Swap
Swap
Jackson Pro Series Signature Marty Friedman MF-1
Ibanez JS1CR
VS
Playability
77
Sound
75
Build
57
Value
70
Score
70
FIND IT ON:
Sweetwater logoReverb logoAmazon logoMusician's Friend logo
Playability
68
Sound
86
Build
74
Value
61
Score
76
FIND IT ON:
Reverb logoSweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

Jackson Pro Series Signature Marty Friedman MF-1 vs Ibanez JS1CR

Reasons to Get
Jackson Pro Series Signature Marty Friedman MF-1 over Ibanez JS1CR

Decorative Top
Cracked Mirror vs None
Finished with beautiful natural wood patterns
Release Year
2021 vs 2019
From a more recent year
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
Jumbo vs Medium
You won't feel the fretboard when pressing down the strings
Neck Profile
Speed vs JS
Thin and flat neck for playing fast
Volume Knobs
2 vs 1
More volume control
Tone Knobs
2 vs 1
More tone control
Pickups
HH vs HS
High output without hum
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.775'' (19.7mm) vs 0.79'' (20.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.835'' (21.2mm) vs 0.88'' (22.4mm)
More comfortable at higher frets for small hands
Nut Width
1.688'' (42.9mm) vs 1.693'' (43mm)
Favors small hands, easier bar chords and other shapes
Bridge
Fixed vs Edge
Good sustain and needs no set-up
Scale Length
24.75'' (628.7mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
12'' (304.8mm) vs 10'' (254mm)
Flatter fretboard makes it easier to play single notes and bend
Value Score
70 vs 61
Better price/quality relationship

Reasons to Get
Ibanez JS1CR over Jackson Pro Series Signature Marty Friedman MF-1

Country of Manufacturing
Japan vs China
Built with higher quality standards
Type of Frets
Medium vs Jumbo
You'll feel the fretboard when pressing down the strings
Neck Profile
JS vs Speed
Comfortable neck that works for most people
Nut Material
Locking vs Plastic
Best tuning stability for intense tremolo usage
Pickup Mods
Sustainer vs None
Infinite sustain when activated
Neck Joint
Bolt-On vs Set
Allows you to detach and swap the neck
Pickups
HS vs HH
High output with bright neck cleans
Number of Frets
24 vs 22
Allows to reach higher notes
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.775'' (19.7mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.88'' (22.4mm) vs 0.835'' (21.2mm)
More comfortable at higher frets for big hands
Nut Width
1.693'' (43mm) vs 1.688'' (42.9mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Edge vs Fixed
Intense vibratos with more features than a Floyd Rose
Scale Length
25.5'' (647.7mm) vs 24.75'' (628.7mm)
Lower action and brighter natural tone
Fretboard Radius
10'' (254mm) vs 12'' (304.8mm)
More curved fretboard helpful to play chords without muting strings

Other Key Differences
Jackson Pro Series Signature Marty Friedman MF-1 vs Ibanez JS1CR

Bridge Pickup
EMG MF Signature vs DiMarzio Satchur8
Different Bridge Pickup
Neck Pickup
EMG MF Signature vs Sustainiac
Different Neck Pickup
Body Wood
Mahogany vs Alder
Different Body Wood
Neck Wood
Mahogany vs Maple
Different Neck Wood
Fretboard Wood
Ebony vs Rosewood
Different Fretboard Wood
Headstock
3-3 vs 6
Different Headstock
Nut Material
Plastic vs Locking
Different Nut Material

Shared Features
Jackson Pro Series Signature Marty Friedman MF-1 vs Ibanez JS1CR

Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Paint Finish
Poly
Resistant paint that ages well
Pickups Power
Passive
Cleaner sound and no battery needed

Common Strengths

  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Ibanez JS1CR is probably the better product overall with its final score of 76 compared to the Jackson Pro Series Signature Marty Friedman MF-1's 70 score, although not by a lot.

The Ibanez JS1CR wins when it comes to sound, build quality. On the other hand, the Jackson Pro Series Signature Marty Friedman MF-1 has the upper hand when it comes to playability, value for the money.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Jackson Pro Series Signature Marty Friedman MF-1 is the better choice.

The Jackson Pro Series Signature Marty Friedman MF-1 meets 5 out of our 8 criteria items for beginner friendliness, while the Ibanez JS1CR meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Jackson Pro Series Signature Marty Friedman MF-1
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale

New Player Friendliness

Ibanez JS1CR
  • Comfortable shape
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Jackson Pro Series Signature Marty Friedman MF-1 Overview

  • From Jackson's 2021 Artist Signature series
  • Marty Friedman Signature
  • Made in China
  • 6 strings
  • 24.75"'' scale
  • 12" Fretboard Radius
  • Cracked Mirror top
  • Mahogany body
  • Mahogany neck
  • Ebony fretboard
  • Bridge pickup: EMG MF Signature (Humbucker/Passive)
  • Neck pickup: EMG MF Signature (Humbucker/Passive)
  • 2 volume and 2 tone Dome knobs
  • 3-way Switch
  • Jackson TOM-Style Adjustable with Anchored Tailpiece bridge
  • Speed Set neck
  • 22 Jumbo frets
  • Jackson Sealed Die-Cast Locking tuners
  • Compare Specs >

Ibanez JS1CR Overview

  • From Ibanez's 2019 JS series
  • Joe Satriani Signature
  • Made in Japan
  • 6 strings
  • 25.5"'' scale
  • 10" Fretboard Radius
  • Alder body
  • 3pc Maple/Bubinga neck
  • Rosewood fretboard
  • Bridge pickup: DiMarzio Satchur8 (Humbucker/Passive)
  • Neck pickup: Sustainiac (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Edge tremolo bridge
  • JS Bolt-On neck
  • 24 Medium frets
  • Gotoh machine heads tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Jackson Pro Series Signature Marty Friedman MF-1

Mahogany wood pattern used for guitar building
Mahogany
Ebony wood pattern used for guitar building
Ebony

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Woods Used in the Ibanez JS1CR

Maple wood pattern used for guitar building
Maple
Rosewood wood pattern used for guitar building
Rosewood
Alder wood pattern used for guitar building
Alder

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Winner: Jackson Pro Series Signature Marty Friedman MF-1.

Pickup Configuration

The Jackson Pro Series Signature Marty Friedman MF-1 has an HH configuration while the Ibanez JS1CR has HS pickups.

Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

On the other hand, An HS configuration gives you a bridge pickup with a lot of output for playing distortion parts, but you'll also have the bright sound of a Tele or Strat neck pickup for your clean tones.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the Jackson Pro Series Signature Marty Friedman MF-1 has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Jackson Pro Series Signature Marty Friedman MF-1.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Only the Ibanez JS1CR comes with some kind of pickup modification: Sustainer.

The pickups with Sustainer are able to recreate the 'feedback' you get when you hold your guitar near a speaker without muting the strings. This allows them to produce infinite sustain that you can use for as long as you want to create interest sounds and harmonics.

Jackson Pro Series Signature Marty Friedman MF-1 pickups switch and push knobs diagram
Jackson Pro Series Signature Marty Friedman MF-1's switch options
Ibanez JS1CR pickups switch and push knobs diagram
Ibanez JS1CR's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Ibanez JS1CR.

Final Sound Quality Scores

Jackson Pro Series Signature Marty Friedman MF-1
Pickups 90
Sustain 80
Versatility 53
Tuning Stability 75
Sound 75
Ibanez JS1CR
Pickups 85
Sustain 100
Versatility 74
Tuning Stability 85
Sound 86

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Jackson Pro Series Signature Marty Friedman MF-1 compares to the Ibanez JS1CR.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Jackson Pro Series Signature Marty Friedman MF-1 is built in China while the Ibanez JS1CR is made in Japan.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.

Winner: Ibanez JS1CR

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Jackson Pro Series Signature Marty Friedman MF-1 has a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

On the other hand, the Ibanez JS1CR comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

Winner: Ibanez JS1CR.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Jackson Pro Series Signature Marty Friedman MF-1's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

On the other hand, the Ibanez JS1CR's is a Edge. This is a double-locking tremolo system designed by Ibanez. It's a tremolo inspired by Floyd Roses but with its own design improvements, like a push-in arm, better-positioned fine-tuners for more right-hand comfortability, replaceable knife edges, and more mass for more sustain. These bridges offer tons of versatility, but they also require more work than simpler tremolos to set up.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Ibanez JS1CR.

Tuners

The Jackson Pro Series Signature Marty Friedman MF-1 has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Nevertheless, the Ibanez JS1CR has a locking nut, so it should have even better tune stability and doesn't need locking tuners.

Winner: Jackson Pro Series Signature Marty Friedman MF-1.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Jackson Pro Series Signature Marty Friedman MF-1 has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

On the other hand, the Ibanez JS1CR comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Ibanez JS1CR.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Jackson Pro Series Signature Marty Friedman MF-1
  • Locking Tuners
  • Expensive Wood
  • Top Brand Pickups
  • Cheap Fret Wire (NS)
  • Made in China
  • No High-Quality Nut
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Ibanez JS1CR
  • Made in Japan
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Sustainer Pickups
  • Tremolo
  • Retainer Bar
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Jackson Pro Series Signature Marty Friedman MF-1
Quality of materials 45
Features 60
Quality Control 65
Build Quality 57
Ibanez JS1CR
Quality of materials 51
Features 70
Quality Control 100
Build Quality 74

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Jackson Pro Series Signature Marty Friedman MF-1 Nut Width
Jackson Pro Series Signature Marty Friedman MF-1 Nut Width
Ibanez JS1CR Nut Width
Ibanez JS1CR Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Ibanez JS1CR has the wider nut with 43mm (1.693'') vs 42.9mm (1.688''). This is a 0.1mm (0.0050000000000001'') difference

This means that it will be more difficult to do bar chords on the Ibanez JS1CR, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Jackson Pro Series Signature Marty Friedman MF-1's Scale Length
Jackson Pro Series Signature Marty Friedman MF-1's Scale Length
Ibanez JS1CR's Scale Length
Ibanez JS1CR's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Ibanez JS1CR has the longest scale: 25.5". The Jackson Pro Series Signature Marty Friedman MF-1 is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Jackson Pro Series Signature Marty Friedman MF-1 Neck Profile
Jackson Pro Series Signature Marty Friedman MF-1's neck profile
Ibanez JS1CR Neck Profile
Ibanez JS1CR's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Jackson Pro Series Signature Marty Friedman MF-1 has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.

The Ibanez JS1CR, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Jackson Pro Series Signature Marty Friedman MF-1 Fingerboard Radius
Jackson Pro Series Signature Marty Friedman MF-1's Fingerboard radius
Ibanez JS1CR Fingerboard Radius
Ibanez JS1CR's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Ibanez JS1CR's fingerboard radius is smaller, which means it's more curved than the Jackson Pro Series Signature Marty Friedman MF-1's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Jackson Pro Series Signature Marty Friedman MF-1.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Jackson Pro Series Signature Marty Friedman MF-1:
Big Hands
Small Hands
Ibanez JS1CR:
Big Hands
Small Hands

Fret Size

Jackson Pro Series Signature Marty Friedman MF-1 Frets Size
Jackson Pro Series Signature Marty Friedman MF-1's Frets Size
Ibanez JS1CR Frets Size
Ibanez JS1CR's Frets Size

The Jackson Pro Series Signature Marty Friedman MF-1 has Jumbo frets, which should be taller than the Ibanez JS1CR's Medium frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Jackson Pro Series Signature Marty Friedman MF-1
Bending & Vibrato Ease 95
Chord Playability 55
Solo Playability 80
Playability 77
Ibanez JS1CR
Bending & Vibrato Ease 65
Chord Playability 65
Solo Playability 75
Playability 68

Specs Side-by-Side

Jackson Pro Series Signature Marty Friedman MF-1 vs Ibanez JS1CR
General Jackson Pro Series Signature Marty Friedman MF-1 Ibanez JS1CR
Brand: Jackson Ibanez
Year: 2021 2019
Configuration: HH HS
Strings: 6 6
Made in: China Japan
Series: Artist Signature JS
Colors: Purple Gray
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Mahogany Alder
Bridge: Jackson TOM-Style Adjustable with Anchored Tailpiece Edge tremolo
Neck
Neck Joint: Set Bolt-On
Tuners: Jackson Sealed Die-Cast Locking Gotoh machine heads
Fretboard: Ebony Rosewood
Neck Material: Mahogany 3pc Maple/Bubinga
Decoration: White Pearloid Block Mother of Pearl dot
Scale Size: 24.75" 25.5"
Shape: Speed JS
Thickness: 1st Fret: 0.775'' (19.7mm) - 12th Fret: 0.835'' (21.2mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.88'' (22.4mm)
Frets: 22 Jumbo Nickel Silver 24 Medium Nickel Silver
Fretboard Radius: 12" 10"
Nut: Plastic Locking
Nut Width: 42.9mm (1.688'') 43mm (1.693'')
Electronics
Bridge Pickup: EMG MF Signature (Humbucker / Passive) DiMarzio Satchur8 (Humbucker / Passive)
Middle Pickup:
Neck Pickup: EMG MF Signature (Humbucker / Passive) Sustainiac (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Dome
Pickup Mods: None Sustainer
Volume Controls: 2 1
Tone Controls: 2 1