Sire Larry Carlton L7 vs Schecter Solo-II Supreme
Reasons to Get
Sire Larry Carlton L7 over Schecter Solo-II Supreme
Reasons to Get
Schecter Solo-II Supreme over Sire Larry Carlton L7
Other Key Differences
Sire Larry Carlton L7 vs Schecter Solo-II Supreme
Shared Features
Sire Larry Carlton L7 vs Schecter Solo-II Supreme
Common Strengths
- High-Quality Nut
- High-Quality Frets
- Expensive Wood
Common Weaknesses
- Neck-Through Build
- Weight Relief
- Stays in Tune (Evertune)
- From a High-Quality-Standards Country
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Table of Contents
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Which One is Better Overall?
After going through our comparison algorithm, the results show that the Schecter Solo-II Supreme is probably the better product overall with its final score of 77 compared to the Sire Larry Carlton L7's 68 score, although not by a lot.
The Schecter Solo-II Supreme wins when it comes to sound, playability, build quality. On the other hand, the Sire Larry Carlton L7 has the upper hand when it comes to value for the money.
If you got small hands, you'll probably feel more comfortable playing the Schecter Solo-II Supreme.
Which One is Better for Beginners?
If you're looking for your first guitar to learn how to play, the Schecter Solo-II Supreme is the better choice.
The Schecter Solo-II Supreme meets 6 out of our 8 criteria items for beginner friendliness, while the Sire Larry Carlton L7 meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Sire Larry Carlton L7- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
New Player Friendliness
Schecter Solo-II Supreme- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
- Locking tuners
Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.
Sire Larry Carlton L7 Overview
- From Sire's 2020 L7 series
- Larry Carlton Signature
- Made in Indonesia
- 6 strings
- 24.75"'' scale
- 12" Fretboard Radius
- Flamed Veneer top
- Mahogany+Hard Maple body
- Mahogany neck
- Ebony fretboard
- Bridge pickup: Larry Carlton Modern Humbucker (Humbucker/Passive)
- Neck pickup: Larry Carlton Modern Humbucker (Humbucker/Passive)
- 2 volume and 2 tone Speed knobs
- 3-way Switch
- Sire Modern Tune-O-Matic & Aluminium Stop Tail Piece bridge
- C-Shape Set neck
- 22 Medium Jumbo frets
- Sire Premium Locking Tuner tuners
- Compare Specs >
Schecter Solo-II Supreme Overview
- From Schecter's 2022 Solo-II Supreme series
- Made in Indonesia
- 6 strings
- 24.75"'' scale
- 12" to 16" Fretboard Radius
- Flamed Maple top
- Mahogany body
- Mahogany 3-pc neck
- Ebony fretboard
- Bridge pickup: Lundgren Black Heaven (Humbucker/Passive)
- Neck pickup: Lundgren Black Heaven (Humbucker/Passive)
- 2 volume and 1 tone Dome knobs
- 3-way Switch
- TonePros T3BT Tune-O-Matic T1Z Tailpiece bridge
- Thick C Set neck
- 22 XL Jumbo Stainless Steel frets
- Graph Tech Ratio tuners
- Weight between 8.4lbs (3.8kgs) and 9.1lbs (4.1kgs)
- Compare Specs >
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Winner: Tie.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
The Schecter Solo-II Supreme pickups from a more specialized brand than the Sire Larry Carlton L7. Its pickups should give you a fuller, richer sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Schecter Solo-II Supreme.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Only the Schecter Solo-II Supreme comes with some kind of pickup modification: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Schecter Solo-II Supreme.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Sire Larry Carlton L7 compares to the Schecter Solo-II Supreme.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Sire Larry Carlton L7 has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
On the other hand, the Schecter Solo-II Supreme comes with a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Schecter Solo-II Supreme is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Schecter Solo-II Supreme.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Sire Larry Carlton L7 has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Sire Larry Carlton L7.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Sire Larry Carlton L7
- Locking Tuners
- Expensive Wood
- Bone Nut
- Cheap Fret Wire (NS)
- Made in Indonesia
- No Top Brand Pickups
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Schecter Solo-II Supreme
- Stainless Steel Frets
- Expensive Wood
- Ivory Tusq Nut
- Top Brand Pickups
- Coil Split Pickups
- Compound Radius Fretboard
- No Locking Tuners
- Made in Indonesia
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Sire Larry Carlton L7 has the wider nut with 43mm (1.693'') vs 41.7mm (1.643''). This is a 1.3mm (0.05'') difference
This means that it will be more difficult to do bar chords on the Sire Larry Carlton L7, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 24.75".
This is the scale length that Gibson uses for most of its Les Paul guitars. It's a smaller scale than the typical Stratocaster's 25.5''. Short scale lengths like this make it easier to bend the strings, which is pretty important if you have a fixed bridge. They also have a shorter fret separation, which makes it easier to change position fast at the fretboard.
On the other hand, a shorter scale like this one will make fret buzz more likely, which can affect you if you want to use thicker string gauges.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Sire Larry Carlton L7 and the Schecter Solo-II Supreme have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Schecter Solo-II Supreme is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.
Hand Size Comfortability
Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Sire Larry Carlton L7 favors large hands more than the Schecter Solo-II Supreme.
Sire Larry Carlton L7:
Schecter Solo-II Supreme:
Fret Size
The Schecter Solo-II Supreme has XL Jumbo frets, which should be taller than the Sire Larry Carlton L7's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
