upper midrange slightly.
Maple Neck: This is one of the most popular types of wood used in all kinds of guitars. It's heavy, strong and compact, which makes it great for necks. However, it's also used for fretboards, bodies and tops due to its light color, resistance and beautiful patterns. When it comes to tone, it highlights the mid and high frequencies.
Rosewood Fretboard: Since the ban of Brazillian Rosewood, this has become a rare and expensive wood. It's not usually used for guitar bodies because of this, and also because it's heavy. Instead, it's used mainly for fretboards. Sometimes it's also used for necks because it's an extremely hard wood (even harder than maple). Its tonality tends to favor warm tones.
Pickups
This guitar comes with pickups from one of the top brands: Seymour Duncan. So you can expect well built pickups with great sound that shouldn't need an upgrade anytime soon.
These are passive pickups, so you can expect a rounder sound and a moderade level of output.
The Fender Dave Murray Stratocaster's configuration is HHH. If you like warm tones, three Humbuckers will give you all the warmness you want, but also tons of output power. The advantage of having three humbucking pickups instead of a combination of single-coils and humbuckers is that you won't hear volume differences when switching to other pickups. And since they're all humbucker pickups, you don't need to adjust the middle pickup so high that it will get in the way of your pick.
More with the same pickups
Versatility
It gives you a good amount of tone options with its 5-way switch. You can use it to choose at least 5 different pickup combinations.
Unfortunately, it doesn't come with more options for coil split or coil tapping. This makes it less versatile than some competitors.
What music genre is it good for?
As a 6 strings, Solid Body guitar with HHH configuration and Passive pickups, we'd recommend it for genres like Hard Rock or similar. However, you can use almost any guitar for any genre. This is just the typical type of music for this particular one.
Sound Score
Build Quality
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The Fender Dave Murray Stratocaster is made in Mexico. This is the country that some American brands choose for building really good, but cheaper guitars. You can expect a guitar that offers a good price-quality relationship, although they don't get the same quality control as the ones built in Japan or the United States.
Bridge
Floyd Rose FRT-O1000 Double Locking 2-Point Tremolo: With this type of tremolo bridge, you'll be able to perform dive bombs and pinch harmonics without getting out of tune. This type of bridge gives you the best versatility, but it also makes it harder to set up your guitar correctly, especially when changing your strings.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your guitar. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the Fender Dave Murray Stratocaster has a Locking nut. Instead of the typical nut, this nut locks the strings in place and will make them stay in tune even after heavy tremolo use. This type of nut provides the best tune stability, but they also make the guitar more expensive.
It also comes with a retainer bar for the locking nut, which is a helpful addition. Without it, the strings would change pitch once you lock down the nut, so you'd have to make more micro-adjustments at the bridge to tune it correctly.
Neck Joint
The neck joint is the part where the neck of the guitar meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.
This guitar has a Bolt-On neck joint. Even though this type of neck was looked down upon for a long time, nowadays bolt-on necks are well built and provide just as much sustain as any other join method. First of all, it's cheap to make because it consists of simply 4 bolts that attach the neck to the body. And you can travel with the guitar more easily, swap out the neck if you damage it, or upgrade to a more comfortable neck later on.
