Swap
Swap
PRS S2 McCarty 594 Singlecut
Ibanez RGDR4327 Prestige
VS
Playability
75
Sound
73
Build
65
Value
66
Score
71
FIND IT ON:
Reverb logoSweetwater logo
Playability
73
Sound
79
Build
73
Value
65
Score
75
FIND IT ON:
Reverb logoSweetwater logoMusician's Friend logo
Add to Compare
Add to Compare
Side to side spec comparison >

PRS S2 McCarty 594 Singlecut vs Ibanez RGDR4327 Prestige

Reasons to Get
PRS S2 McCarty 594 Singlecut over Ibanez RGDR4327 Prestige

Type of Frets
Medium Jumbo vs Jumbo
You'll feel the fretboard when pressing down the strings
Neck Profile
Pattern Vintage vs Wizard-7
Adapts to the natural shape of your hand
Pickup Mods
Coil Split vs None
Splits humbuckers into single coil pickups
Strings
6 vs 7
Narrower neck and fewer strings to change
Volume Knobs
2 vs 1
More volume control
Tone Knobs
2 vs 0
More tone control
Neck Thickness at 1st Fret
0.87'' (22.1mm) vs 0.75'' (19.1mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.97'' (24.6mm) vs 0.83'' (21.1mm)
More comfortable at higher frets for big hands
Nut Width
1.688'' (42.9mm) vs 1.89'' (48mm)
Favors small hands, easier bar chords and other shapes
Bridge
Fixed vs Lo-Pro Edge
Good sustain and needs no set-up
Scale Length
24.6'' (624.8mm) vs 26.5'' (673.1mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
10'' (254mm) vs 17'' (431.8mm)
More curved fretboard helpful to play chords without muting strings
Value Score
66 vs 65
Better price/quality relationship

Reasons to Get
Ibanez RGDR4327 Prestige over PRS S2 McCarty 594 Singlecut

Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
Jumbo vs Medium Jumbo
You won't feel the fretboard when pressing down the strings
Neck Profile
Wizard-7 vs Pattern Vintage
Thin neck for playing fast
Neck Joint
Bolt-On vs Set
Allows you to detach and swap the neck
Strings
7 vs 6
Allows you to play lower notes
Number of Frets
24 vs 22
Allows to reach higher notes
Neck Thickness at 1st Fret
0.75'' (19.1mm) vs 0.87'' (22.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.83'' (21.1mm) vs 0.97'' (24.6mm)
More comfortable at higher frets for small hands
Nut Width
1.89'' (48mm) vs 1.688'' (42.9mm)
Less likely to mute strings by accident and more space for fingerstyle
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Bridge
Lo-Pro Edge vs Fixed
Intense vibratos with more features than a Floyd Rose
Scale Length
26.5'' (673.1mm) vs 24.6'' (624.8mm)
Lower action and brighter natural tone
Fretboard Radius
17'' (431.8mm) vs 10'' (254mm)
Flatter fretboard makes it easier to play single notes and bend

Other Key Differences
PRS S2 McCarty 594 Singlecut vs Ibanez RGDR4327 Prestige

Bridge Pickup
PRS 58/15 S vs DiMarzio Fusion Edge 7
Different Bridge Pickup
Neck Pickup
PRS 58/15 S vs DiMarzio Fusion Edge 7
Different Neck Pickup
Neck Wood
Mahogany vs Maple
Different Neck Wood
Fretboard Wood
Rosewood vs Ebony
Different Fretboard Wood
Headstock
3-3 vs R7
Different Headstock
Nut Material
PRS Propietary vs Locking
Different Nut Material

Shared Features
PRS S2 McCarty 594 Singlecut vs Ibanez RGDR4327 Prestige

Body Wood
Mahogany
Same Body Wood
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Pickups
HH
High output without hum
Paint Finish
Poly
Resistant paint that ages well
Pickups Power
Passive
Cleaner sound and no battery needed
Decorative Top
Maple vs Richlite
Finished with beautiful natural wood patterns

Common Strengths

  • High-Quality Nut
  • From a High-Quality-Standards Country
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

PRS S2 McCarty 594 Singlecut Prices

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Ibanez RGDR4327 Prestige is probably the better product overall with its final score of 75 compared to the PRS S2 McCarty 594 Singlecut's 71 score, although not by a lot.

The Ibanez RGDR4327 Prestige wins when it comes to sound, build quality. On the other hand, the PRS S2 McCarty 594 Singlecut has the upper hand when it comes to playability, value for the money.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the PRS S2 McCarty 594 Singlecut is the better choice.

The PRS S2 McCarty 594 Singlecut meets 4 out of our 8 criteria items for beginner friendliness, while the Ibanez RGDR4327 Prestige meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

PRS S2 McCarty 594 Singlecut
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Short scale
  • Comfortable fretboard
  • Narrow nut
  • Comfortable neck
  • Locking tuners

New Player Friendliness

Ibanez RGDR4327 Prestige
  • Comfortable shape
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

PRS S2 McCarty 594 Singlecut Overview

  • From PRS's 2020 S2 series
  • Made in United States
  • 6 strings
  • 24.6"'' scale
  • 10" Fretboard Radius
  • Maple top
  • Mahogany body
  • Mahogany neck
  • Rosewood w/ Faux Bone Binding fretboard
  • Bridge pickup: PRS 58/15 S (Humbucker/Passive)
  • Neck pickup: PRS 58/15 S (Humbucker/Passive)
  • 2 volume and 2 tone Speed knobs
  • 3-way Switch
  • PRS Two-Piece bridge
  • Pattern Vintage Set neck
  • 22 Medium Jumbo frets
  • Vintage-Style tuners
  • Weight around 8.1lbs (3.7kgs)
  • Compare Specs >

Ibanez RGDR4327 Prestige Overview

  • From Ibanez's 2020 RGD series
  • Made in Japan
  • 7 strings
  • 26.5"'' scale
  • 17" Fretboard Radius
  • Richlite top
  • African Mahogany body
  • Maple/Wenge neck
  • Bound Macassar Ebony fretboard
  • Bridge pickup: DiMarzio Fusion Edge 7 (Humbucker/Passive)
  • Neck pickup: DiMarzio Fusion Edge 7 (Humbucker/Passive)
  • 1 volume and 0 tone Dome knobs
  • 3-way Switch
  • Lo-Pro Edge 7 tremolo bridge
  • Wizard-7 Bolt-On neck
  • 24 Jumbo frets
  • Gotoh machine heads tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Woods Used in the PRS S2 McCarty 594 Singlecut

Rosewood wood pattern used for guitar building
Rosewood

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Woods Used in the Ibanez RGDR4327 Prestige

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Winner: Tie.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the PRS S2 McCarty 594 Singlecut has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: PRS S2 McCarty 594 Singlecut.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Only the PRS S2 McCarty 594 Singlecut comes with some kind of pickup modification: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

PRS S2 McCarty 594 Singlecut pickups switch and push knobs diagram
PRS S2 McCarty 594 Singlecut's switch options
Ibanez RGDR4327 Prestige pickups switch and push knobs diagram
Ibanez RGDR4327 Prestige's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Ibanez RGDR4327 Prestige.

Final Sound Quality Scores

PRS S2 McCarty 594 Singlecut
Pickups 90
Sustain 70
Versatility 63
Tuning Stability 70
Sound 73
Ibanez RGDR4327 Prestige
Pickups 85
Sustain 80
Versatility 67
Tuning Stability 85
Sound 79

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the PRS S2 McCarty 594 Singlecut compares to the Ibanez RGDR4327 Prestige.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The PRS S2 McCarty 594 Singlecut is built in United States while the Ibanez RGDR4327 Prestige is made in Japan.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The PRS S2 McCarty 594 Singlecut has a PRS Propietary nut. It's similar to TUSQ nuts, but they're not as hard, and the tone is not as bright. However, the material is self-lubricating, and it's usually well cut, so they have good tuning stability.

On the other hand, the Ibanez RGDR4327 Prestige comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The PRS S2 McCarty 594 Singlecut's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

On the other hand, the Ibanez RGDR4327 Prestige's is a Lo-Pro Edge. Similar to the original Edge bridge design by Ibanez, but with a lower profile (more discrete and less likely to interfere with your picking). It comes with the same improvements over Floyd Rose tremolos as the Edge: push-in arm, replaceable knife edges, more sustain, smaller saddles, and more. These bridges offer tons of versatility, but they also require more work than simpler tremolos to set up.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Ibanez RGDR4327 Prestige.

Tuners

Both come with regular tuners. The PRS S2 McCarty 594 Singlecut's are Vintage-Style while the Ibanez RGDR4327 Prestige's are Gotoh machine heads

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The PRS S2 McCarty 594 Singlecut has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

On the other hand, the Ibanez RGDR4327 Prestige comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Ibanez RGDR4327 Prestige.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
PRS S2 McCarty 594 Singlecut
  • Made in United States
  • Expensive Wood
  • PRS Propietary Nut
  • Top Brand Pickups
  • Coil Split Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Ibanez RGDR4327 Prestige
  • Made in Japan
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Luminescent Inlay
  • Tremolo
  • Retainer Bar
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

PRS S2 McCarty 594 Singlecut
Quality of materials 50
Features 55
Quality Control 90
Build Quality 65
Ibanez RGDR4327 Prestige
Quality of materials 55
Features 70
Quality Control 95
Build Quality 73

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

PRS S2 McCarty 594 Singlecut Nut Width
PRS S2 McCarty 594 Singlecut Nut Width
Ibanez RGDR4327 Prestige Nut Width
Ibanez RGDR4327 Prestige Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Ibanez RGDR4327 Prestige has the wider nut with 48mm (1.89'') vs 42.9mm (1.688''). This is a 5.1mm (0.202'') difference

This means that it will be more difficult to do bar chords on the Ibanez RGDR4327 Prestige, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

PRS S2 McCarty 594 Singlecut's Scale Length
PRS S2 McCarty 594 Singlecut's Scale Length
Ibanez RGDR4327 Prestige's Scale Length
Ibanez RGDR4327 Prestige's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Ibanez RGDR4327 Prestige has the longest scale: 26.5". The PRS S2 McCarty 594 Singlecut is only 24.6" long. This is a 1.9'' (48.3mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

PRS S2 McCarty 594 Singlecut Neck Profile
PRS S2 McCarty 594 Singlecut's neck profile
Ibanez RGDR4327 Prestige Neck Profile
Ibanez RGDR4327 Prestige's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The PRS S2 McCarty 594 Singlecut has a Asymmetrical type of neck. Even though this neck shape looks like a poorly-made job, it's, in fact, the neck that most naturally adapts to the arc of your hand when grabbing a guitar neck. You'll notice that the lower part of your palm makes a more pronounced, deeper curve while the upper part makes a more subtle arch. This is the shape that adapts the best to that natural arch your hand makes while playing.

The Ibanez RGDR4327 Prestige, on the other hand, has a Wizard neck. This is thinner than most C-type necks. It won't get in your way if you want to play fast solos. It's not as slim as 'Super Wizard' necks, so it might fit you better if you don't like ultra-thin necks.

Fretboard Radius

PRS S2 McCarty 594 Singlecut Fingerboard Radius
PRS S2 McCarty 594 Singlecut's Fingerboard radius
Ibanez RGDR4327 Prestige Fingerboard Radius
Ibanez RGDR4327 Prestige's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the PRS S2 McCarty 594 Singlecut's fingerboard radius is smaller, which means it's more curved than the Ibanez RGDR4327 Prestige's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Ibanez RGDR4327 Prestige.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison are balanced for most hand sizes.

PRS S2 McCarty 594 Singlecut:
Big Hands
Small Hands
Ibanez RGDR4327 Prestige:
Big Hands
Small Hands

Fret Size

PRS S2 McCarty 594 Singlecut Frets Size
PRS S2 McCarty 594 Singlecut's Frets Size
Ibanez RGDR4327 Prestige Frets Size
Ibanez RGDR4327 Prestige's Frets Size

The Ibanez RGDR4327 Prestige has Jumbo frets, which should be taller than the PRS S2 McCarty 594 Singlecut's Medium Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

PRS S2 McCarty 594 Singlecut
Bending & Vibrato Ease 85
Chord Playability 85
Solo Playability 55
Playability 75
Ibanez RGDR4327 Prestige
Bending & Vibrato Ease 80
Chord Playability 50
Solo Playability 90
Playability 73

Specs Side-by-Side

PRS S2 McCarty 594 Singlecut vs Ibanez RGDR4327 Prestige
General PRS S2 McCarty 594 Singlecut Ibanez RGDR4327 Prestige
Brand: PRS Ibanez
Year: 2020 2020
Configuration: HH HH
Strings: 6 7
Made in: United States Japan
Series: S2 RGD
Colors: Blue, Green, Gray, Red Burst, Dark Cherry Sunburst, McCarty Sunburst Natural Black
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Mahogany African Mahogany
Bridge: PRS Two-Piece Lo-Pro Edge 7 tremolo
Neck
Neck Joint: Set Bolt-On
Tuners: Vintage-Style Gotoh machine heads
Fretboard: Rosewood w/ Faux Bone Binding Bound Macassar Ebony
Neck Material: Mahogany Maple/Wenge
Decoration: Birds Off-set Lum
Scale Size: 24.6" 26.5"
Shape: Pattern Vintage Wizard-7
Thickness: 1st Fret: 0.87'' (22.1mm) - 12th Fret: 0.97'' (24.6mm) 1st Fret: 0.75'' (19.1mm) - 12th Fret: 0.83'' (21.1mm)
Frets: 22 Medium Jumbo Nickel Silver 24 Jumbo Nickel Silver
Fretboard Radius: 10" 17"
Nut: PRS Propietary Locking
Nut Width: 42.9mm (1.688'') 48mm (1.89'')
Electronics
Bridge Pickup: PRS 58/15 S (Humbucker / Passive) DiMarzio Fusion Edge 7 (Humbucker / Passive)
Middle Pickup:
Neck Pickup: PRS 58/15 S (Humbucker / Passive) DiMarzio Fusion Edge 7 (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Speed Dome
Pickup Mods: Coil Split None
Volume Controls: 2 1
Tone Controls: 2 0