Swap
Swap
Jackson USA Signature Adrian Smith San Dimas SDQM
Schecter Kenny Hickey Solo-6 EX S
VS
Playability
70
Sound
81
Build
73
Value
60
Score
75
FIND IT ON:
Sweetwater logoReverb logo
Playability
78
Sound
82
Build
65
Value
70
Score
75
FIND IT ON:
Reverb logoSweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

Jackson USA Signature Adrian Smith San Dimas SDQM vs Schecter Kenny Hickey Solo-6 EX S

Reasons to Get
Jackson USA Signature Adrian Smith San Dimas SDQM over Schecter Kenny Hickey Solo-6 EX S

Country of Manufacturing
United States vs South Korea
Built with higher quality standards
Decorative Top
Flame Maple vs None
Finished with beautiful natural wood patterns
Compound Radius
12" to 16" vs 14"
Balanced playability for chords and single-notes
Neck Profile
Jackson Thin D vs Thin C
Thin and flat neck for playing fast
Neck Joint
Bolt-On vs Set
Allows you to detach and swap the neck
Switch Positions
5 vs 3
More tone options
Pickups
HSS vs HH
High output with beautiful cleans and tone versatility
Neck Thickness at 1st Fret
0.75'' (19.1mm) vs 0.79'' (20.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.83'' (21.1mm) vs 0.87'' (22.1mm)
More comfortable at higher frets for small hands
Nut Width
1.688'' (42.9mm) vs 1.654'' (42mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Floyd Rose vs Fixed
Allows intense vibratos and techniques like Dive Bombs
Scale Length
25.5'' (647.7mm) vs 26.5'' (673.1mm)
Easier bending, shorter fret separation and warmer natural tone

Reasons to Get
Schecter Kenny Hickey Solo-6 EX S over Jackson USA Signature Adrian Smith San Dimas SDQM

Release Year
2022 vs 2020
From a more recent year
Neck Profile
Thin C vs Jackson Thin D
Comfortable neck that works for most people
Pickup Mods
Multiple vs None
Pickups
HH vs HSS
High output without hum
Number of Frets
24 vs 22
Allows to reach higher notes
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.75'' (19.1mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.87'' (22.1mm) vs 0.83'' (21.1mm)
More comfortable at higher frets for big hands
Nut Width
1.654'' (42mm) vs 1.688'' (42.9mm)
Favors small hands, easier bar chords and other shapes
Bridge
Fixed vs Floyd Rose
Good sustain and needs no set-up
Scale Length
26.5'' (673.1mm) vs 25.5'' (647.7mm)
Lower action and brighter natural tone
Value Score
70 vs 60
Better price/quality relationship

Other Key Differences
Jackson USA Signature Adrian Smith San Dimas SDQM vs Schecter Kenny Hickey Solo-6 EX S

Neck Pickup
Samarium Cobalt Noiseless (SCN) Single-Coil Strat vs Sustainiac
Different Neck Pickup
Body Wood
Alder vs Mahogany
Different Body Wood
Neck Wood
Maple vs Mahogany
Different Neck Wood
Fretboard Wood
Maple vs Rosewood
Different Fretboard Wood
Headstock
6 vs 3-3
Different Headstock
Nut Material
Locking vs Black Tusq XL
Different Nut Material

Shared Features
Jackson USA Signature Adrian Smith San Dimas SDQM vs Schecter Kenny Hickey Solo-6 EX S

Bridge Pickup
Seymour Duncan JB TB-4
Same Bridge Pickup
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Paint Finish
Poly
Resistant paint that ages well
Pickups Power
Passive
Cleaner sound and no battery needed
Type of Frets
Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Nut
  • Top Pickup Brand

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

Jackson USA Signature Adrian Smith San Dimas SDQM Prices

SET PRICE ALERT

Schecter Kenny Hickey Solo-6 EX S Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that both instruments scored 75 out of 100, which makes them similar in terms of quality.

The Schecter Kenny Hickey Solo-6 EX S wins when it comes to sound, playability, value for the money. On the other hand, the Jackson USA Signature Adrian Smith San Dimas SDQM has the upper hand when it comes to build quality.

If you got small hands, you'll probably feel more comfortable playing the Schecter Kenny Hickey Solo-6 EX S.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Schecter Kenny Hickey Solo-6 EX S is the better choice.

The Schecter Kenny Hickey Solo-6 EX S meets 6 out of our 8 criteria items for beginner friendliness, while the Jackson USA Signature Adrian Smith San Dimas SDQM meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Jackson USA Signature Adrian Smith San Dimas SDQM
  • Comfortable shape
  • Comfortable fretboard
  • Tall frets
  • Comfortable neck
  • Narrow nut
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

New Player Friendliness

Schecter Kenny Hickey Solo-6 EX S
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Jackson USA Signature Adrian Smith San Dimas SDQM Overview

  • From Jackson's 2020 Artist Signature series
  • Adrian Smith Signature
  • Made in United States
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Flame Maple top
  • Alder body
  • Quartersawn Maple neck
  • Maple fretboard
  • Bridge pickup: Seymour Duncan JB TB-4 (Humbucker/Passive)
  • Middle pickup: Samarium Cobalt Noiseless (SCN) Single-Coil Strat (Single Coil/Passive)
  • Neck pickup: Samarium Cobalt Noiseless (SCN) Single-Coil Strat (Single Coil/Passive)
  • 1 volume and 1 tone Dome knobs
  • 5-way Switch
  • Floyd Rose Original Double-Locking Tremolo bridge
  • Jackson Thin D Bolt-On neck
  • 22 Jumbo frets
  • Jackson Sealed Die-Cast tuners
  • Weight between 8.25lbs (3.7kgs) and 8.35lbs (3.8kgs)
  • Compare Specs >

Schecter Kenny Hickey Solo-6 EX S Overview

  • From Schecter's 2022 Artist series
  • Kenny Hickey Signature
  • Made in South Korea
  • 6 strings
  • 26.5"'' scale
  • 14" Fretboard Radius
  • Mahogany body
  • Mahogany 3-pc w/ Carbon Fiber Reinforcement Rods neck
  • Rosewood fretboard
  • Bridge pickup: Seymour Duncan JB TB-4 (Humbucker/Passive)
  • Neck pickup: Sustainiac (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • TonePros T3BT TOM & T1Z Tailpiece bridge
  • Thin C Set neck
  • 24 Jumbo frets
  • Schecter Locking tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Jackson USA Signature Adrian Smith San Dimas SDQM

Maple wood pattern used for guitar building
Maple
Alder wood pattern used for guitar building
Alder

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Woods Used in the Schecter Kenny Hickey Solo-6 EX S

Mahogany wood pattern used for guitar building
Mahogany
Rosewood wood pattern used for guitar building
Rosewood

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Winner: Schecter Kenny Hickey Solo-6 EX S.

Pickup Configuration

The Jackson USA Signature Adrian Smith San Dimas SDQM has an HSS configuration while the Schecter Kenny Hickey Solo-6 EX S has HH pickups.

HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the Jackson USA Signature Adrian Smith San Dimas SDQM has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

You can purchase similar pickups to the Jackson USA Signature Adrian Smith San Dimas SDQM's and use them on any guitar:

We found the same or similar pickups to the Schecter Kenny Hickey Solo-6 EX S's online:

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Jackson USA Signature Adrian Smith San Dimas SDQM.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Jackson USA Signature Adrian Smith San Dimas SDQM gives you 5 switch options while the Schecter Kenny Hickey Solo-6 EX S gives you 3. This means that the Jackson USA Signature Adrian Smith San Dimas SDQM gives you more options to find the right pickup combination for the type of sound you want to achieve

Only the Schecter Kenny Hickey Solo-6 EX S comes with some kind of pickup modification: Killswitch, Sustainer.

A Killswitch lets you disengage the pickups instantly. It can be useful when playing live, and it allows you to create some cool sound effects by using the switch rapidly.

The pickups with Sustainer are able to recreate the 'feedback' you get when you hold your guitar near a speaker without muting the strings. This allows them to produce infinite sustain that you can use for as long as you want to create interest sounds and harmonics.

Jackson USA Signature Adrian Smith San Dimas SDQM pickups switch selector and push knobs diagram
Jackson USA Signature Adrian Smith San Dimas SDQM's switch options
Schecter Kenny Hickey Solo-6 EX S pickups switch and push knobs diagram
Schecter Kenny Hickey Solo-6 EX S's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Jackson USA Signature Adrian Smith San Dimas SDQM.

Final Sound Quality Scores

Jackson USA Signature Adrian Smith San Dimas SDQM
Pickups 90
Sustain 80
Versatility 70
Tuning Stability 85
Sound 81
Schecter Kenny Hickey Solo-6 EX S
Pickups 85
Sustain 100
Versatility 64
Tuning Stability 80
Sound 82

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Jackson USA Signature Adrian Smith San Dimas SDQM compares to the Schecter Kenny Hickey Solo-6 EX S.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Jackson USA Signature Adrian Smith San Dimas SDQM is built in United States while the Schecter Kenny Hickey Solo-6 EX S is made in South Korea.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Winner: Jackson USA Signature Adrian Smith San Dimas SDQM

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Jackson USA Signature Adrian Smith San Dimas SDQM has a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

On the other hand, the Schecter Kenny Hickey Solo-6 EX S comes with a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Jackson USA Signature Adrian Smith San Dimas SDQM's brige is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

On the other hand, the Schecter Kenny Hickey Solo-6 EX S's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Jackson USA Signature Adrian Smith San Dimas SDQM.

Tuners

The Schecter Kenny Hickey Solo-6 EX S has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Nevertheless, the Jackson USA Signature Adrian Smith San Dimas SDQM has a locking nut, so it should have even better tune stability and doesn't need locking tuners.

Winner: Schecter Kenny Hickey Solo-6 EX S.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Jackson USA Signature Adrian Smith San Dimas SDQM has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

On the other hand, the Schecter Kenny Hickey Solo-6 EX S comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Jackson USA Signature Adrian Smith San Dimas SDQM.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Jackson USA Signature Adrian Smith San Dimas SDQM
  • Made in United States
  • Locking Nut
  • Top Brand Pickups
  • Tremolo
  • Compound Radius Fretboard
  • Retainer Bar
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Expensive Woods
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter Kenny Hickey Solo-6 EX S
  • Locking Tuners
  • Expensive Wood
  • Black Tusq XL Nut
  • Top Brand Pickups
  • Killswitch, Sustainer Pickups
  • Cheap Fret Wire (NS)
  • Made in South Korea
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Jackson USA Signature Adrian Smith San Dimas SDQM
Quality of materials 45
Features 75
Quality Control 100
Build Quality 73
Schecter Kenny Hickey Solo-6 EX S
Quality of materials 51
Features 65
Quality Control 80
Build Quality 65

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Jackson USA Signature Adrian Smith San Dimas SDQM Nut Width
Jackson USA Signature Adrian Smith San Dimas SDQM Nut Width
Schecter Kenny Hickey Solo-6 EX S Nut Width
Schecter Kenny Hickey Solo-6 EX S Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Jackson USA Signature Adrian Smith San Dimas SDQM has the wider nut with 42.9mm (1.688'') vs 42mm (1.654''). This is a 0.9mm (0.034'') difference

This means that it will be more difficult to do bar chords on the Jackson USA Signature Adrian Smith San Dimas SDQM, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Jackson USA Signature Adrian Smith San Dimas SDQM's Scale Length
Jackson USA Signature Adrian Smith San Dimas SDQM's Scale Length
Schecter Kenny Hickey Solo-6 EX S's Scale Length
Schecter Kenny Hickey Solo-6 EX S's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Schecter Kenny Hickey Solo-6 EX S has the longest scale: 26.5". The Jackson USA Signature Adrian Smith San Dimas SDQM is only 25.5" long. This is a 1'' (25.4mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Jackson USA Signature Adrian Smith San Dimas SDQM Neck Profile
Jackson USA Signature Adrian Smith San Dimas SDQM's neck profile
Schecter Kenny Hickey Solo-6 EX S Neck Profile
Schecter Kenny Hickey Solo-6 EX S's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Jackson USA Signature Adrian Smith San Dimas SDQM has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.

The Schecter Kenny Hickey Solo-6 EX S, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Jackson USA Signature Adrian Smith San Dimas SDQM Fretboard Compound Radius
Jackson USA Signature Adrian Smith San Dimas SDQM's Compound Fretboard Radius
Schecter Kenny Hickey Solo-6 EX S Fingerboard Radius
Schecter Kenny Hickey Solo-6 EX S's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Jackson USA Signature Adrian Smith San Dimas SDQM is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Jackson USA Signature Adrian Smith San Dimas SDQM favors large hands more than the Schecter Kenny Hickey Solo-6 EX S. But it's still more comfortable for people with small hands, as you can see in the score meter below.

Jackson USA Signature Adrian Smith San Dimas SDQM:
Big Hands
Small Hands
Schecter Kenny Hickey Solo-6 EX S:
Big Hands
Small Hands

Fret Size

Jackson USA Signature Adrian Smith San Dimas SDQM and Schecter Kenny Hickey Solo-6 EX S Frets Size
Both have a similar Jumbo fret size

Both have a Jumbo fret size. This is one of the tallest frets you can get. You won't feel the fretboard when pressing down the strings. It will give you the best sustain and all types of chords will be easier to play. However, you can end up changing the pitch of your notes if you press too hard, which is something people used to feeling the fretboard do when trying Jumbo frets for the first time.

Final Playability Scores

Jackson USA Signature Adrian Smith San Dimas SDQM
Bending & Vibrato Ease 70
Chord Playability 60
Solo Playability 80
Playability 70
Schecter Kenny Hickey Solo-6 EX S
Bending & Vibrato Ease 85
Chord Playability 60
Solo Playability 90
Playability 78

Specs Side-by-Side

Jackson USA Signature Adrian Smith San Dimas SDQM vs Schecter Kenny Hickey Solo-6 EX S
General Jackson USA Signature Adrian Smith San Dimas SDQM Schecter Kenny Hickey Solo-6 EX S
Brand: Jackson Schecter
Year: 2020 2022
Configuration: HSS HH
Strings: 6 6
Made in: United States South Korea
Series: Artist Signature Artist
Colors: Green Burst Green
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Alder Mahogany
Bridge: Floyd Rose Original Double-Locking Tremolo TonePros T3BT TOM & T1Z Tailpiece
Neck
Neck Joint: Bolt-On Set
Tuners: Jackson Sealed Die-Cast Schecter Locking
Fretboard: Maple Rosewood
Neck Material: Quartersawn Maple Mahogany 3-pc w/ Carbon Fiber Reinforcement Rods
Decoration: Black Dot Green Blocks
Scale Size: 25.5" 26.5"
Shape: Jackson Thin D Thin C
Thickness: 1st Fret: 0.75'' (19.1mm) - 12th Fret: 0.83'' (21.1mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 22 Jumbo Nickel Silver 24 Jumbo Nickel Silver
Fretboard Radius: 12" to 16" 14"
Nut: Locking Black Tusq XL
Nut Width: 42.9mm (1.688'') 42mm (1.654'')
Electronics
Bridge Pickup: Seymour Duncan JB TB-4 (Humbucker / Passive) Seymour Duncan JB TB-4 (Humbucker / Passive)
Middle Pickup: Samarium Cobalt Noiseless (SCN) Single-Coil Strat (Single Coil / Passive)
Neck Pickup: Samarium Cobalt Noiseless (SCN) Single-Coil Strat (Single Coil / Passive) Sustainiac (Humbucker / Passive)
Switch: 5 Way 3 Way
Knobs: Dome Dome
Pickup Mods: None Killswitch, Sustainer
Volume Controls: 1 1
Tone Controls: 1 1