Swap
Swap
Jackson X Series Soloist SL3X DX Crackle
ESP LTD PS-1
VS
Playability
77
Sound
73
Build
60
Value
75
Score
70
FIND IT ON:
Reverb logoAmazon logoSweetwater logoMusician's Friend logo
Playability
80
Sound
68
Build
57
Value
78
Score
68
FIND IT ON:
Reverb logoAmazon logoSweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

Jackson X Series Soloist SL3X DX Crackle vs LTD PS-1

Reasons to Get
Jackson X Series Soloist SL3X DX Crackle over LTD PS-1

Compound Radius
12" to 16" vs 13.78"
Balanced playability for chords and single-notes
Neck Profile
Jackson Standard vs Thin U
Thin and flat neck for playing fast
Nut Material
Locking vs Plastic
Best tuning stability for intense tremolo usage
Neck Joint
Neck-Through vs Bolt-On
Stronger neck and easier access to upper frets
Body Type
Solid Body vs Semi-Hollow
Feedback free
Switch Positions
5 vs 3
More tone options
Pickups
HSS vs HH
High output with beautiful cleans and tone versatility
Number of Frets
24 vs 22
Allows to reach higher notes
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.787'' (20mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.85'' (21.6mm) vs 0.866'' (22mm)
More comfortable at higher frets for small hands
Nut Width
1.688'' (42.9mm) vs 1.654'' (42mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Floyd Rose vs Fixed
Allows intense vibratos and techniques like Dive Bombs
Scale Length
25.5'' (647.7mm) vs 24.75'' (628.7mm)
Lower action and brighter natural tone

Reasons to Get
ESP LTD PS-1 over Jackson X Series Soloist SL3X DX Crackle

Country of Manufacturing
Indonesia vs China
Built with higher quality standards
Release Year
2021 vs 2020
From a more recent year
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Neck Profile
Thin U vs Jackson Standard
Comfortable neck with more grip
Pickup Mods
Coil Split vs None
Splits humbuckers into single coil pickups
Body Type
Semi-Hollow vs Solid Body
Lighter and allows more gain than a hollowbody
Volume Knobs
2 vs 1
More volume control
Tone Knobs
2 vs 1
More tone control
Pickups
HH vs HSS
High output without hum
Neck Thickness at 1st Fret
0.787'' (20mm) vs 0.79'' (20.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.866'' (22mm) vs 0.85'' (21.6mm)
More comfortable at higher frets for big hands
Nut Width
1.654'' (42mm) vs 1.688'' (42.9mm)
Favors small hands, easier bar chords and other shapes
Bridge
Fixed vs Floyd Rose
Good sustain and needs no set-up
Scale Length
24.75'' (628.7mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Value Score
78 vs 75
Better price/quality relationship

Other Key Differences
Jackson X Series Soloist SL3X DX Crackle vs LTD PS-1

Bridge Pickup
Jackson High-Output Humbucking vs ESP Designed LH-150B
Different Bridge Pickup
Neck Pickup
Jackson High-Output Mini Rail Humbucking vs ESP Designed LH-150N
Different Neck Pickup
Body Wood
Basswood vs Mahogany
Different Body Wood
Fretboard Wood
Laurel vs Jatoba
Different Fretboard Wood
Headstock
6 vs 3-3
Different Headstock
Nut Material
Locking vs Plastic
Different Nut Material

Shared Features
Jackson X Series Soloist SL3X DX Crackle vs LTD PS-1

Neck Wood
Maple
Same Neck Wood
Strings
6
Same playing style
Paint Finish
Poly
Resistant paint that ages well
Pickups Power
Passive
Cleaner sound and no battery needed
Type of Frets
Jumbo vs XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Weaknesses

  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • Top Pickup Brand
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better for Beginners?

The ESP LTD PS-1 meets 5 out of our 8 criteria items for beginner friendliness, while the Jackson X Series Soloist SL3X DX Crackle meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Jackson X Series Soloist SL3X DX Crackle
  • Comfortable shape
  • Comfortable fretboard
  • Tall frets
  • Comfortable neck
  • Narrow nut
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

New Player Friendliness

ESP LTD PS-1
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Woods Used in the Jackson X Series Soloist SL3X DX Crackle

Laurel wood pattern used for guitar building
Laurel
Basswood wood pattern used for guitar building
Basswood

There are many types of Laurel, but East Indian is the most common for guitar building. Its color can vary from dark to light brown with black lines. Many people find its tonality similar to Rosewood, which favors the warmer frequencies. Find out more about Laurel.

Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

Woods Used in the ESP LTD PS-1

Jatoba wood pattern used for guitar building
Jatoba
Mahogany wood pattern used for guitar building
Mahogany

Jatoba is a hard and dense wood that emphasizes the mid-lows, giving a fuller, more round sound than, for example, Mahogany. However, it also has a lot of clarity in the top end. Find out more about Jatoba.

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Winner: ESP LTD PS-1.

Pickup Configuration

The Jackson X Series Soloist SL3X DX Crackle has an HSS configuration while the ESP LTD PS-1 has HH pickups.

HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The ESP LTD PS-1 pickups from a more specialized brand than the Jackson X Series Soloist SL3X DX Crackle. Its pickups should give you a fuller, richer sound, although it all depends on what type of music you're going to play. We recommend these pickups for Jazz and similar genres.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: ESP LTD PS-1.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Jackson X Series Soloist SL3X DX Crackle gives you 5 switch options while the ESP LTD PS-1 gives you 3. This means that the Jackson X Series Soloist SL3X DX Crackle gives you more options to find the right pickup combination for the type of sound you want to achieve

Only the ESP LTD PS-1 comes with some kind of pickup modification: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

Jackson X Series Soloist SL3X DX Crackle pickups switch selector and push knobs diagram
Jackson X Series Soloist SL3X DX Crackle's switch options
ESP LTD PS-1 pickups switch and push knobs diagram
ESP LTD PS-1's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Jackson X Series Soloist SL3X DX Crackle.

Final Sound Quality Scores

Jackson X Series Soloist SL3X DX Crackle
Pickups 55
Sustain 80
Versatility 70
Tuning Stability 85
Sound 73
ESP LTD PS-1
Pickups 60
Sustain 80
Versatility 68
Tuning Stability 65
Sound 68

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Jackson X Series Soloist SL3X DX Crackle compares to the ESP LTD PS-1.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Jackson X Series Soloist SL3X DX Crackle is built in China while the ESP LTD PS-1 is made in Indonesia.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: ESP LTD PS-1

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Jackson X Series Soloist SL3X DX Crackle has a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

On the other hand, the ESP LTD PS-1 comes with a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Winner: Jackson X Series Soloist SL3X DX Crackle.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Jackson X Series Soloist SL3X DX Crackle's brige is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

On the other hand, the ESP LTD PS-1's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Jackson X Series Soloist SL3X DX Crackle.

Tuners

Both come with regular tuners. The Jackson X Series Soloist SL3X DX Crackle's are Jackson Sealed Die-Cast while the ESP LTD PS-1's are LTD

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Jackson X Series Soloist SL3X DX Crackle has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

On the other hand, the ESP LTD PS-1 comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Jackson X Series Soloist SL3X DX Crackle.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Jackson X Series Soloist SL3X DX Crackle
  • Locking Nut
  • Neck-Through Build
  • Tremolo
  • Compound Radius Fretboard
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No Expensive Woods
  • No Top Brand Pickups
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No 21:1 Tuner Ratio
  • No Retainer Bar
  • No Strap Lock
Strengths & Weaknesses
ESP LTD PS-1
  • Expensive Wood
  • Coil Split Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Jackson X Series Soloist SL3X DX Crackle
Quality of materials 41
Features 80
Quality Control 60
Build Quality 60
ESP LTD PS-1
Quality of materials 46
Features 60
Quality Control 65
Build Quality 57

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Jackson X Series Soloist SL3X DX Crackle Nut Width
Jackson X Series Soloist SL3X DX Crackle Nut Width
ESP LTD PS-1 Nut Width
ESP LTD PS-1 Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Jackson X Series Soloist SL3X DX Crackle has the wider nut with 42.9mm (1.688'') vs 42mm (1.654''). This is a 0.9mm (0.034'') difference

This means that it will be more difficult to do bar chords on the Jackson X Series Soloist SL3X DX Crackle, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Jackson X Series Soloist SL3X DX Crackle's Scale Length
Jackson X Series Soloist SL3X DX Crackle's Scale Length
ESP LTD PS-1's Scale Length
ESP LTD PS-1's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Jackson X Series Soloist SL3X DX Crackle has the longest scale: 25.5". The ESP LTD PS-1 is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Jackson X Series Soloist SL3X DX Crackle Neck Profile
Jackson X Series Soloist SL3X DX Crackle's neck profile
ESP LTD PS-1 Neck Profile
ESP LTD PS-1's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Jackson X Series Soloist SL3X DX Crackle has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.

The ESP LTD PS-1, on the other hand, has a U neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

Fretboard Radius

Jackson X Series Soloist SL3X DX Crackle Fretboard Compound Radius
Jackson X Series Soloist SL3X DX Crackle's Compound Fretboard Radius
ESP LTD PS-1 Fingerboard Radius
ESP LTD PS-1's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Jackson X Series Soloist SL3X DX Crackle is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Jackson X Series Soloist SL3X DX Crackle:
Big Hands
Small Hands
ESP LTD PS-1:
Big Hands
Small Hands

Fret Size

Jackson X Series Soloist SL3X DX Crackle Frets Size
Jackson X Series Soloist SL3X DX Crackle's Frets Size
ESP LTD PS-1 Frets Size
ESP LTD PS-1's Frets Size

The ESP LTD PS-1 has XL Jumbo frets, which should be taller than the Jackson X Series Soloist SL3X DX Crackle's Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Jackson X Series Soloist SL3X DX Crackle
Bending & Vibrato Ease 70
Chord Playability 60
Solo Playability 100
Playability 77
ESP LTD PS-1
Bending & Vibrato Ease 95
Chord Playability 75
Solo Playability 70
Playability 80

Specs Side-by-Side

Jackson X Series Soloist SL3X DX Crackle vs LTD PS-1
General Jackson X Series Soloist SL3X DX Crackle LTD PS-1
Brand: Jackson ESP LTD
Year: 2020 2021
Configuration: HSS HH
Strings: 6 6
Made in: China Indonesia
Series: X Xtone
Colors: Gold, Gray White, Pink
Left-Handed Version: No No
Body
Type: Solid Body Semi-Hollow
Body Material: Basswood Mahogany
Bridge: Floyd Rose Special Double-Locking Tremolo (Recessed) TOM & Tailpiece
Neck
Neck Joint: Neck-Through Bolt-On
Tuners: Jackson Sealed Die-Cast LTD
Fretboard: Laurel Roasted Jatoba
Neck Material: Maple Maple
Decoration: Pearloid Sharkfin Blocks
Scale Size: 25.5" 24.75"
Shape: Jackson Standard Thin U
Thickness: 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.85'' (21.6mm) 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm)
Frets: 24 Jumbo Nickel Silver 22 XL Jumbo Nickel Silver
Fretboard Radius: 12" to 16" 13.78"
Nut: Locking Plastic
Nut Width: 42.9mm (1.688'') 42mm (1.654'')
Electronics
Bridge Pickup: Jackson High-Output Humbucking (Humbucker / Passive) ESP Designed LH-150B (Humbucker / Passive)
Middle Pickup: Jackson High-Output Mini Rail Humbucking (Single Coil / Passive)
Neck Pickup: Jackson High-Output Mini Rail Humbucking (Single Coil / Passive) ESP Designed LH-150N (Humbucker / Passive)
Switch: 5 Way 3 Way
Knobs: Dome Speed
Pickup Mods: None Coil Split
Volume Controls: 1 2
Tone Controls: 1 2