Swap
Swap
Sterling Majesty Maj200
PRS Custom 24
VS
Playability
73
Sound
75
Build
72
Value
73
Score
73
FIND IT ON:
Reverb logoMusician's Friend logoSweetwater logo
Playability
72
Sound
73
Build
72
Value
57
Score
72
FIND IT ON:
Reverb logoSweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

Sterling Majesty Maj200 vs PRS Custom 24

Reasons to Get
Sterling Majesty Maj200 over PRS Custom 24

Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Release Year
2020 vs 2011
From a more recent year
Neck Profile
John Petrucci vs Pattern Thin
Thin and flat neck for playing fast
Pickup Mods
Boost vs None
Increases the output of the pickup
Nut Width
1.65'' (41.9mm) vs 1.688'' (42.9mm)
Favors small hands, easier bar chords and other shapes
Scale Length
25.5'' (647.7mm) vs 25'' (635mm)
Lower action and brighter natural tone
Fretboard Radius
16'' (406.4mm) vs 10'' (254mm)
Flatter fretboard makes it easier to play single notes and bend
Value Score
73 vs 57
Better price/quality relationship

Reasons to Get
PRS Custom 24 over Sterling Majesty Maj200

Country of Manufacturing
United States vs Indonesia
Built with higher quality standards
Neck Profile
Pattern Thin vs John Petrucci
Comfortable neck that works for most people
Switch Positions
5 vs 3
More tone options
Nut Width
1.688'' (42.9mm) vs 1.65'' (41.9mm)
Less likely to mute strings by accident and more space for fingerstyle
Scale Length
25'' (635mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
10'' (254mm) vs 16'' (406.4mm)
Easier to play chords without muting strings

Other Key Differences
Sterling Majesty Maj200 vs PRS Custom 24

Bridge Pickup
DiMarzio Crunch Lab vs PRS 85/15
Different Bridge Pickup
Neck Pickup
DiMarzio LiquiFire vs PRS 85/15
Different Neck Pickup
Fretboard Wood
Ebony vs Rosewood
Different Fretboard Wood
Headstock
4-2 vs 3-3
Different Headstock
Nut Material
Compensated vs PRS Propietary
Different Nut Material

Shared Features
Sterling Majesty Maj200 vs PRS Custom 24

Body Wood
Mahogany
Same Body Wood
Neck Wood
Mahogany
Same Neck Wood
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
24
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Bridge
Tremolo
Simple vibratos without too much maintenance
Pickups Power
Passive
Cleaner sound and no battery needed
Decorative Top
Figured Maple vs Carved Figured Maple
Finished with beautiful natural wood patterns
Neck Joint
Set
Neck is glued to the body
Type of Frets
Medium Jumbo
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Locking Tuners
  • High-Quality Nut
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Neck-Through Build
  • Weight Relief
  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better for Beginners?

The Sterling Majesty Maj200 meets 6 out of our 8 criteria items for beginner friendliness, while the PRS Custom 24 meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Sterling Majesty Maj200
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

New Player Friendliness

PRS Custom 24
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Woods Used in the Sterling Majesty Maj200

Ebony wood pattern used for guitar building
Ebony

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Woods Used in the PRS Custom 24

Rosewood wood pattern used for guitar building
Rosewood

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Winner: Tie.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

You can purchase similar pickups to the Sterling Majesty Maj200's and use them on any guitar:

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The PRS Custom 24 gives you 5 switch options while the Sterling Majesty Maj200 gives you 3. This means that the PRS Custom 24 gives you more options to find the right pickup combination for the type of sound you want to achieve

Only the Sterling Majesty Maj200 comes with some kind of pickup modification: Boost.

A Boost will give your pickups more output, similar to an active pickup. It's great if you like to use a lot of output for heavy genres, but also like to use a cleaner tone often.

Sterling Majesty Maj200 pickups switch and push knobs diagram
Sterling Majesty Maj200's switch options
PRS Custom 24 pickups switch selector and push knobs diagram
PRS Custom 24's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Sterling Majesty Maj200.

Final Sound Quality Scores

Sterling Majesty Maj200
Pickups 85
Sustain 65
Versatility 74
Tuning Stability 75
Sound 75
PRS Custom 24
Pickups 85
Sustain 65
Versatility 67
Tuning Stability 75
Sound 73

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Sterling Majesty Maj200 compares to the PRS Custom 24.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Sterling Majesty Maj200 is built in Indonesia while the PRS Custom 24 is made in United States.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Winner: PRS Custom 24

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Sterling Majesty Maj200 has a Compensated nut. Each hole where the string sits at the nut is cut at a different distance from the bridge, which compensates for the different amount of tension that each string is subject to. This fixes most intonation issues across the fretboard, so it gives great tuning stability.

On the other hand, the PRS Custom 24 comes with a PRS Propietary nut. It's similar to TUSQ nuts, but they're not as hard, and the tone is not as bright. However, the material is self-lubricating, and it's usually well cut, so they have good tuning stability.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the Sterling Majesty Maj200 is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Sterling Majesty Maj200.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Sterling Majesty Maj200
  • Stainless Steel Frets
  • Locking Tuners
  • Expensive Wood
  • Compensated Nut
  • Top Brand Pickups
  • Boost Pickups
  • Tremolo
  • Made in Indonesia
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
PRS Custom 24
  • Locking Tuners
  • Made in United States
  • Expensive Wood
  • PRS Propietary Nut
  • Top Brand Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Sterling Majesty Maj200
Quality of materials 70
Features 70
Quality Control 75
Build Quality 72
PRS Custom 24
Quality of materials 50
Features 65
Quality Control 100
Build Quality 72

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Sterling Majesty Maj200 Nut Width
Sterling Majesty Maj200 Nut Width
PRS Custom 24 Nut Width
PRS Custom 24 Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the PRS Custom 24 has the wider nut with 42.9mm (1.688'') vs 41.9mm (1.65''). This is a 1mm (0.038'') difference

This means that it will be more difficult to do bar chords on the PRS Custom 24, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Sterling Majesty Maj200's Scale Length
Sterling Majesty Maj200's Scale Length
PRS Custom 24's Scale Length
PRS Custom 24's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Sterling Majesty Maj200 has the longest scale: 25.5". The PRS Custom 24 is only 25" long. This is a 0.5'' (12.7mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Sterling Majesty Maj200 Neck Profile
Sterling Majesty Maj200's neck profile
PRS Custom 24 Neck Profile
PRS Custom 24's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Sterling Majesty Maj200 has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.

The PRS Custom 24, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Sterling Majesty Maj200 Fingerboard Radius
Sterling Majesty Maj200's Fingerboard radius
PRS Custom 24 Fingerboard Radius
PRS Custom 24's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the PRS Custom 24's fingerboard radius is smaller, which means it's more curved than the Sterling Majesty Maj200's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Sterling Majesty Maj200.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the PRS Custom 24 favors large hands more than the Sterling Majesty Maj200.

Sterling Majesty Maj200:
Big Hands
Small Hands
PRS Custom 24:
Big Hands
Small Hands

Fret Size

Sterling Majesty Maj200 and PRS Custom 24 Frets Size
Both have a similar Medium Jumbo fret size

Both have a Medium Jumbo fret size. These are slightly shorter than full Jumbo frets, so you'll still feel the fretboard when pressing down the strings. However, they interfere less with your fretting hand than medium-size frets. This is a good size if you like easy-to-press frets, but would still like to feel a bit of the fretboard when playing.

Final Playability Scores

Sterling Majesty Maj200
Bending & Vibrato Ease 70
Chord Playability 70
Solo Playability 80
Playability 73
PRS Custom 24
Bending & Vibrato Ease 70
Chord Playability 70
Solo Playability 75
Playability 72

Specs Side-by-Side

Sterling Majesty Maj200 vs PRS Custom 24
General Sterling Majesty Maj200 PRS Custom 24
Brand: Sterling PRS
Year: 2020 2011
Configuration: HH HH
Strings: 6 6
Made in: Indonesia United States
Series: John Petrucci Core
Colors: Blue, Red, Purple Gold, White, Black, Blue, Green, Black Burst, Orange, Purple, Yellow, Red Burst, Gold Burst, Dark Cherry Sunburst, McCarty Sunburst, McCarty Tobacco Sunburst
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Mahogany Mahogany
Bridge: Modern Tremolo PRS Patented Tremolo, Gen III
Neck
Neck Joint: Set Set
Tuners: Locking PRS Phase III Locking
Fretboard: Ebony Rosewood
Neck Material: 3-Piece Mahogany Mahogany
Decoration: Custom Jp Inlays Birds
Scale Size: 25.5" 25"
Shape: John Petrucci Pattern Thin
Frets: 24 Medium Jumbo Stainless Steel 24 Medium Jumbo Nickel Silver
Fretboard Radius: 16" 10"
Nut: Compensated PRS Propietary
Nut Width: 41.9mm (1.65'') 42.9mm (1.688'')
Electronics
Bridge Pickup: DiMarzio Crunch Lab (Humbucker / Passive) PRS 85/15 (Humbucker / Passive)
Middle Pickup:
Neck Pickup: DiMarzio LiquiFire (Humbucker / Passive) PRS 85/15 (Humbucker / Passive)
Switch: 3 Way 5 Way
Knobs: Dome Speed
Pickup Mods: Boost None
Volume Controls: 1 1
Tone Controls: 1 1