Swap
Swap
Schecter C-8 Multiscale SLS Elite Evil Twin
Fender Player Lead III
VS
Playability
82
Sound
77
Build
79
Value
74
Score
79
FIND IT ON:
Reverb logoSweetwater logo
Playability
68
Sound
75
Build
64
Value
74
Score
69
FIND IT ON:
Reverb logoMusician's Friend logoAmazon logoSweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

Schecter C-8 Multiscale SLS Elite Evil Twin vs Fender Player Lead III

Reasons to Get
Schecter C-8 Multiscale SLS Elite Evil Twin over Fender Player Lead III

Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Release Year
2022 vs 2018
From a more recent year
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
XL Jumbo vs Medium Jumbo
You won't feel the fretboard when pressing down the strings
Scale Length
27" to 25.5" vs 25.5"
Less fret buzz with less string stiffness
Pickup Mods
Multi-Voicing vs Coil Split
Changes the voice (tones or gain) of the pickups
Neck Joint
Neck-Through vs Bolt-On
Stronger neck and easier access to upper frets
Strings
8 vs 6
Allows you to play lower notes
Number of Frets
24 vs 22
Allows to reach higher notes
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.748'' (19mm) vs 0.82'' (20.8mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.787'' (20mm) vs 0.87'' (22.1mm)
More comfortable at higher frets for small hands
Nut Width
2.126'' (54mm) vs 1.654'' (42mm)
Less likely to mute strings by accident and more space for fingerstyle
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Fretboard Radius
20'' (508mm) vs 9.5'' (241.3mm)
Flatter fretboard makes it easier to play single notes and bend
Pickups Power
Active vs Passive
More output

Reasons to Get
Fender Player Lead III over Schecter C-8 Multiscale SLS Elite Evil Twin

Type of Frets
Medium Jumbo vs XL Jumbo
You'll feel the fretboard when pressing down the strings
Scale Length
25.5" vs 27" to 25.5"
Easier to adapt to
Nut Material
Synthetic Bone vs Graphite
Good quality nut with rich tone
Pickup Mods
Coil Split vs Multi-Voicing
Splits humbuckers into single coil pickups
Strings
6 vs 8
Narrower neck and fewer strings to change
Neck Thickness at 1st Fret
0.82'' (20.8mm) vs 0.748'' (19mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.87'' (22.1mm) vs 0.787'' (20mm)
More comfortable at higher frets for big hands
Nut Width
1.654'' (42mm) vs 2.126'' (54mm)
Favors small hands, easier bar chords and other shapes
Fretboard Radius
9.5'' (241.3mm) vs 20'' (508mm)
More curved fretboard helpful to play chords without muting strings
Pickups Power
Passive vs Active
Cleaner sound and no battery needed

Other Key Differences
Schecter C-8 Multiscale SLS Elite Evil Twin vs Fender Player Lead III

Bridge Pickup
Fishman Fluence Modern Ceramic vs Fender Player Series Alnico 2 Humbucking
Different Bridge Pickup
Neck Pickup
Fishman Fluence Modern Alnico vs Fender Player Series Alnico 2 Humbucking
Different Neck Pickup
Body Wood
Ash vs Alder
Different Body Wood
Fretboard Wood
Ebony vs Pau Ferro
Different Fretboard Wood
Headstock
4-4 vs 6
Different Headstock
Nut Material
Graphite vs Synthetic Bone
Different Nut Material

Shared Features
Schecter C-8 Multiscale SLS Elite Evil Twin vs Fender Player Lead III

Neck Wood
Maple
Same Neck Wood
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Neck Profile Type
C
Comfortable neck that works for most people

Common Strengths

  • Top Pickup Brand

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

Schecter C-8 Multiscale SLS Elite Evil Twin Prices

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Schecter C-8 Multiscale SLS Elite Evil Twin is probably the better product overall with its final score of 79 compared to the Fender Player Lead III's 69 score, which is a significant difference.

The Schecter C-8 Multiscale SLS Elite Evil Twin wins when it comes to sound, playability, build quality. On the other hand, the Fender Player Lead III has the upper hand when it comes to.

If you got small hands, you'll probably feel that the Fender Player Lead III is easier to play.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Fender Player Lead III is the better choice.

The Fender Player Lead III meets 6 out of our 8 criteria items for beginner friendliness, while the Schecter C-8 Multiscale SLS Elite Evil Twin meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Schecter C-8 Multiscale SLS Elite Evil Twin
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale

New Player Friendliness

Fender Player Lead III
  • Comfortable shape
  • Easy-to-use bridge
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Schecter C-8 Multiscale SLS Elite Evil Twin Overview

  • From Schecter's 2022 SLS Elite series
  • Made in South Korea
  • 8 strings
  • 27" to 25.5"'' scale
  • 20" Fretboard Radius
  • Swamp Ash body
  • Maple/Walnut/Padauk Multi-ply w/ Carbon Fiber Reinforcement Rods neck
  • Ebony fretboard
  • Bridge pickup: Fishman Fluence Modern Ceramic (Humbucker/Active)
  • Neck pickup: Fishman Fluence Modern Alnico (Humbucker/Active)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Hipshot Hardtail (.125) w/ String Thru Body bridge
  • Ultra Thin C Neck-Through neck
  • 24 XL Jumbo Stainless Steel frets
  • Schecter Locking tuners
  • Compare Specs >

Fender Player Lead III Overview

  • From Fender's 2018 Player series
  • Made in Mexico
  • 6 strings
  • 25.5"'' scale
  • 9.5" Fretboard Radius
  • Alder body
  • Maple neck
  • Pau Ferro fretboard
  • Bridge pickup: Fender Player Series Alnico 2 Humbucking (Humbucker/Passive)
  • Neck pickup: Fender Player Series Alnico 2 Humbucking (Humbucker/Passive)
  • 1 volume and 1 tone Bell knobs
  • 3-way Switch
  • 6-Saddle String-Through-Body Hardtail With Block Saddles bridge
  • Modern C Bolt-On neck
  • 22 Medium Jumbo frets
  • Fender Vintage F Stamped tuners
  • Weight between 6.95lbs (3.2kgs) and 7.5lbs (3.4kgs)
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Woods Used in the Schecter C-8 Multiscale SLS Elite Evil Twin

Ebony wood pattern used for guitar building
Ebony
Ash wood pattern used for guitar building
Ash

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.

Woods Used in the Fender Player Lead III

Pau Ferro wood pattern used for guitar building
Pau Ferro
Alder wood pattern used for guitar building
Alder

Pau Ferro has a dark, chocolate-like color with straight dark grains that is being used as a replacement to Rosewood due to the regulations. It produces a warm tone that is somewhere between Mahogany and Rosewood. Find out more about Pau Ferro.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Winner: Schecter C-8 Multiscale SLS Elite Evil Twin.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the Fender Player Lead III has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

You can purchase similar pickups to the Schecter C-8 Multiscale SLS Elite Evil Twin's and use them on any guitar:

The Schecter C-8 Multiscale SLS Elite Evil Twin's pickups are Active while the Fender Player Lead III's are Passive.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: Fender Player Lead III.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Both give you different pickup mod options.

The Schecter C-8 Multiscale SLS Elite Evil Twin offers Multi-Voicing.

Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.

On the other hand, the Fender Player Lead III comes with the following: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

Schecter C-8 Multiscale SLS Elite Evil Twin pickups switch and push knobs diagram
Schecter C-8 Multiscale SLS Elite Evil Twin's switch options
Fender Player Lead III pickups switch and push knobs diagram
Fender Player Lead III's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Fender Player Lead III.

Final Sound Quality Scores

Schecter C-8 Multiscale SLS Elite Evil Twin
Pickups 85
Sustain 85
Versatility 59
Tuning Stability 80
Sound 77
Fender Player Lead III
Pickups 90
Sustain 75
Versatility 64
Tuning Stability 70
Sound 75

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter C-8 Multiscale SLS Elite Evil Twin compares to the Fender Player Lead III.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Schecter C-8 Multiscale SLS Elite Evil Twin is built in South Korea while the Fender Player Lead III is made in Mexico.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Schecter C-8 Multiscale SLS Elite Evil Twin has a Graphite nut. It's a self-lubricating material that will allow the strings to slide over the nut without a lot of friction. It's a good type of nut if you want to have better tuning stability than with plastic, although it's not as resistant as Bone or Tusq.

On the other hand, the Fender Player Lead III comes with a Synthetic Bone nut. Bone is the best natural material for guitar nuts. However, its tonal properties can be inconsistent. That's the problem that synthetic bone fixes. This is much better than using a plastic nut because the nut is more slippery—which helps with tuning stability—, and it gives your open strings rich harmonics.

Winner: Fender Player Lead III.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the Schecter C-8 Multiscale SLS Elite Evil Twin is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Schecter C-8 Multiscale SLS Elite Evil Twin.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

The Schecter C-8 Multiscale SLS Elite Evil Twin has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Schecter C-8 Multiscale SLS Elite Evil Twin.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Schecter C-8 Multiscale SLS Elite Evil Twin has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

On the other hand, the Fender Player Lead III comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Schecter C-8 Multiscale SLS Elite Evil Twin.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Schecter C-8 Multiscale SLS Elite Evil Twin
  • Stainless Steel Frets
  • Locking Tuners
  • Expensive Wood
  • Top Brand Pickups
  • Neck-Through Build
  • Multi-Voicing Pickups
  • Luminescent Inlay
  • Made in South Korea
  • No High-Quality Nut
  • No Weight Relief
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Fender Player Lead III
  • Synthetic Bone Nut
  • Top Brand Pickups
  • Coil Split Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Mexico
  • No Expensive Woods
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Schecter C-8 Multiscale SLS Elite Evil Twin
Quality of materials 71
Features 85
Quality Control 80
Build Quality 79
Fender Player Lead III
Quality of materials 66
Features 55
Quality Control 70
Build Quality 64

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Schecter C-8 Multiscale SLS Elite Evil Twin Nut Width
Schecter C-8 Multiscale SLS Elite Evil Twin Nut Width
Fender Player Lead III Nut Width
Fender Player Lead III Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Schecter C-8 Multiscale SLS Elite Evil Twin has the wider nut with 54mm (2.126'') vs 42mm (1.654''). This is a 12mm (0.472'') difference

This means that it will be more difficult to do bar chords on the Schecter C-8 Multiscale SLS Elite Evil Twin, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Schecter C-8 Multiscale SLS Elite Evil Twin's Scale Length
Schecter C-8 Multiscale SLS Elite Evil Twin's Scale Length
Fender Player Lead III's Scale Length
Fender Player Lead III's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, the Schecter C-8 Multiscale SLS Elite Evil Twin features a multi-scale of 27" to 25.5" while the Fender Player Lead III has a regular scale of 25.5".

A multi-scale fingerboard incorporates two scale lengths at the same time. This is present in some instruments with long scale to give a different tension to the lower strings than the higher strings. The thickest strings need more tension to avoid fret buzz (especially when tuned low), so the scale is longer for these strings, while the thinnest strings will need less tension (because they have a lower gauge), so they have a shorter scale to reduce stiffness for bends.

It can feel awkward if you've never played a multi-scale because the frets will have more separation for the higher strings, but a lot of people love their versatility.

On the other hand, the Fender Player Lead III's 25.5" regular scale means it has a fixed scale for all the strings.This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Schecter C-8 Multiscale SLS Elite Evil Twin Neck Profile
Schecter C-8 Multiscale SLS Elite Evil Twin's neck profile
Fender Player Lead III Neck Profile
Fender Player Lead III's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Schecter C-8 Multiscale SLS Elite Evil Twin and the Fender Player Lead III have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Schecter C-8 Multiscale SLS Elite Evil Twin Fingerboard Radius
Schecter C-8 Multiscale SLS Elite Evil Twin's Fingerboard radius
Fender Player Lead III Fingerboard Radius
Fender Player Lead III's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Fender Player Lead III's fingerboard radius is smaller, which means it's more curved than the Schecter C-8 Multiscale SLS Elite Evil Twin's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter C-8 Multiscale SLS Elite Evil Twin.

Still, both are closer to a Stratocaster radius than a Les Paul, so both of them will favor chord playing rather than soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Schecter C-8 Multiscale SLS Elite Evil Twin favors large hands more than the Fender Player Lead III.

Schecter C-8 Multiscale SLS Elite Evil Twin:
Big Hands
Small Hands
Fender Player Lead III:
Big Hands
Small Hands

Fret Size

Schecter C-8 Multiscale SLS Elite Evil Twin Frets Size
Schecter C-8 Multiscale SLS Elite Evil Twin's Frets Size
Fender Player Lead III Frets Size
Fender Player Lead III's Frets Size

The Schecter C-8 Multiscale SLS Elite Evil Twin has XL Jumbo frets, which should be taller than the Fender Player Lead III's Medium Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Schecter C-8 Multiscale SLS Elite Evil Twin
Bending & Vibrato Ease 90
Chord Playability 55
Solo Playability 100
Playability 82
Fender Player Lead III
Bending & Vibrato Ease 65
Chord Playability 80
Solo Playability 60
Playability 68

Specs Side-by-Side

Schecter C-8 Multiscale SLS Elite Evil Twin vs Fender Player Lead III
General Schecter C-8 Multiscale SLS Elite Evil Twin Fender Player Lead III
Brand: Schecter Fender
Year: 2022 2018
Configuration: HH HH
Strings: 8 6
Made in: South Korea Mexico
Series: SLS Elite Player
Colors: Black Satin White, Sunburst, Purple
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Swamp Ash Alder
Bridge: Hipshot Hardtail (.125) w/ String Thru Body 6-Saddle String-Through-Body Hardtail With Block Saddles
Neck
Neck Joint: Neck-Through Bolt-On
Tuners: Schecter Locking Fender Vintage F Stamped
Fretboard: Ebony Pau Ferro
Neck Material: Maple/Walnut/Padauk Multi-ply w/ Carbon Fiber Reinforcement Rods Maple
Decoration: Roman Numerals White Dot
Scale Size: 27" to 25.5" 25.5"
Shape: Ultra Thin C Modern C
Thickness: 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm) 1st Fret: 0.82'' (20.8mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 24 XL Jumbo Stainless Steel 22 Medium Jumbo Nickel Silver
Fretboard Radius: 20" 9.5"
Nut: Graphite Synthetic Bone
Nut Width: 54mm (2.126'') 42mm (1.654'')
Electronics
Bridge Pickup: Fishman Fluence Modern Ceramic (Humbucker / Active) Fender Player Series Alnico 2 Humbucking (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Fishman Fluence Modern Alnico (Humbucker / Active) Fender Player Series Alnico 2 Humbucking (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Bell
Pickup Mods: Multi-Voicing Coil Split
Volume Controls: 1 1
Tone Controls: 1 1