Swap
Swap
Jackson Pro Series Signature Christian Andreu Rhoads RRT
Schecter E-1 Apocalypse
VS
Playability
78
Sound
63
Build
67
Value
69
Score
69
FIND IT ON:
Reverb logoSweetwater logoAmazon logoMusician's Friend logo
Playability
78
Sound
79
Build
75
Value
77
Score
77
FIND IT ON:
Reverb logoSweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

Jackson Pro Series Signature Christian Andreu Rhoads RRT vs Schecter E-1 Apocalypse

Reasons to Get
Jackson Pro Series Signature Christian Andreu Rhoads RRT over Schecter E-1 Apocalypse

Decorative Top
Flame Maple vs None
Finished with beautiful natural wood patterns
Release Year
2021 vs 2020
From a more recent year
Neck Profile
Speed vs Thin C
Thin and flat neck for playing fast
Neck Joint
Neck-Through vs Set
Stronger neck and easier access to upper frets
Pickups
H vs HH
Hum-free with more right hand freedom and sustain
Neck Thickness at 1st Fret
0.775'' (19.7mm) vs 0.79'' (20.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.835'' (21.2mm) vs 0.87'' (22.1mm)
More comfortable at higher frets for small hands
Nut Width
1.688'' (42.9mm) vs 1.654'' (42mm)
Less likely to mute strings by accident and more space for fingerstyle

Reasons to Get
Schecter E-1 Apocalypse over Jackson Pro Series Signature Christian Andreu Rhoads RRT

Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Neck Profile
Thin C vs Speed
Comfortable neck that works for most people
Pickups Brand
Schecter USA vs None
Pickups from a renown brand
Nut Material
Black Tusq XL vs Plastic
Good tuning stability with rich tone
Pickup Mods
Coil Split vs None
Splits humbuckers into single coil pickups
Switch Positions
3 vs 0
More tone options
Tone Knobs
1 vs 0
More tone control
Pickups
HH vs H
High output without hum
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.775'' (19.7mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.87'' (22.1mm) vs 0.835'' (21.2mm)
More comfortable at higher frets for big hands
Nut Width
1.654'' (42mm) vs 1.688'' (42.9mm)
Favors small hands, easier bar chords and other shapes
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Value Score
77 vs 69
Better price/quality relationship

Other Key Differences
Jackson Pro Series Signature Christian Andreu Rhoads RRT vs Schecter E-1 Apocalypse

Bridge Pickup
Jackson Covered High-Output Humbucking vs Schecter USA Apocalypse-VI
Different Bridge Pickup
Body Wood
Poplar vs Ash
Different Body Wood
Headstock
R6 vs 6
Different Headstock
Nut Material
Plastic vs Black Tusq XL
Different Nut Material

Shared Features
Jackson Pro Series Signature Christian Andreu Rhoads RRT vs Schecter E-1 Apocalypse

Neck Wood
Maple
Same Neck Wood
Fretboard Wood
Ebony
Same Fretboard Wood
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Number of Frets
24
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Pickups Power
Passive
Cleaner sound and no battery needed
Compound Radius
12" to 16"
Balanced playability for chords and single-notes
Type of Frets
Jumbo vs XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • Expensive Wood

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • From a High-Quality-Standards Country
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT

Schecter E-1 Apocalypse Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Schecter E-1 Apocalypse is probably the better product overall with its final score of 77 compared to the Jackson Pro Series Signature Christian Andreu Rhoads RRT's 69 score, although not by a lot.

The Schecter E-1 Apocalypse wins when it comes to sound, build quality, value for the money. On the other hand, the Jackson Pro Series Signature Christian Andreu Rhoads RRT has the upper hand when it comes to.

If you got small hands, you'll probably feel more comfortable playing the Schecter E-1 Apocalypse.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Schecter E-1 Apocalypse is the better choice.

The Schecter E-1 Apocalypse meets 7 out of our 8 criteria items for beginner friendliness, while the Jackson Pro Series Signature Christian Andreu Rhoads RRT meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Jackson Pro Series Signature Christian Andreu Rhoads RRT
  • Easy-to-use bridge
  • Locking tuners
  • Comfortable fretboard
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Narrow nut
  • Short scale

New Player Friendliness

Schecter E-1 Apocalypse
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Jackson Pro Series Signature Christian Andreu Rhoads RRT Overview

  • From Jackson's 2021 Artist Signature series
  • Christian Andreu Signature
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Flame Maple top
  • Poplar body
  • Maple neck
  • Ebony fretboard
  • Bridge pickup: Jackson Covered High-Output Humbucking (Humbucker/Passive)
  • 1 volume and 0 tone Dome knobs
  • Jackson TOM-Style Adjustable String-Through-Body bridge
  • Speed Neck-Through neck
  • 24 Jumbo frets
  • Jackson Sealed Die-Cast Locking tuners
  • Compare Specs >

Schecter E-1 Apocalypse Overview

  • From Schecter's 2020 Apocalypse series
  • Made in South Korea
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Swamp Ash body
  • Maple/Padauk Multi-ply w/Carbon Fiber Reinforcement Rods neck
  • Ebony fretboard
  • Bridge pickup: Schecter USA Apocalypse-VI (Humbucker/Passive)
  • Neck pickup: Schecter USA Apocalypse-VI (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • TonePros T3BT TOM & T1Z Tailpiece bridge
  • Thin C Set neck
  • 24 XL Jumbo Stainless Steel frets
  • Schecter Locking tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Woods Used in the Jackson Pro Series Signature Christian Andreu Rhoads RRT

Poplar wood pattern used for guitar building
Poplar

Poplar is a cheaper and heavier alternative to Alder wood. It terms of tone, it emphasizes the low-end and has cutting mids. It's relatively soft compared to most body woods. Find out more about Poplar.

Woods Used in the Schecter E-1 Apocalypse

Ash wood pattern used for guitar building
Ash

Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.

Winner: Schecter E-1 Apocalypse.

Pickup Configuration

The Jackson Pro Series Signature Christian Andreu Rhoads RRT has an H configuration while the Schecter E-1 Apocalypse has HH pickups.

A single H pickup gives you the advantage of having a little longer sustain (all other things being equal) because there will be less magnetic fields from other pickups affecting the strings' vibration. However, they also give you the least versatility because you won't have other pickups at different distances from the bridge to create different tones. A single humbucking pickup is used for noiseless high output, which is used mainly for Hard Rock genres.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The Schecter E-1 Apocalypse pickups from a more specialized brand than the Jackson Pro Series Signature Christian Andreu Rhoads RRT. Its pickups should give you a fuller, richer sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Schecter E-1 Apocalypse.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Schecter E-1 Apocalypse gives you 3 switch options while the Jackson Pro Series Signature Christian Andreu Rhoads RRT gives you 0. This means that the Schecter E-1 Apocalypse gives you more options to find the right pickup combination for the type of sound you want to achieve

Only the Schecter E-1 Apocalypse comes with some kind of pickup modification: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

The Jackson Pro Series Signature Christian Andreu Rhoads RRT doesn't come with pickup switching options.

Schecter E-1 Apocalypse pickups switch and push knobs diagram
Schecter E-1 Apocalypse's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Schecter E-1 Apocalypse.

Final Sound Quality Scores

Jackson Pro Series Signature Christian Andreu Rhoads RRT
Pickups 55
Sustain 80
Versatility 42
Tuning Stability 75
Sound 63
Schecter E-1 Apocalypse
Pickups 85
Sustain 85
Versatility 64
Tuning Stability 80
Sound 79

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Jackson Pro Series Signature Christian Andreu Rhoads RRT compares to the Schecter E-1 Apocalypse.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Jackson Pro Series Signature Christian Andreu Rhoads RRT is built in Indonesia while the Schecter E-1 Apocalypse is made in South Korea.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Jackson Pro Series Signature Christian Andreu Rhoads RRT has a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

On the other hand, the Schecter E-1 Apocalypse comes with a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).

Winner: Schecter E-1 Apocalypse.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the Schecter E-1 Apocalypse is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Schecter E-1 Apocalypse.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Jackson Pro Series Signature Christian Andreu Rhoads RRT has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

On the other hand, the Schecter E-1 Apocalypse comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Jackson Pro Series Signature Christian Andreu Rhoads RRT.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Jackson Pro Series Signature Christian Andreu Rhoads RRT
  • Locking Tuners
  • Expensive Wood
  • Neck-Through Build
  • Compound Radius Fretboard
  • Cheap Fret Wire (NS)
  • Made in Indonesia
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter E-1 Apocalypse
  • Stainless Steel Frets
  • Locking Tuners
  • Expensive Wood
  • Black Tusq XL Nut
  • Top Brand Pickups
  • Coil Split Pickups
  • Luminescent Inlay
  • Compound Radius Fretboard
  • Made in South Korea
  • No Neck-Through Build
  • No Weight Relief
  • No Tremolo
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Jackson Pro Series Signature Christian Andreu Rhoads RRT
Quality of materials 45
Features 80
Quality Control 75
Build Quality 67
Schecter E-1 Apocalypse
Quality of materials 71
Features 80
Quality Control 75
Build Quality 75

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Jackson Pro Series Signature Christian Andreu Rhoads RRT Nut Width
Jackson Pro Series Signature Christian Andreu Rhoads RRT Nut Width
Schecter E-1 Apocalypse Nut Width
Schecter E-1 Apocalypse Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Jackson Pro Series Signature Christian Andreu Rhoads RRT has the wider nut with 42.9mm (1.688'') vs 42mm (1.654''). This is a 0.9mm (0.034'') difference

This means that it will be more difficult to do bar chords on the Jackson Pro Series Signature Christian Andreu Rhoads RRT, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Jackson Pro Series Signature Christian Andreu Rhoads RRT and Schecter E-1 Apocalypse's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Jackson Pro Series Signature Christian Andreu Rhoads RRT Neck Profile
Jackson Pro Series Signature Christian Andreu Rhoads RRT's neck profile
Schecter E-1 Apocalypse Neck Profile
Schecter E-1 Apocalypse's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Jackson Pro Series Signature Christian Andreu Rhoads RRT has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.

The Schecter E-1 Apocalypse, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Jackson Pro Series Signature Christian Andreu Rhoads RRT Fretboard Compound Radius
Jackson Pro Series Signature Christian Andreu Rhoads RRT's Compound Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both have a compound radius. This means both offer you the best craftsmanship when it comes to fretboard design. You'll have an arc to help you play chords close to the nut, while also having a flat design at the higher frets for faster soloing and easier bends.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Jackson Pro Series Signature Christian Andreu Rhoads RRT favors large hands more than the Schecter E-1 Apocalypse. But it's still more comfortable for people with small hands, as you can see in the score meter below.

Jackson Pro Series Signature Christian Andreu Rhoads RRT:
Big Hands
Small Hands
Schecter E-1 Apocalypse:
Big Hands
Small Hands

Fret Size

Jackson Pro Series Signature Christian Andreu Rhoads RRT Frets Size
Jackson Pro Series Signature Christian Andreu Rhoads RRT's Frets Size
Schecter E-1 Apocalypse Frets Size
Schecter E-1 Apocalypse's Frets Size

The Schecter E-1 Apocalypse has XL Jumbo frets, which should be taller than the Jackson Pro Series Signature Christian Andreu Rhoads RRT's Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Jackson Pro Series Signature Christian Andreu Rhoads RRT
Bending & Vibrato Ease 75
Chord Playability 60
Solo Playability 100
Playability 78
Schecter E-1 Apocalypse
Bending & Vibrato Ease 75
Chord Playability 70
Solo Playability 90
Playability 78

Specs Side-by-Side

Jackson Pro Series Signature Christian Andreu Rhoads RRT vs Schecter E-1 Apocalypse
General Jackson Pro Series Signature Christian Andreu Rhoads RRT Schecter E-1 Apocalypse
Brand: Jackson Schecter
Year: 2021 2020
Configuration: H HH
Strings: 6 6
Made in: Indonesia South Korea
Series: Artist Signature Apocalypse
Colors: Natural Natural Gray
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Poplar Swamp Ash
Bridge: Jackson TOM-Style Adjustable String-Through-Body TonePros T3BT TOM & T1Z Tailpiece
Neck
Neck Joint: Neck-Through Set
Tuners: Jackson Sealed Die-Cast Locking Schecter Locking
Fretboard: Ebony Ebony
Neck Material: Maple Maple/Padauk Multi-ply w/Carbon Fiber Reinforcement Rods
Decoration: Triangle at 12th and 24th Fret
Scale Size: 25.5" 25.5"
Shape: Speed Thin C
Thickness: 1st Fret: 0.775'' (19.7mm) - 12th Fret: 0.835'' (21.2mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 24 Jumbo Nickel Silver 24 XL Jumbo Stainless Steel
Fretboard Radius: 12" to 16" 12" to 16"
Nut: Plastic Black Tusq XL
Nut Width: 42.9mm (1.688'') 42mm (1.654'')
Electronics
Bridge Pickup: Jackson Covered High-Output Humbucking (Humbucker / Passive) Schecter USA Apocalypse-VI (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Schecter USA Apocalypse-VI (Humbucker / Passive)
Switch: 0 Way 3 Way
Knobs: Dome Dome
Pickup Mods: None Coil Split
Volume Controls: 1 1
Tone Controls: 0 1