Schecter Traditional Pro vs Jackson X Series Soloist Arch Top SLAT7 MS
Reasons to Get
Schecter Traditional Pro over Jackson X Series Soloist Arch Top SLAT7 MS
Reasons to Get
Jackson X Series Soloist Arch Top SLAT7 MS over Schecter Traditional Pro
Other Key Differences
Schecter Traditional Pro vs Jackson X Series Soloist Arch Top SLAT7 MS
Shared Features
Schecter Traditional Pro vs Jackson X Series Soloist Arch Top SLAT7 MS
Common Strengths
- Top Pickup Brand
Common Weaknesses
- Pickup Alter Switch/Knob
- Weight Relief
- Stays in Tune (Evertune)
- High-Quality Frets
- From a High-Quality-Standards Country
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Table of Contents
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Which One is Better Overall?
After going through our comparison algorithm, the results show that both instruments scored 72 out of 100, which makes them similar in terms of quality.
The Jackson X Series Soloist Arch Top SLAT7 MS wins when it comes to playability. On the other hand, the Schecter Traditional Pro has the upper hand when it comes to sound, build quality.
If you got small hands, you'll probably feel that the Schecter Traditional Pro is easier to play.
Which One is Better for Beginners?
If you're looking for your first guitar to learn how to play, the Schecter Traditional Pro is the better choice.
The Schecter Traditional Pro meets 6 out of our 8 criteria items for beginner friendliness, while the Jackson X Series Soloist Arch Top SLAT7 MS meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Schecter Traditional Pro- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
New Player Friendliness
Jackson X Series Soloist Arch Top SLAT7 MS- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Narrow nut
- Short scale
- Locking tuners
Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.
Schecter Traditional Pro Overview
- From Schecter's 2023 Traditional Pro series
- Made in Indonesia
- 6 strings
- 25.5"'' scale
- 14" Fretboard Radius
- Flamed Maple top
- Alder body
- Roasted Maple w/ Carbon Fiber Reinforcement Rods neck
- Ebony fretboard
- Bridge pickup: Schecter USA Z-Plus (Humbucker/Passive)
- Neck pickup: Schecter USA Z-Plus (Humbucker/Passive)
- 1 volume and 1 tone Dome knobs
- 5-way Switch
- Diamond Vintage Tremolo bridge
- Thin C Bolt-On neck
- 22 Jumbo frets
- Schecter Locking tuners
- Weight between 7.55lbs (3.4kgs) and 7.85lbs (3.6kgs)
- Compare Specs >
Jackson X Series Soloist Arch Top SLAT7 MS Overview
- From Jackson's 2020 X series
- Made in Indonesia
- 7 strings
- 27" to 25.5"'' scale
- 12" to 16" Fretboard Radius
- Poplar body
- Maple neck
- Laurel fretboard
- Bridge pickup: EMG 808 (Humbucker/Active)
- Neck pickup: EMG 808 (Humbucker/Active)
- 1 volume and 1 tone Dome knobs
- 3-way Switch
- Staggered Individual Saddles bridge
- Jackson Standard Neck-Through neck
- 24 Jumbo frets
- Jackson Sealed Die-Cast tuners
- Compare Specs >
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in the Schecter Traditional Pro
Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Woods Used in the Jackson X Series Soloist Arch Top SLAT7 MS
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
There are many types of Laurel, but East Indian is the most common for guitar building. Its color can vary from dark to light brown with black lines. Many people find its tonality similar to Rosewood, which favors the warmer frequencies. Find out more about Laurel.
Poplar is a cheaper and heavier alternative to Alder wood. It terms of tone, it emphasizes the low-end and has cutting mids. It's relatively soft compared to most body woods. Find out more about Poplar.
Winner: Schecter Traditional Pro.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Schecter Traditional Pro has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
We found the same or similar pickups to the Jackson X Series Soloist Arch Top SLAT7 MS's online:
The Schecter Traditional Pro's pickups are Passive while the Jackson X Series Soloist Arch Top SLAT7 MS's are Active.
Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.
Winner: Schecter Traditional Pro.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Schecter Traditional Pro gives you 5 switch options while the Jackson X Series Soloist Arch Top SLAT7 MS gives you 3. This means that the Schecter Traditional Pro gives you more options to find the right pickup combination for the type of sound you want to achieve
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Schecter Traditional Pro.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Traditional Pro compares to the Jackson X Series Soloist Arch Top SLAT7 MS.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Schecter Traditional Pro has a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
On the other hand, the Jackson X Series Soloist Arch Top SLAT7 MS comes with a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.
Winner: Schecter Traditional Pro.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Schecter Traditional Pro's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
On the other hand, the Jackson X Series Soloist Arch Top SLAT7 MS's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Schecter Traditional Pro has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Schecter Traditional Pro.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Schecter Traditional Pro has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
On the other hand, the Jackson X Series Soloist Arch Top SLAT7 MS comes with Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
Winner: Jackson X Series Soloist Arch Top SLAT7 MS.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Schecter Traditional Pro
- Locking Tuners
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Tremolo
- Cheap Fret Wire (NS)
- Made in Indonesia
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Jackson X Series Soloist Arch Top SLAT7 MS
- Top Brand Pickups
- Neck-Through Build
- Compound Radius Fretboard
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Expensive Woods
- No High-Quality Nut
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Jackson X Series Soloist Arch Top SLAT7 MS has the wider nut with 47.6mm (1.875'') vs 42mm (1.654''). This is a 5.6mm (0.221'') difference
This means that it will be more difficult to do bar chords on the Jackson X Series Soloist Arch Top SLAT7 MS, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, the Jackson X Series Soloist Arch Top SLAT7 MS features a multi-scale of 27" to 25.5" while the Schecter Traditional Pro has a regular scale of 25.5".
A multi-scale fingerboard incorporates two scale lengths at the same time. This is present in some instruments with long scale to give a different tension to the lower strings than the higher strings. The thickest strings need more tension to avoid fret buzz (especially when tuned low), so the scale is longer for these strings, while the thinnest strings will need less tension (because they have a lower gauge), so they have a shorter scale to reduce stiffness for bends.
It can feel awkward if you've never played a multi-scale because the frets will have more separation for the higher strings, but a lot of people love their versatility.
On the other hand, the Schecter Traditional Pro's 25.5" regular scale means it has a fixed scale for all the strings.This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Schecter Traditional Pro has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
The Jackson X Series Soloist Arch Top SLAT7 MS, on the other hand, has a D neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Jackson X Series Soloist Arch Top SLAT7 MS is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.
Hand Size Comfortability
Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Jackson X Series Soloist Arch Top SLAT7 MS favors large hands more than the Schecter Traditional Pro. But it's still more comfortable for people with small hands, as you can see in the score meter below.
Schecter Traditional Pro:
Jackson X Series Soloist Arch Top SLAT7 MS:
Fret Size
Both have a Jumbo fret size. This is one of the tallest frets you can get. You won't feel the fretboard when pressing down the strings. It will give you the best sustain and all types of chords will be easier to play. However, you can end up changing the pitch of your notes if you press too hard, which is something people used to feeling the fretboard do when trying Jumbo frets for the first time.
