Swap
Swap
Jackson American Series Soloist SL3
ESP LTD SC-607 Baritone
VS
Playability
77
Sound
83
Build
82
Value
71
Score
81
FIND IT ON:
Reverb logoSweetwater logoAmazon logoMusician's Friend logo
Playability
78
Sound
76
Build
64
Value
73
Score
73
FIND IT ON:
Sweetwater logoReverb logo
Add to Compare
Add to Compare
Side to side spec comparison >

Jackson American Series Soloist SL3 vs LTD SC-607 Baritone

Reasons to Get
Jackson American Series Soloist SL3 over LTD SC-607 Baritone

Country of Manufacturing
United States vs Indonesia
Built with higher quality standards
Release Year
2022 vs 2020
From a more recent year
Compound Radius
12" to 16" vs 13.78"
Balanced playability for chords and single-notes
Neck Profile
Jackson Standard vs Thin U
Thin and flat neck for playing fast
Nut Material
Locking vs Plastic
Best tuning stability for intense tremolo usage
Strings
6 vs 7
Narrower neck and fewer strings to change
Switch Positions
5 vs 3
More tone options
Pickups
HSS vs HHX
High output with beautiful cleans and tone versatility
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.787'' (20mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.85'' (21.6mm) vs 0.866'' (22mm)
More comfortable at higher frets for small hands
Nut Width
1.688'' (42.9mm) vs 1.89'' (48mm)
Favors small hands, easier bar chords and other shapes
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Strap Lock
Yes vs None
Protects your guitar from dropping by locking the strap
Bridge
Floyd Rose vs Fixed
Allows intense vibratos and techniques like Dive Bombs
Scale Length
25.5'' (647.7mm) vs 27'' (685.8mm)
Easier bending, shorter fret separation and warmer natural tone
Pickups Power
Passive vs Active
Cleaner sound and no battery needed

Reasons to Get
ESP LTD SC-607 Baritone over Jackson American Series Soloist SL3

Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Neck Profile
Thin U vs Jackson Standard
Comfortable neck with more grip
Pickup Mods
Multi-Voicing vs None
Changes the voice (tones or gain) of the pickups
Strings
7 vs 6
Allows you to play lower notes
Pickups
HHX vs HSS
High output warm tones without a neck pickup
Neck Thickness at 1st Fret
0.787'' (20mm) vs 0.79'' (20.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.866'' (22mm) vs 0.85'' (21.6mm)
More comfortable at higher frets for big hands
Nut Width
1.89'' (48mm) vs 1.688'' (42.9mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Fixed vs Floyd Rose
Good sustain and needs no set-up
Scale Length
27'' (685.8mm) vs 25.5'' (647.7mm)
Lower action and brighter natural tone
Pickups Power
Active vs Passive
More output
Value Score
73 vs 71
Better price/quality relationship

Other Key Differences
Jackson American Series Soloist SL3 vs LTD SC-607 Baritone

Bridge Pickup
Seymour Duncan JB TB-4 vs Fishman SRC Fluence
Different Bridge Pickup
Middle Pickup
Seymour Duncan Custom Flat Strat SSL-6 RWRP vs Fishman SRC Fluence
Different Middle Pickup
Body Wood
Alder vs Mahogany
Different Body Wood
Headstock
6 vs R7
Different Headstock
Nut Material
Locking vs Plastic
Different Nut Material

Shared Features
Jackson American Series Soloist SL3 vs LTD SC-607 Baritone

Neck Wood
Maple
Same Neck Wood
Fretboard Wood
Ebony
Same Fretboard Wood
Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Number of Frets
24
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Neck Joint
Neck-Through
Stronger neck and easier access to upper frets
Type of Frets
Jumbo vs XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • Neck-Through Build
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Jackson American Series Soloist SL3 is probably the better product overall with its final score of 81 compared to the ESP LTD SC-607 Baritone's 73 score, although not by a lot.

The Jackson American Series Soloist SL3 wins when it comes to sound, build quality. On the other hand, the ESP LTD SC-607 Baritone has the upper hand when it comes to playability, value for the money.

If you got small hands, you'll probably feel more comfortable playing the Jackson American Series Soloist SL3.

Which One is Better for Beginners?

Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Jackson American Series Soloist SL3
  • Comfortable shape
  • Locking tuners
  • Comfortable fretboard
  • Tall frets
  • Comfortable neck
  • Narrow nut
  • Short scale
  • Easy-to-use bridge

New Player Friendliness

ESP LTD SC-607 Baritone
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Jackson American Series Soloist SL3 Overview

  • From Jackson's 2022 American series
  • Made in United States
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Alder body
  • 3-piece Maple neck
  • Ebony fretboard
  • Bridge pickup: Seymour Duncan JB TB-4 (Humbucker/Passive)
  • Middle pickup: Seymour Duncan Custom Flat Strat SSL-6 RWRP (Single Coil/Passive)
  • Neck pickup: Seymour Duncan Custom Flat Strat SSL-6 (Single Coil/Passive)
  • 1 volume and 1 tone Dome knobs
  • 5-way Switch
  • Floyd Rose 1500 Series Double-Locking Tremolo bridge
  • Jackson Standard Neck-Through neck
  • 24 Jumbo frets
  • Gotoh MG-T Locking tuners
  • Weight between 8.05lbs (3.7kgs) and 8.25lbs (3.7kgs)
  • Compare Specs >

ESP LTD SC-607 Baritone Overview

  • From ESP LTD's 2020 Signature series
  • Stephen Carpenter Signature
  • Made in Indonesia
  • 7 strings
  • 27"'' scale
  • 13.78" Fretboard Radius
  • Mahogany body
  • 3pc Maple neck
  • Macassar Ebony fretboard
  • Bridge pickup: Fishman SRC Fluence (Humbucker/Active)
  • Middle pickup: Fishman SRC Fluence (Humbucker/Active)
  • Neck pickup: (/)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Tonepros Locking TOM w/ String Thru bridge
  • Thin U Neck-Through neck
  • 24 XL Jumbo frets
  • LTD Locking tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Woods Used in the Jackson American Series Soloist SL3

Alder wood pattern used for guitar building
Alder

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Woods Used in the ESP LTD SC-607 Baritone

Mahogany wood pattern used for guitar building
Mahogany

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Winner: ESP LTD SC-607 Baritone.

Pickup Configuration

The Jackson American Series Soloist SL3 has an HSS configuration while the ESP LTD SC-607 Baritone has HHX pickups.

HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.

On the other hand, HHX means there's no pickup in the neck position. It's a rare pickup combination. It gives you high output with a warm tone for hard rock with a bit more versatility than single-pickup guitars. You'll have to be careful not to set the middle pickup too high if you want to avoid hitting it with your pick.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

You can purchase similar pickups to the Jackson American Series Soloist SL3's and use them on any guitar:

The Jackson American Series Soloist SL3's pickups are Passive while the ESP LTD SC-607 Baritone's are Active.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Jackson American Series Soloist SL3 gives you 5 switch options while the ESP LTD SC-607 Baritone gives you 3. This means that the Jackson American Series Soloist SL3 gives you more options to find the right pickup combination for the type of sound you want to achieve

Only the ESP LTD SC-607 Baritone comes with some kind of pickup modification: Multi-Voicing.

Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.

Jackson American Series Soloist SL3 pickups switch selector and push knobs diagram
Jackson American Series Soloist SL3's switch options
ESP LTD SC-607 Baritone pickups switch and push knobs diagram
ESP LTD SC-607 Baritone's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Jackson American Series Soloist SL3.

Final Sound Quality Scores

Jackson American Series Soloist SL3
Pickups 85
Sustain 80
Versatility 70
Tuning Stability 95
Sound 83
ESP LTD SC-607 Baritone
Pickups 85
Sustain 85
Versatility 59
Tuning Stability 75
Sound 76

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Jackson American Series Soloist SL3 compares to the ESP LTD SC-607 Baritone.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Jackson American Series Soloist SL3 is built in United States while the ESP LTD SC-607 Baritone is made in Indonesia.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Jackson American Series Soloist SL3

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Jackson American Series Soloist SL3 has a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

On the other hand, the ESP LTD SC-607 Baritone comes with a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Winner: Jackson American Series Soloist SL3.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Jackson American Series Soloist SL3's brige is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

On the other hand, the ESP LTD SC-607 Baritone's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Jackson American Series Soloist SL3.

Tuners

They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Jackson American Series Soloist SL3
  • Locking Tuners
  • Made in United States
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Neck-Through Build
  • Luminescent Inlay
  • Tremolo
  • Compound Radius Fretboard
  • Strap Lock
  • Cheap Fret Wire (NS)
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No 21:1 Tuner Ratio
  • No Retainer Bar
Strengths & Weaknesses
ESP LTD SC-607 Baritone
  • Locking Tuners
  • Expensive Wood
  • Top Brand Pickups
  • Neck-Through Build
  • Multi-Voicing Pickups
  • Cheap Fret Wire (NS)
  • Made in Indonesia
  • No High-Quality Nut
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Jackson American Series Soloist SL3
Quality of materials 51
Features 100
Quality Control 95
Build Quality 82
ESP LTD SC-607 Baritone
Quality of materials 41
Features 75
Quality Control 75
Build Quality 64

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Jackson American Series Soloist SL3 Nut Width
Jackson American Series Soloist SL3 Nut Width
ESP LTD SC-607 Baritone Nut Width
ESP LTD SC-607 Baritone Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the ESP LTD SC-607 Baritone has the wider nut with 48mm (1.89'') vs 42.9mm (1.688''). This is a 5.1mm (0.202'') difference

This means that it will be more difficult to do bar chords on the ESP LTD SC-607 Baritone, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Jackson American Series Soloist SL3's Scale Length
Jackson American Series Soloist SL3's Scale Length
ESP LTD SC-607 Baritone's Scale Length
ESP LTD SC-607 Baritone's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The ESP LTD SC-607 Baritone has the longest scale: 27". The Jackson American Series Soloist SL3 is only 25.5" long. This is a 1.5'' (38.1mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Jackson American Series Soloist SL3 Neck Profile
Jackson American Series Soloist SL3's neck profile
ESP LTD SC-607 Baritone Neck Profile
ESP LTD SC-607 Baritone's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Jackson American Series Soloist SL3 has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.

The ESP LTD SC-607 Baritone, on the other hand, has a U neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

Fretboard Radius

Jackson American Series Soloist SL3 Fretboard Compound Radius
Jackson American Series Soloist SL3's Compound Fretboard Radius
ESP LTD SC-607 Baritone Fingerboard Radius
ESP LTD SC-607 Baritone's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Jackson American Series Soloist SL3 is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the ESP LTD SC-607 Baritone favors large hands more than the Jackson American Series Soloist SL3.

Jackson American Series Soloist SL3:
Big Hands
Small Hands
ESP LTD SC-607 Baritone:
Big Hands
Small Hands

Fret Size

Jackson American Series Soloist SL3 Frets Size
Jackson American Series Soloist SL3's Frets Size
ESP LTD SC-607 Baritone Frets Size
ESP LTD SC-607 Baritone's Frets Size

The ESP LTD SC-607 Baritone has XL Jumbo frets, which should be taller than the Jackson American Series Soloist SL3's Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Jackson American Series Soloist SL3
Bending & Vibrato Ease 70
Chord Playability 60
Solo Playability 100
Playability 77
ESP LTD SC-607 Baritone
Bending & Vibrato Ease 85
Chord Playability 60
Solo Playability 90
Playability 78

Specs Side-by-Side

Jackson American Series Soloist SL3 vs LTD SC-607 Baritone
General Jackson American Series Soloist SL3 LTD SC-607 Baritone
Brand: Jackson ESP LTD
Year: 2022 2020
Configuration: HSS HHX
Strings: 6 7
Made in: United States Indonesia
Series: American Signature
Colors: White, Black, Blue, Green Purple
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Alder Mahogany
Bridge: Floyd Rose 1500 Series Double-Locking Tremolo Tonepros Locking TOM w/ String Thru
Neck
Neck Joint: Neck-Through Neck-Through
Tuners: Gotoh MG-T Locking LTD Locking
Fretboard: Ebony Macassar Ebony
Neck Material: 3-piece Maple 3pc Maple
Decoration: Inverted Mother of Pearl Sharkfin
Scale Size: 25.5" 27"
Shape: Jackson Standard Thin U
Thickness: 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.85'' (21.6mm) 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm)
Frets: 24 Jumbo Nickel Silver 24 XL Jumbo Nickel Silver
Fretboard Radius: 12" to 16" 13.78"
Nut: Locking Plastic
Nut Width: 42.9mm (1.688'') 48mm (1.89'')
Electronics
Bridge Pickup: Seymour Duncan JB TB-4 (Humbucker / Passive) Fishman SRC Fluence (Humbucker / Active)
Middle Pickup: Seymour Duncan Custom Flat Strat SSL-6 RWRP (Single Coil / Passive) Fishman SRC Fluence (Humbucker / Active)
Neck Pickup: Seymour Duncan Custom Flat Strat SSL-6 (Single Coil / Passive)
Switch: 5 Way 3 Way
Knobs: Dome Dome
Pickup Mods: None Multi-Voicing
Volume Controls: 1 1
Tone Controls: 1 1