Swap
Swap
Jackson American Series Soloist SL2MG HT
Schecter Reaper-7 Multiscale
VS
Playability
78
Sound
79
Build
89
Value
72
Score
82
FIND IT ON:
Sweetwater logoReverb logoAmazon logoMusician's Friend logo
Playability
78
Sound
67
Build
63
Value
69
Score
69
FIND IT ON:
Sweetwater logoReverb logoMusician's Friend logo
Add to Compare
Add to Compare
Side to side spec comparison >

Jackson American Series Soloist SL2MG HT vs Schecter Reaper-7 Multiscale

Reasons to Get
Jackson American Series Soloist SL2MG HT over Schecter Reaper-7 Multiscale

Country of Manufacturing
United States vs Indonesia
Built with higher quality standards
Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Release Year
2024 vs 2019
From a more recent year
Scale Length
25.5" vs 27" to 25.5"
Easier to adapt to
Compound Radius
12" to 16" vs 20"
Balanced playability for chords and single-notes
Neck Profile
Jackson Standard vs Ultra Thin C
Thin and flat neck for playing fast
Pickups Brand
EMG vs None
Pickups from a renown brand
Nut Material
Ivory Tusq vs Graphite
Resistant, good tuning stability and rich tone
Neck Joint
Neck-Through vs Set
Stronger neck and easier access to upper frets
Strings
6 vs 7
Narrower neck and fewer strings to change
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.748'' (19mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.85'' (21.6mm) vs 0.787'' (20mm)
More comfortable at higher frets for big hands
Nut Width
1.688'' (42.9mm) vs 1.89'' (48mm)
Favors small hands, easier bar chords and other shapes
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Strap Lock
Yes vs None
Protects your guitar from dropping by locking the strap
Avg. Weight
7.5lbs (3.4kgs) vs 7.95lbs (3.6kgs)
Tends to be lighter
Pickups Power
Active vs Passive
More output
Value Score
72 vs 69
Better price/quality relationship

Reasons to Get
Schecter Reaper-7 Multiscale over Jackson American Series Soloist SL2MG HT

Decorative Top
Burl vs None
Finished with beautiful natural wood patterns
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Scale Length
27" to 25.5" vs 25.5"
Less fret buzz with less string stiffness
Neck Profile
Ultra Thin C vs Jackson Standard
Comfortable neck that works for most people
Pickup Mods
Coil Split vs None
Splits humbuckers into single coil pickups
Strings
7 vs 6
Allows you to play lower notes
Neck Thickness at 1st Fret
0.748'' (19mm) vs 0.79'' (20.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.787'' (20mm) vs 0.85'' (21.6mm)
More comfortable at higher frets for small hands
Nut Width
1.89'' (48mm) vs 1.688'' (42.9mm)
Less likely to mute strings by accident and more space for fingerstyle
Pickups Power
Passive vs Active
Cleaner sound and no battery needed

Other Key Differences
Jackson American Series Soloist SL2MG HT vs Schecter Reaper-7 Multiscale

Bridge Pickup
EMG 81 vs Schecter Diamond Decimator
Different Bridge Pickup
Neck Pickup
EMG 85 vs Schecter Diamond Decimator
Different Neck Pickup
Body Wood
Alder vs Ash
Different Body Wood
Headstock
6 vs R7
Different Headstock
Nut Material
Ivory Tusq vs Graphite
Different Nut Material

Shared Features
Jackson American Series Soloist SL2MG HT vs Schecter Reaper-7 Multiscale

Neck Wood
Maple
Same Neck Wood
Fretboard Wood
Ebony
Same Fretboard Wood
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
24
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Type of Frets
Jumbo vs XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • Expensive Wood

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Jackson American Series Soloist SL2MG HT is probably the better product overall with its final score of 82 compared to the Schecter Reaper-7 Multiscale's 69 score, which is a significant difference.

The Jackson American Series Soloist SL2MG HT wins when it comes to sound, build quality, value for the money. On the other hand, the Schecter Reaper-7 Multiscale has the upper hand when it comes to.

If you got small hands, you'll probably feel more comfortable playing the Jackson American Series Soloist SL2MG HT.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Jackson American Series Soloist SL2MG HT is the better choice.

The Jackson American Series Soloist SL2MG HT meets 6 out of our 8 criteria items for beginner friendliness, while the Schecter Reaper-7 Multiscale meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Jackson American Series Soloist SL2MG HT
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Comfortable fretboard
  • Tall frets
  • Comfortable neck
  • Narrow nut
  • Short scale

New Player Friendliness

Schecter Reaper-7 Multiscale
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Jackson American Series Soloist SL2MG HT Overview

  • From Jackson's 2024 American series
  • Made in United States
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Alder body
  • Maple neck
  • Ebony fretboard
  • Bridge pickup: EMG 81 (Humbucker/Active)
  • Neck pickup: EMG 85 (Humbucker/Active)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Hipshot 6 Fixed .175 bridge
  • Jackson Standard Neck-Through neck
  • 24 Jumbo Stainless Steel frets
  • Gotoh MG-T Locking tuners
  • Weight between 7.375lbs (3.3kgs) and 7.625lbs (3.5kgs)
  • Compare Specs >

Schecter Reaper-7 Multiscale Overview

  • From Schecter's 2019 Reaper series
  • Made in Indonesia
  • 7 strings
  • 27" to 25.5"'' scale
  • 20" Fretboard Radius
  • Burl top
  • Swamp Ash body
  • Maple/Walnut Multi-ply w/ Carbon Fiber Reinforcement Rods neck
  • Ebony fretboard
  • Bridge pickup: Schecter Diamond Decimator (Humbucker/Passive)
  • Neck pickup: Schecter Diamond Decimator (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Hipshot Hardtail (.125) w/ String Thru Body bridge
  • Ultra Thin C Set neck
  • 24 XL Jumbo frets
  • Schecter tuners
  • Weight between 7.6lbs (3.4kgs) and 8.3lbs (3.8kgs)
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Woods Used in the Jackson American Series Soloist SL2MG HT

Alder wood pattern used for guitar building
Alder

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Woods Used in the Schecter Reaper-7 Multiscale

Ash wood pattern used for guitar building
Ash

Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.

Winner: Schecter Reaper-7 Multiscale.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The Jackson American Series Soloist SL2MG HT has pickups from a more specialized brand than the Schecter Reaper-7 Multiscale. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Heavy Metal and similar genres.

You can purchase similar pickups to the Jackson American Series Soloist SL2MG HT's and use them on any guitar:

The Jackson American Series Soloist SL2MG HT's pickups are Active while the Schecter Reaper-7 Multiscale's are Passive.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: Jackson American Series Soloist SL2MG HT.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Only the Schecter Reaper-7 Multiscale comes with some kind of pickup modification: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

Jackson American Series Soloist SL2MG HT pickups switch and push knobs diagram
Jackson American Series Soloist SL2MG HT's switch options
Schecter Reaper-7 Multiscale pickups switch and push knobs diagram
Schecter Reaper-7 Multiscale's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Schecter Reaper-7 Multiscale.

Final Sound Quality Scores

Jackson American Series Soloist SL2MG HT
Pickups 95
Sustain 90
Versatility 49
Tuning Stability 80
Sound 79
Schecter Reaper-7 Multiscale
Pickups 55
Sustain 80
Versatility 64
Tuning Stability 70
Sound 67

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Jackson American Series Soloist SL2MG HT compares to the Schecter Reaper-7 Multiscale.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Jackson American Series Soloist SL2MG HT is built in United States while the Schecter Reaper-7 Multiscale is made in Indonesia.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Jackson American Series Soloist SL2MG HT

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Jackson American Series Soloist SL2MG HT has a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

On the other hand, the Schecter Reaper-7 Multiscale comes with a Graphite nut. It's a self-lubricating material that will allow the strings to slide over the nut without a lot of friction. It's a good type of nut if you want to have better tuning stability than with plastic, although it's not as resistant as Bone or Tusq.

Winner: Jackson American Series Soloist SL2MG HT.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the Jackson American Series Soloist SL2MG HT is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Jackson American Series Soloist SL2MG HT.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

The Jackson American Series Soloist SL2MG HT has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Jackson American Series Soloist SL2MG HT.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Jackson American Series Soloist SL2MG HT has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

On the other hand, the Schecter Reaper-7 Multiscale comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Jackson American Series Soloist SL2MG HT.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Jackson American Series Soloist SL2MG HT
  • Stainless Steel Frets
  • Locking Tuners
  • Made in United States
  • Expensive Wood
  • Ivory Tusq Nut
  • Top Brand Pickups
  • Neck-Through Build
  • Luminescent Inlay
  • Compound Radius Fretboard
  • Strap Lock
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Tremolo
  • No 21:1 Tuner Ratio
Strengths & Weaknesses
Schecter Reaper-7 Multiscale
  • Expensive Wood
  • Coil Split Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Jackson American Series Soloist SL2MG HT
Quality of materials 81
Features 90
Quality Control 95
Build Quality 89
Schecter Reaper-7 Multiscale
Quality of materials 55
Features 60
Quality Control 75
Build Quality 63

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Jackson American Series Soloist SL2MG HT Nut Width
Jackson American Series Soloist SL2MG HT Nut Width
Schecter Reaper-7 Multiscale Nut Width
Schecter Reaper-7 Multiscale Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Schecter Reaper-7 Multiscale has the wider nut with 48mm (1.89'') vs 42.9mm (1.688''). This is a 5.1mm (0.202'') difference

This means that it will be more difficult to do bar chords on the Schecter Reaper-7 Multiscale, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Jackson American Series Soloist SL2MG HT's Scale Length
Jackson American Series Soloist SL2MG HT's Scale Length
Schecter Reaper-7 Multiscale's Scale Length
Schecter Reaper-7 Multiscale's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, the Schecter Reaper-7 Multiscale features a multi-scale of 27" to 25.5" while the Jackson American Series Soloist SL2MG HT has a regular scale of 25.5".

A multi-scale fingerboard incorporates two scale lengths at the same time. This is present in some instruments with long scale to give a different tension to the lower strings than the higher strings. The thickest strings need more tension to avoid fret buzz (especially when tuned low), so the scale is longer for these strings, while the thinnest strings will need less tension (because they have a lower gauge), so they have a shorter scale to reduce stiffness for bends.

It can feel awkward if you've never played a multi-scale because the frets will have more separation for the higher strings, but a lot of people love their versatility.

On the other hand, the Jackson American Series Soloist SL2MG HT's 25.5" regular scale means it has a fixed scale for all the strings.This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Jackson American Series Soloist SL2MG HT Neck Profile
Jackson American Series Soloist SL2MG HT's neck profile
Schecter Reaper-7 Multiscale Neck Profile
Schecter Reaper-7 Multiscale's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Jackson American Series Soloist SL2MG HT has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.

The Schecter Reaper-7 Multiscale, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Jackson American Series Soloist SL2MG HT Fretboard Compound Radius
Jackson American Series Soloist SL2MG HT's Compound Fretboard Radius
Schecter Reaper-7 Multiscale Fingerboard Radius
Schecter Reaper-7 Multiscale's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Jackson American Series Soloist SL2MG HT is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Schecter Reaper-7 Multiscale favors large hands more than the Jackson American Series Soloist SL2MG HT.

Jackson American Series Soloist SL2MG HT:
Big Hands
Small Hands
Schecter Reaper-7 Multiscale:
Big Hands
Small Hands

Fret Size

Jackson American Series Soloist SL2MG HT Frets Size
Jackson American Series Soloist SL2MG HT's Frets Size
Schecter Reaper-7 Multiscale Frets Size
Schecter Reaper-7 Multiscale's Frets Size

The Schecter Reaper-7 Multiscale has XL Jumbo frets, which should be taller than the Jackson American Series Soloist SL2MG HT's Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Jackson American Series Soloist SL2MG HT
Bending & Vibrato Ease 75
Chord Playability 60
Solo Playability 100
Playability 78
Schecter Reaper-7 Multiscale
Bending & Vibrato Ease 90
Chord Playability 55
Solo Playability 90
Playability 78

Specs Side-by-Side

Jackson American Series Soloist SL2MG HT vs Schecter Reaper-7 Multiscale
General Jackson American Series Soloist SL2MG HT Schecter Reaper-7 Multiscale
Brand: Jackson Schecter
Year: 2024 2019
Configuration: HH HH
Strings: 6 7
Made in: United States Indonesia
Series: American Reaper
Colors: Black, Green Black Burst, Blue Burst, Orange Burst
Left-Handed Version: No Yes
Body
Type: Solid Body Solid Body
Body Material: Alder Swamp Ash
Bridge: Hipshot 6 Fixed .175 Hipshot Hardtail (.125) w/ String Thru Body
Neck
Neck Joint: Neck-Through Set
Tuners: Gotoh MG-T Locking Schecter
Fretboard: Ebony Ebony
Neck Material: Maple Maple/Walnut Multi-ply w/ Carbon Fiber Reinforcement Rods
Decoration: Inverted Mother of Pearl Sharkfin Pearloid Offset/Reverse Dots
Scale Size: 25.5" 27" to 25.5"
Shape: Jackson Standard Ultra Thin C
Thickness: 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.85'' (21.6mm) 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm)
Frets: 24 Jumbo Stainless Steel 24 XL Jumbo Nickel Silver
Fretboard Radius: 12" to 16" 20"
Nut: Ivory Tusq Graphite
Nut Width: 42.9mm (1.688'') 48mm (1.89'')
Electronics
Bridge Pickup: EMG 81 (Humbucker / Active) Schecter Diamond Decimator (Humbucker / Passive)
Middle Pickup:
Neck Pickup: EMG 85 (Humbucker / Active) Schecter Diamond Decimator (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Dome
Pickup Mods: None Coil Split
Volume Controls: 1 1
Tone Controls: 1 1