Swap
Swap
Sire Larry Carlton S7 FM
Schecter C-6 Plus
VS
Playability
67
Sound
69
Build
64
Value
72
Score
67
FIND IT ON:
Reverb logoSweetwater logo
Playability
78
Sound
66
Build
53
Value
76
Score
66
FIND IT ON:
Reverb logoAmazon logoMusician's Friend logoSweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

Sire Larry Carlton S7 FM vs Schecter C-6 Plus

Reasons to Get
Sire Larry Carlton S7 FM over Schecter C-6 Plus

Release Year
2020 vs 2015
From a more recent year
Type of Frets
Medium Jumbo vs XL Jumbo
You'll feel the fretboard when pressing down the strings
Nut Material
Bone vs Graphite
Good quality nut with rich tone
Switch Positions
5 vs 3
More tone options
Pickups
HSS vs HH
High output with beautiful cleans and tone versatility
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.9'' (22.9mm) vs 0.79'' (20.1mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.94'' (23.9mm) vs 0.87'' (22.1mm)
More comfortable at higher frets for big hands
Bridge
Tremolo vs Fixed
Simple vibratos without too much maintenance
Fretboard Radius
9.5'' (241.3mm) vs 14'' (355.6mm)
Easier to play chords without muting strings

Reasons to Get
Schecter C-6 Plus over Sire Larry Carlton S7 FM

Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
XL Jumbo vs Medium Jumbo
You won't feel the fretboard when pressing down the strings
Pickups
HH vs HSS
High output without hum
Number of Frets
24 vs 22
Allows to reach higher notes
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.9'' (22.9mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.87'' (22.1mm) vs 0.94'' (23.9mm)
More comfortable at higher frets for small hands
Bridge
Fixed vs Tremolo
Good sustain and needs no set-up
Fretboard Radius
14'' (355.6mm) vs 9.5'' (241.3mm)
Flatter fretboard makes it easier to play single notes and bend
Value Score
76 vs 72
Better price/quality relationship

Other Key Differences
Sire Larry Carlton S7 FM vs Schecter C-6 Plus

Bridge Pickup
Sire Super-ST Humbucker vs Schecter Diamond Plus
Different Bridge Pickup
Neck Pickup
Sire Super-ST Single Coil vs Schecter Diamond Plus
Different Neck Pickup
Body Wood
Alder vs Basswood
Different Body Wood
Neck Wood
Roasted Maple vs Maple
Different Neck Wood
Fretboard Wood
Roasted Maple vs Rosewood
Different Fretboard Wood
Headstock
6 vs 3-3
Different Headstock
Nut Material
Bone vs Graphite
Different Nut Material

Shared Features
Sire Larry Carlton S7 FM vs Schecter C-6 Plus

Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Nut Width
1.654'' (42mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Pickups Power
Passive
Cleaner sound and no battery needed
Decorative Top
Flamed maple veneer vs Quilted Maple Image
Finished with beautiful natural wood patterns
Neck Profile Type
C
Comfortable neck that works for most people
Neck Joint
Bolt-On
Allows you to detach and swap the neck

Common Weaknesses

  • Neck-Through Build
  • Pickup Alter Switch/Knob
  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • Top Pickup Brand
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

Sire Larry Carlton S7 FM Prices

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better for Beginners?

The Sire Larry Carlton S7 FM meets 7 out of our 8 criteria items for beginner friendliness, while the Schecter C-6 Plus meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Sire Larry Carlton S7 FM
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale

New Player Friendliness

Schecter C-6 Plus
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Sire Larry Carlton S7 FM

Roasted Maple wood pattern used for guitar building
Roasted Maple
Alder wood pattern used for guitar building
Alder

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Woods Used in the Schecter C-6 Plus

Maple wood pattern used for guitar building
Maple
Rosewood wood pattern used for guitar building
Rosewood
Basswood wood pattern used for guitar building
Basswood

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

Winner: Schecter C-6 Plus.

Pickup Configuration

The Sire Larry Carlton S7 FM has an HSS configuration while the Schecter C-6 Plus has HH pickups.

HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The Sire Larry Carlton S7 FM has pickups from a more specialized brand than the Schecter C-6 Plus. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Sire Larry Carlton S7 FM.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Sire Larry Carlton S7 FM gives you 5 switch options while the Schecter C-6 Plus gives you 3. This means that the Sire Larry Carlton S7 FM gives you more options to find the right pickup combination for the type of sound you want to achieve

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

Sire Larry Carlton S7 FM pickups switch selector and push knobs diagram
Sire Larry Carlton S7 FM's switch options
Schecter C-6 Plus pickups switch and push knobs diagram
Schecter C-6 Plus's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Sire Larry Carlton S7 FM.

Final Sound Quality Scores

Sire Larry Carlton S7 FM
Pickups 60
Sustain 70
Versatility 70
Tuning Stability 75
Sound 69
Schecter C-6 Plus
Pickups 55
Sustain 80
Versatility 59
Tuning Stability 70
Sound 66

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Sire Larry Carlton S7 FM compares to the Schecter C-6 Plus.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Sire Larry Carlton S7 FM has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

On the other hand, the Schecter C-6 Plus comes with a Graphite nut. It's a self-lubricating material that will allow the strings to slide over the nut without a lot of friction. It's a good type of nut if you want to have better tuning stability than with plastic, although it's not as resistant as Bone or Tusq.

Winner: Sire Larry Carlton S7 FM.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Sire Larry Carlton S7 FM's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

On the other hand, the Schecter C-6 Plus's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

The Sire Larry Carlton S7 FM has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Sire Larry Carlton S7 FM.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Sire Larry Carlton S7 FM
  • Locking Tuners
  • Bone Nut
  • Tremolo
  • Cheap Fret Wire (NS)
  • Made in Indonesia
  • No Expensive Woods
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter C-6 Plus
  • Expensive Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Sire Larry Carlton S7 FM
Quality of materials 58
Features 65
Quality Control 70
Build Quality 64
Schecter C-6 Plus
Quality of materials 45
Features 50
Quality Control 65
Build Quality 53

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Sire Larry Carlton S7 FM Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').

This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Scale Length

Sire Larry Carlton S7 FM and Schecter C-6 Plus's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Sire Larry Carlton S7 FM Neck Profile
Sire Larry Carlton S7 FM's neck profile
Schecter C-6 Plus Neck Profile
Schecter C-6 Plus's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Sire Larry Carlton S7 FM and the Schecter C-6 Plus have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Sire Larry Carlton S7 FM Fingerboard Radius
Sire Larry Carlton S7 FM's Fingerboard radius
Schecter C-6 Plus Fingerboard Radius
Schecter C-6 Plus's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Sire Larry Carlton S7 FM's fingerboard radius is smaller, which means it's more curved than the Schecter C-6 Plus's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter C-6 Plus.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Sire Larry Carlton S7 FM favors large hands more than the Schecter C-6 Plus.

Sire Larry Carlton S7 FM:
Big Hands
Small Hands
Schecter C-6 Plus:
Big Hands
Small Hands

Fret Size

Sire Larry Carlton S7 FM Frets Size
Sire Larry Carlton S7 FM's Frets Size
Schecter C-6 Plus Frets Size
Schecter C-6 Plus's Frets Size

The Schecter C-6 Plus has XL Jumbo frets, which should be taller than the Sire Larry Carlton S7 FM's Medium Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Sire Larry Carlton S7 FM
Bending & Vibrato Ease 60
Chord Playability 80
Solo Playability 60
Playability 67
Schecter C-6 Plus
Bending & Vibrato Ease 85
Chord Playability 60
Solo Playability 90
Playability 78

Specs Side-by-Side

Sire Larry Carlton S7 FM vs Schecter C-6 Plus
General Sire Larry Carlton S7 FM Schecter C-6 Plus
Brand: Sire Schecter
Year: 2020 2015
Configuration: HSS HH
Strings: 6 6
Made in: Indonesia Indonesia
Series: S7 C-6 Plus/Deluxe
Colors: Black, Blue, Natural Black Burst, Blue Burst, Purple, Red Burst, C 6 Plus Vintage Sunburst Detail
Left-Handed Version: No Yes
Body
Type: Solid Body Solid Body
Body Material: Alder Basswood
Bridge: Sire Modern Tremolo Bridge (2 Post Type) Tune-O-Matic w/ String Thru Body
Neck
Neck Joint: Bolt-On Bolt-On
Tuners: Sire Premium Locking Tuner Schecter
Fretboard: Roasted Hard Maple Rosewood
Neck Material: Roasted Hard Maple Maple
Decoration: Abalone dot 4mm Dots
Scale Size: 25.5" 25.5"
Shape: C-Shape Thin C
Thickness: 1st Fret: 0.9'' (22.9mm) - 12th Fret: 0.94'' (23.9mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 22 Medium Jumbo Nickel Silver 24 XL Jumbo Nickel Silver
Fretboard Radius: 9.5" 14"
Nut: Bone Graphite
Nut Width: 42mm (1.654'') 42mm (1.654'')
Electronics
Bridge Pickup: Sire Super-ST Humbucker (Humbucker / Passive) Schecter Diamond Plus (Humbucker / Passive)
Middle Pickup: Sire Super-ST Single Coil (Single Coil / Passive)
Neck Pickup: Sire Super-ST Single Coil (Single Coil / Passive) Schecter Diamond Plus (Humbucker / Passive)
Switch: 5 Way 3 Way
Knobs: Bell Dome
Pickup Mods: None None
Volume Controls: 1 1
Tone Controls: 1 1