Washburn D10SCE-12 String Review & Prices
- From Washburn's 2017 Heritage series
- Made in China
- 12 strings
- 25.3"'' scale
- 12" Fretboard Radius
- Solid Sitka Spruce top
- Mahogany back
- Mahogany sides
- Satin Mahogany with 2 way Truss Rod neck
- Ovangkol fretboard
- Bridge pickup: Fishman Presys II 301T w/tuner (Preamp/Active)
- Ovangkol bridge
- Acoustic Washburn Heritage Set neck
- 20 Medium frets
- Chrome Diecast tuners
- Compare Specs >
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
Washburn D10SCE-12 String
- Expensive Wood
- NuBone Nut
- Top Brand Pickups
- Electronics
- NuBone Saddle
- Solid Top Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- Laminated Side Wood
- Laminated Back Wood
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Price Overview
Its average competitor's price is $590, which means that the Washburn D10SCE-12 String is around 39% cheaper than the competition. This takes into account all instruments of the same category in our database with 12 strings and Fixed bridge that are made in China.
Videos
Your feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
VoteIs it Easy to Play?
The Washburn D10SCE-12 String meets 4 out of our 8 criteria items for beginner friendliness, which means that it's not bad for beginners, but it could be better. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
Washburn D10SCE-12 String- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Short scale
- Soft Strings
- Locking tuners
Hand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Washburn D10SCE-12 String's construction favors people with relatively small hands.
Nevertheless, this comes down in the end to personal preference. Make sure you test this guitar—or another one with similar characteristics—before buying.
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the Washburn D10SCE-12 String's 25.3" scale length compared to other common sizes:
This is considered a long scale, but slightly shorter than what's commonly found in acoustic guitars.
Since the distance between bridge and nut is relatively long, strings will feel stiff and more difficult to bend, but the tone will feel brighter. It will also be less likely to produce fret buzzing and rattling when strumming hard.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.
Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The Washburn D10SCE-12 String has a 12" fingerboard radius.
Here's an image comparing this fretboard radius to other popular choices:
This is the same radius that Gibson uses in most of their guitars. When compare to the other popular radius of Fender Stratocasters, you can see that it's a lot flatter. Guitars with this radius are usually made to bring a good balance between single-note and chord playing.
Compound radius fingerboards give the best of both worlds. Unfortunately, the Washburn D10SCE-12 String has the same radius across the board.
Playability compared to main competitors
Nut Width
The Washburn D10SCE-12 String has a nut width of 47mm (1.85''). This is considered a narrow width for a 12-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.
If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.
Frets
It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The Washburn D10SCE-12 String's frets are Medium size. With medium frets, you can feel the fretboard more than with jumbo frets, but it's still easier to press the strings cleanly than with small frets; notes might change their pitch just slightly if you press hard on the fret. Also, if you need to do some fret leveling after years of playing, you'll have some room to sand them down without having to replace them.
Playability Score
Tone Analysis
The type of wood and even the shape of the body will have a lot of influence in the final tone of an acoustic guitar. Here's we'll talk about what kind of tone you can expect from its specs.
Wood
Spruce Top: This wood has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range.
Mahogany Back, Sides and Neck: This is the type of wood found in many top-of-the-line guitars, so that's a positive point for the build quality. This red-looking wood Mahogany is found in Africa and Central America and has great sustain and a warm tone due to its high density. The downside about this type of wood is that it's relatively heavy.
Ovangkol Fretboard: It's a beautiful wood that's popular for acoustic guitars. Its tone sits somewhere between rosewood and mahogany, meaning it has a punchy low-end and nice mid-range.
Pickups
This guitar comes with pickups from one of the top brands: Fishman. So you can expect well built pickups with great sound that shouldn't need an upgrade anytime soon.
Sound Score
Build Quality Analysis
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The Washburn D10SCE-12 String is made in China. So you can expect lower build quality when compared to others made in Korea, Japan or the United States. Guitars made in this country are meant for mass production, which translates into less attention to detail and quality control. This doesn't mean the product is made poorly at all. Chinese products have a bad reputation since long ago, but they've definitely improved a lot the last few years.
Bridge
Ovangkol: The advantage of fixed bridges is that they don't require any kind of set-up. This makes it extremely easy when changing strings because you don't need to adjust anything besides tuning the guitar. Also, the fact that the bridge is directly attached to the body will help to increase sustain. The disadvantage is the lack of versatility since you can't create the same vibrato effects as with tremolo bridges.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your guitar. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the Washburn D10SCE-12 String has a NuBone nut. It's a synthetic nut from the same creators of Ivory TUSQ. It's a hard and self-lubricating material that helps a lot with tuning stability. It produces a brighter tone similar to TUSQ, but it's not as hard.
Build Quality Score
All Specs
Washburn D10SCE-12 StringUser Reviews
Help others by sharing your opinion about this guitar. Note: to avoid spam, your review will be submitted for approval before appearing here.
