Show Full Spec Comparison
Schecter PT SLS Elite | 006 FR SGR | |
---|---|---|
General | ||
Brand: | Schecter | Schecter |
Year: | 2018 | 2014 |
Configuration: | HH | HH |
Strings: | 6 | 6 |
Made in: | South Korea | China |
Series: | SLS Elite | SGR |
Colors: | Black, Orange | Black, Red, Black Satin, Gloss Black |
Left-Handed Version: | No | No |
Body | ||
Type: | Solid Body | Solid Body |
Body Material: | Swamp Ash | Basswood |
Bridge: | Hipshot Hardtail (.125) w/ String Thru Body | SGR by Floyd Rose |
Neck | ||
Neck Joint: | Neck-Through | Bolt-On |
Tuners: | Schecter Locking | Schecter |
Fretboard: | Ebony | Rosewood |
Neck Material: | Maple/Walnut/Padauk Multi-ply w/ Carbon Fiber Reinforcement Rods | Maple |
Decoration: | Abalone Offset/Reverse Dots | Pearloid Dots w/Gothic Cross at 12th Fret |
Scale Size: | 25.5" | 25.5" |
Shape: | Ultra Thin C | Thin C |
Thickness: | 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm) | 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm) |
Frets: | 24 XL Jumbo Stainless Steel | 22 Medium Nickel Silver |
Fretboard Radius: | 12" to 16" | 14" |
Nut: | Compensated | Locking |
Nut Width: | 42mm (1.654'') | 41.3mm (1.625'') |
Electronics | ||
Bridge Pickups: | Fishman Fluence Modern Ceramic (Humbucker / Active) | Schecter Diamond Plus (Humbucker / Passive) |
Middle Pickup: | ||
Neck Pickup: | Fishman Fluence Modern Alnico (Humbucker / Active) | Schecter Diamond Plus (Humbucker / Passive) |
Switch: | 3 Way | 3 Way |
Knobs: | Dome | Dome |
Pickup Mods: | Multi-Voicing | None |
Volume Controls: | 1 | 1 |
Tone Controls: | 1 | 1 |
Hardware | ||
Strap Lock: | No | No |
Hardware Color: | Black | Black & Chrome |
Show Diagrams Comparison
Reasons to Get
Schecter PT SLS Elite over 006 FR SGR
Reasons to Get
Schecter 006 FR SGR over PT SLS Elite
Other Key Differences
Schecter PT SLS Elite vs 006 FR SGR
Shared Features
Schecter PT SLS Elite vs 006 FR SGR
Common Strengths
- High-Quality Nut
- Expensive Wood
Common Weaknesses
- Weight Relief
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Schecter PT SLS Elite:
Schecter 006 FR SGR:
Beginner Friendliness
The Schecter PT SLS Elite meets 7 out of our 8 criteria items for beginner friendliness, while the Schecter 006 FR SGR meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Schecter PT SLS Elite- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
New Player Friendliness
Schecter 006 FR SGR- Comfortable shape
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
- Easy-to-use bridge
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Woods Used in the Schecter PT SLS Elite
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.
Woods Used in the Schecter 006 FR SGR
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.
Winner: Schecter PT SLS Elite.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
The Schecter PT SLS Elite has pickups from a more specialized brand than the Schecter 006 FR SGR. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Heavy Metal and similar genres.
You can purchase similar pickups to the Schecter PT SLS Elite's and use them on any guitar:
The Schecter PT SLS Elite's pickups are Active while the Schecter 006 FR SGR's are Passive.
Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.
Winner: Schecter PT SLS Elite.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Only the Schecter PT SLS Elite comes with some kind of pickup modification: Multi-Voicing.
Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Schecter 006 FR SGR.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter PT SLS Elite compares to the Schecter 006 FR SGR.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Schecter PT SLS Elite is built in South Korea while the Schecter 006 FR SGR is made in China.
South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.
China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.
Winner: Schecter PT SLS Elite
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Schecter PT SLS Elite has a Compensated nut. Each hole where the string sits at the nut is cut at a different distance from the bridge, which compensates for the different amount of tension that each string is subject to. This fixes most intonation issues across the fretboard, so it gives great tuning stability.
On the other hand, the Schecter 006 FR SGR comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Schecter PT SLS Elite is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Schecter PT SLS Elite.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Schecter PT SLS Elite's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the Schecter 006 FR SGR's is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Schecter 006 FR SGR.
Tuners
The Schecter PT SLS Elite has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Nevertheless, the Schecter 006 FR SGR has a locking nut, so it should have even better tune stability and doesn't need locking tuners.
Winner: Schecter PT SLS Elite.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Schecter PT SLS Elite has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
On the other hand, the Schecter 006 FR SGR comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Schecter PT SLS Elite.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Schecter PT SLS Elite
- Stainless Steel Frets
- Locking Tuners
- Expensive Wood
- Compensated Nut
- Top Brand Pickups
- Neck-Through Build
- Multi-Voicing Pickups
- Compound Radius Fretboard
- Made in South Korea
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No 21:1 Tuner Ratio
- No Strap Lock
Schecter 006 FR SGR
- Expensive Wood
- Locking Nut
- Tremolo
- Retainer Bar
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No Top Brand Pickups
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Schecter PT SLS Elite has the wider nut with 42mm (1.654'') vs 41.3mm (1.625''). This is a 0.7mm (0.029'') difference
This means that it will be more difficult to do bar chords on the Schecter PT SLS Elite, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Schecter PT SLS Elite and the Schecter 006 FR SGR have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Schecter PT SLS Elite is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.
Fret Size
The Schecter PT SLS Elite has XL Jumbo frets, which should be taller than the Schecter 006 FR SGR's Medium frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.