Swap
Swap
Reverend Crosscut W
ESP Iron Cross
VS
Playability
70
Sound
78
Build
65
Value
71
Score
71
FIND IT ON:
Reverb logoSweetwater logo
Playability
80
Sound
79
Build
78
Value
64
Score
79
FIND IT ON:
Reverb logoSweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

Reverend Crosscut W vs ESP Iron Cross

Reasons to Get
Reverend Crosscut W over ESP Iron Cross

Release Year
2021 vs 2014
From a more recent year
Neck Profile
Medium Oval vs Thin U
Comfortable neck that works for most people
Neck Joint
Bolt-On vs Set
Allows you to detach and swap the neck
Tone Knobs
2 vs 1
More tone control
Neck Thickness at 1st Fret
0.85'' (21.6mm) vs 0.787'' (20mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.9'' (22.9mm) vs 0.866'' (22mm)
More comfortable at higher frets for big hands
Nut Width
1.693'' (43mm) vs 1.654'' (42mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Tremolo vs Fixed
Simple vibratos without too much maintenance
Scale Length
25.5'' (647.7mm) vs 24.75'' (628.7mm)
Lower action and brighter natural tone
Pickups Power
Passive vs Active
Cleaner sound and no battery needed
Value Score
71 vs 64
Better price/quality relationship

Reasons to Get
ESP Iron Cross over Reverend Crosscut W

Country of Manufacturing
Japan vs South Korea
Built with higher quality standards
Decorative Top
Maple vs None
Finished with beautiful natural wood patterns
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Neck Profile
Thin U vs Medium Oval
Comfortable neck with more grip
Volume Knobs
2 vs 1
More volume control
Neck Thickness at 1st Fret
0.787'' (20mm) vs 0.85'' (21.6mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.866'' (22mm) vs 0.9'' (22.9mm)
More comfortable at higher frets for small hands
Nut Width
1.654'' (42mm) vs 1.693'' (43mm)
Favors small hands, easier bar chords and other shapes
Strap Lock
Yes vs None
Protects your guitar from dropping by locking the strap
Bridge
Fixed vs Tremolo
Good sustain and needs no set-up
Scale Length
24.75'' (628.7mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Pickups Power
Active vs Passive
More output

Other Key Differences
Reverend Crosscut W vs ESP Iron Cross

Bridge Pickup
Cleancut Bridge vs EMG JH James Hetfield
Different Bridge Pickup
Neck Pickup
Cleancut Neck vs EMG JH James Hetfield
Different Neck Pickup
Body Wood
Limba vs Mahogany
Different Body Wood
Neck Wood
Roasted Maple vs Mahogany
Different Neck Wood
Fretboard Wood
Rosewood vs Ebony
Different Fretboard Wood
Headstock
6 vs 3-3
Different Headstock
Nut Material
Boneite vs Bone
Different Nut Material

Shared Features
Reverend Crosscut W vs ESP Iron Cross

Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Pickups
HH
High output without hum
Number of Frets
22
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Fretboard Radius
12'' (304.8mm)
Same fretboard comfortability
Type of Frets
Jumbo vs XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • Locking Tuners
  • High-Quality Nut
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT

ESP Iron Cross Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the ESP Iron Cross is probably the better product overall with its final score of 79 compared to the Reverend Crosscut W's 71 score, although not by a lot.

The ESP Iron Cross wins when it comes to sound, playability, build quality. On the other hand, the Reverend Crosscut W has the upper hand when it comes to value for the money.

If you got small hands, you'll probably feel more comfortable playing the ESP Iron Cross.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the ESP Iron Cross is the better choice.

The ESP Iron Cross meets 6 out of our 8 criteria items for beginner friendliness, while the Reverend Crosscut W meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Reverend Crosscut W
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale

New Player Friendliness

ESP Iron Cross
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Reverend Crosscut W Overview

  • From Reverend's 2021 Bolt-On series
  • Made in South Korea
  • 6 strings
  • 25.5"'' scale
  • 12" Fretboard Radius
  • Korina body
  • Roasted Maple neck
  • Rosewood fretboard
  • Bridge pickup: Cleancut Bridge (Humbucker/Passive)
  • Neck pickup: Cleancut Neck (Humbucker/Passive)
  • 1 volume and 2 tone Dome knobs
  • 3-way Switch
  • Wilkinson WVS50 IIK Tremolo bridge
  • Medium Oval Bolt-On neck
  • 22 Jumbo frets
  • Reverend Pin-Lock tuners
  • Compare Specs >

ESP Iron Cross Overview

  • From ESP's 2014 Signature series
  • James Hetfield Signature
  • Made in Japan
  • 6 strings
  • 24.75"'' scale
  • 12" Fretboard Radius
  • Maple top
  • Mahogany body
  • 1Pc Mahogany neck
  • Ebony fretboard
  • Bridge pickup: EMG JH James Hetfield (Humbucker/Active)
  • Neck pickup: EMG JH James Hetfield (Humbucker/Active)
  • 2 volume and 1 tone Bell knobs
  • 3-way Switch
  • Tonepros Locking TOM & Tailpiece bridge
  • Thin U Set neck
  • 22 XL Jumbo frets
  • Sperzel Locking tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Reverend Crosscut W

Roasted Maple wood pattern used for guitar building
Roasted Maple
Rosewood wood pattern used for guitar building
Rosewood
Limba wood pattern used for guitar building
Limba

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Limba is a relatively rare wood that shows exotic tight dark grain stripes. It comes in white or black. As a tonewood, it is comparable to Mahogany but with richer mids. Find out more about Limba.

Woods Used in the ESP Iron Cross

Mahogany wood pattern used for guitar building
Mahogany
Ebony wood pattern used for guitar building
Ebony

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Winner: Tie.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the ESP Iron Cross has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

We found the same or similar pickups to the ESP Iron Cross's online:

The Reverend Crosscut W's pickups are Passive while the ESP Iron Cross's are Active.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: ESP Iron Cross.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

They both share the following switching options:

Reverend Crosscut W and ESP Iron Cross pickups switch and push knobs diagram
Reverend Crosscut W and ESP Iron Cross's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Reverend Crosscut W.

Final Sound Quality Scores

Reverend Crosscut W
Pickups 90
Sustain 80
Versatility 66
Tuning Stability 75
Sound 78
ESP Iron Cross
Pickups 100
Sustain 90
Versatility 46
Tuning Stability 80
Sound 79

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Reverend Crosscut W compares to the ESP Iron Cross.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Reverend Crosscut W is built in South Korea while the ESP Iron Cross is made in Japan.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.

Winner: ESP Iron Cross

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Reverend Crosscut W has a Boneite nut. This is an artificial material made to imitate the favored type of nut: bone. This allows it to sound and feel pretty much like bone, but without the inconsistency of natural materials.

On the other hand, the ESP Iron Cross comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Reverend Crosscut W's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

On the other hand, the ESP Iron Cross's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Reverend Crosscut W has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

On the other hand, the ESP Iron Cross comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Reverend Crosscut W.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Reverend Crosscut W
  • Locking Tuners
  • Expensive Wood
  • Boneite Nut
  • Top Brand Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • Made in South Korea
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
ESP Iron Cross
  • Locking Tuners
  • Made in Japan
  • Expensive Wood
  • Bone Nut
  • Top Brand Pickups
  • Strap Lock
  • Cheap Fret Wire (NS)
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio

Final Build Quality Scores

Reverend Crosscut W
Quality of materials 56
Features 65
Quality Control 75
Build Quality 65
ESP Iron Cross
Quality of materials 70
Features 65
Quality Control 100
Build Quality 78

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Reverend Crosscut W Nut Width
Reverend Crosscut W Nut Width
ESP Iron Cross Nut Width
ESP Iron Cross Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Reverend Crosscut W has the wider nut with 43mm (1.693'') vs 42mm (1.654''). This is a 1mm (0.039'') difference

This means that it will be more difficult to do bar chords on the Reverend Crosscut W, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Reverend Crosscut W's Scale Length
Reverend Crosscut W's Scale Length
ESP Iron Cross's Scale Length
ESP Iron Cross's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Reverend Crosscut W has the longest scale: 25.5". The ESP Iron Cross is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Reverend Crosscut W Neck Profile
Reverend Crosscut W's neck profile
ESP Iron Cross Neck Profile
ESP Iron Cross's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Reverend Crosscut W has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

The ESP Iron Cross, on the other hand, has a U neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

Fretboard Radius

Reverend Crosscut W Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Reverend Crosscut W and the ESP Iron Cross have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Reverend Crosscut W favors large hands more than the ESP Iron Cross.

Reverend Crosscut W:
Big Hands
Small Hands
ESP Iron Cross:
Big Hands
Small Hands

Fret Size

Reverend Crosscut W Frets Size
Reverend Crosscut W's Frets Size
ESP Iron Cross Frets Size
ESP Iron Cross's Frets Size

The ESP Iron Cross has XL Jumbo frets, which should be taller than the Reverend Crosscut W's Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Reverend Crosscut W
Bending & Vibrato Ease 80
Chord Playability 50
Solo Playability 80
Playability 70
ESP Iron Cross
Bending & Vibrato Ease 95
Chord Playability 75
Solo Playability 70
Playability 80

Specs Side-by-Side

Reverend Crosscut W vs ESP Iron Cross
General Reverend Crosscut W ESP Iron Cross
Brand: Reverend ESP
Year: 2021 2014
Configuration: HH HH
Strings: 6 6
Made in: South Korea Japan
Series: Bolt-On Signature
Colors: Black, Blue, Red Burst Black
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Korina Mahogany
Bridge: Wilkinson WVS50 IIK Tremolo Tonepros Locking TOM & Tailpiece
Neck
Neck Joint: Bolt-On Set
Tuners: Reverend Pin-Lock Sperzel Locking
Fretboard: Rosewood Ebony
Neck Material: Roasted Maple 1Pc Mahogany
Decoration: Dots Flags with Cross on 12th
Scale Size: 25.5" 24.75"
Shape: Medium Oval Thin U
Thickness: 1st Fret: 0.85'' (21.6mm) - 12th Fret: 0.9'' (22.9mm) 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm)
Frets: 22 Jumbo Nickel Silver 22 XL Jumbo Nickel Silver
Fretboard Radius: 12" 12"
Nut: Boneite Bone
Nut Width: 43mm (1.693'') 42mm (1.654'')
Electronics
Bridge Pickup: Cleancut Bridge (Humbucker / Passive) EMG JH James Hetfield (Humbucker / Active)
Middle Pickup:
Neck Pickup: Cleancut Neck (Humbucker / Passive) EMG JH James Hetfield (Humbucker / Active)
Switch: 3 Way 3 Way
Knobs: Dome Bell
Pickup Mods: None None
Volume Controls: 1 2
Tone Controls: 2 1