Cort Cut Craft Review & Prices

Search

Browse >>

Had

Have

Want

Add to Compare

Be the first to rate it

FIND IT ON:

Set a price alert

• From Cort's 2019 Limited series
• Made in Indonesia
• 6 strings
• 25.5" to 25"'' scale
• 15.748" Fretboard Radius
• Solid European Spruce(Master Grade) top
• Solid Myrtlewood back
• Solid Myrtlewood sides
• Walnut Reinforced Mahogany neck
• Ebony fretboard
• Bridge pickup: L.R.Baggs M80 (Preamp/Active)
• Ebony bridge
• Acoustic Cort Neck Set neck
• 20 Medium frets
• Die-Casting Gold tuners
• Compare Specs >

Videos

The Sessions: Cort Cut Craft

CORT Cut Craft LIMITED EDITION (8K video)

Hear the Cort Cut Craft

콜트 Cut Craft Limited NAT / 원미사운드

UNBOXING Cort Cut Craft LIMITED EDITION

Cort Cut Craft Limited Demo & Review!

NAMM 2020 | Cort Cut Craft entre outros | Parte 2

CORT CUT CRAFT Akustikgitarre

MusicBart - no leaves / fingerstyle Akustikgitarre / acoustic guitar / Cort cut craft

MusicBart - number 3 / Solo Fingerstyle guitar / Cort cut craft

More Videos

Your feedback

Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!

Explore All From Cort >

Is it Easy to Play?

The Cort Cut Craft meets 4 out of our 8 criteria items for beginner friendliness, which means that it's not bad for beginners, but it could be better. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.

Hand Size Comfortability

After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Cort Cut Craft's construction favors people with relatively small hands.

Nevertheless, this comes down in the end to personal preference. Make sure you test this guitar—or another one with similar characteristics—before buying.

Scale Length

Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.

Here's the Cort Cut Craft's 25.5" to 25" scale length compared to other common sizes:

The Cort Cut Craft features a multi-scale fingerboard, which means that it incorporates two scale lengths at the same time. This is present in some 7+ strings guitars to give a different tension to the lower strings and the higher strings. The thickest strings need more tension to avoid fret buzz (especially when tuned low), so the scale is longer for these strings, while the thinnest strings will need less tension (because they have a lower gauge), so they have a shorter scale to reduce stiffness for bends.

It can feel awkward if you've never played a multi-scale because the frets will have more separation for the higher strings, but a lot of people love their versatility.

Neck Profile

The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.

It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.

Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.

Fretboard Radius

When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.

The Cort Cut Craft has a 15.748" fingerboard radius.

Here's an image comparing this fretboard radius to other popular choices:

Compound radius fingerboards give the best of both worlds. Unfortunately, the Cort Cut Craft has the same radius across the board.

Nut Width

The Cort Cut Craft has a nut width of 45mm (1.772''). This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.

Frets

It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.

Fret Size

Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.

The Cort Cut Craft's frets are Medium size. With medium frets, you can feel the fretboard more than with jumbo frets, but it's still easier to press the strings cleanly than with small frets; notes might change their pitch just slightly if you press hard on the fret. Also, if you need to do some fret leveling after years of playing, you'll have some room to sand them down without having to replace them.

Playability Score

Tone Analysis

The type of wood and even the shape of the body will have a lot of influence in the final tone of an acoustic guitar. Here's we'll talk about what kind of tone you can expect from its specs.

Wood

Spruce Top: This wood has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range.

Laurel Back and Sides: There are many types of Laurel, but East Indian is the most common for guitar building. Its color can vary from dark to light brown with black lines. Many people find its tonality similar to Rosewood, which favors the warmer frequencies.

Mahogany Neck: This is the type of wood found in many top-of-the-line guitars, so that's a positive point for the build quality. This red-looking wood Mahogany is found in Africa and Central America and has great sustain and a warm tone due to its high density. The downside about this type of wood is that it's relatively heavy.

Ebony Fretboard: This is one of the most expensive woods there is, which is why it's mostly used for fretboards. It is dense, heavy, highly resistant and comes in a really dark color that gives any guitar a classy touch. Tone wise, it helps the high side of the spectrum and provides good sustain.

Pickups

This guitar comes with pickups from one of the top brands: LR Baggs. So you can expect well built pickups with great sound that shouldn't need an upgrade anytime soon.

Sound Score

Build Quality Analysis

Country of Origin

Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.

The Cort Cut Craft is made in Indonesia. Many people prefer the quality of an Indonesian guitar over a Chinese. Respectable brands like Epiphone, Ibanez and Schecter are building in this country because of the great quality and lower price. Some people like to compare them to the ones built in Japan during the 80s, when Japanese guitar makers made a name for themselves.

Bridge

Ebony: The advantage of fixed bridges is that they don't require any kind of set-up. This makes it extremely easy when changing strings because you don't need to adjust anything besides tuning the guitar. Also, the fact that the bridge is directly attached to the body will help to increase sustain. The disadvantage is the lack of versatility since you can't create the same vibrato effects as with tremolo bridges.

Nut Material

Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your guitar. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.

In this case, the Cort Cut Craft has a Bone nut. This material is one of the highest quality you can get. It provides excellent sustain and tune stability if cut well. The only disadvantage is that it's an organic material, so it's not consistent. Two different bone nuts, even if made from the same bone, will probably sound slightly different. However, bear in mind that this is only relevant when playing open strings.

Build Quality Score

User Reviews

Help others by sharing your opinion about this guitar. Note: to avoid spam, your review will be submitted for approval before appearing here.