Swap
Swap
Guild Starfire IV ST Vintage Sunburst
Schecter Traditional Pro
VS
Playability
80
Sound
66
Build
65
Value
70
Score
70
FIND IT ON:
Reverb logoSweetwater logo
Playability
73
Sound
78
Build
65
Value
77
Score
72
FIND IT ON:
Reverb logoSweetwater logoAmazon logoMusician's Friend logo
Add to Compare
Add to Compare
Side to side spec comparison >

Guild Starfire IV ST Vintage Sunburst vs Schecter Traditional Pro

Reasons to Get
Guild Starfire IV ST Vintage Sunburst over Schecter Traditional Pro

Neck Profile
Vintage Soft "U" vs Thin C
Comfortable neck with more grip
Body Type
Semi-Hollow vs Solid Body
Lighter and allows more gain than a hollowbody
Neck Thickness at 1st Fret
0.787'' (20mm) vs 0.79'' (20.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.945'' (24mm) vs 0.87'' (22.1mm)
More comfortable at higher frets for big hands
Nut Width
1.687'' (42.8mm) vs 1.654'' (42mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Fixed vs Tremolo
Good sustain and needs no set-up
Scale Length
24.75'' (628.7mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
24.764'' (629mm) vs 14'' (355.6mm)
Flatter fretboard makes it easier to play single notes and bend

Reasons to Get
Schecter Traditional Pro over Guild Starfire IV ST Vintage Sunburst

Decorative Top
Flamed Maple vs None
Finished with beautiful natural wood patterns
Release Year
2023 vs 2020
From a more recent year
Neck Profile
Thin C vs Vintage Soft "U"
Comfortable neck that works for most people
Pickups Brand
Schecter USA vs None
Pickups from a renown brand
Neck Joint
Bolt-On vs Set
Allows you to detach and swap the neck
Body Type
Solid Body vs Semi-Hollow
Feedback free
Switch Positions
5 vs 3
More tone options
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.787'' (20mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.87'' (22.1mm) vs 0.945'' (24mm)
More comfortable at higher frets for small hands
Nut Width
1.654'' (42mm) vs 1.687'' (42.8mm)
Favors small hands, easier bar chords and other shapes
Bridge
Tremolo vs Fixed
Simple vibratos without too much maintenance
Scale Length
25.5'' (647.7mm) vs 24.75'' (628.7mm)
Lower action and brighter natural tone
Fretboard Radius
14'' (355.6mm) vs 24.764'' (629mm)
More curved fretboard helpful to play chords without muting strings
Value Score
77 vs 70
Better price/quality relationship

Other Key Differences
Guild Starfire IV ST Vintage Sunburst vs Schecter Traditional Pro

Bridge Pickup
Guild LB-1 vs Schecter USA Z-Plus
Different Bridge Pickup
Neck Pickup
Guild LB-1 vs Schecter USA Z-Plus
Different Neck Pickup
Body Wood
Maple vs Alder
Different Body Wood
Neck Wood
Mahogany vs Roasted Maple
Different Neck Wood
Headstock
3-3 vs 6
Different Headstock
Nut Material
Bone vs Black Tusq XL
Different Nut Material

Shared Features
Guild Starfire IV ST Vintage Sunburst vs Schecter Traditional Pro

Fretboard Wood
Ebony
Same Fretboard Wood
Strings
6
Same playing style
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
22
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Pickups Power
Passive
Cleaner sound and no battery needed
Type of Frets
Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Nut
  • Expensive Wood

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

Guild Starfire IV ST Vintage Sunburst Prices

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Schecter Traditional Pro is probably the better product overall with its final score of 72 compared to the Guild Starfire IV ST Vintage Sunburst's 70 score, although not by a lot.

The Schecter Traditional Pro wins when it comes to sound, value for the money. On the other hand, the Guild Starfire IV ST Vintage Sunburst has the upper hand when it comes to playability.

If you got small hands, you'll probably feel more comfortable playing the Schecter Traditional Pro.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Schecter Traditional Pro is the better choice.

The Schecter Traditional Pro meets 6 out of our 8 criteria items for beginner friendliness, while the Guild Starfire IV ST Vintage Sunburst meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Guild Starfire IV ST Vintage Sunburst
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

New Player Friendliness

Schecter Traditional Pro
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Guild Starfire IV ST Vintage Sunburst Overview

  • From Guild's 2020 Newark St. Collection series
  • Made in Indonesia
  • 6 strings
  • 24.75"'' scale
  • 24.764" Fretboard Radius
  • Maple body
  • Mahogany with Maple Center Strip neck
  • Ebony fretboard
  • Bridge pickup: Guild LB-1 (Humbucker/Passive)
  • Neck pickup: Guild LB-1 (Humbucker/Passive)
  • 1 volume and 1 tone Bell knobs
  • 3-way Switch
  • Guild Tune-O-Matic bridge
  • Vintage Soft "U" Set neck
  • 22 Jumbo frets
  • Grover Sta-Tite Open-Gear 18:1 tuners
  • Compare Specs >

Schecter Traditional Pro Overview

  • From Schecter's 2023 Traditional Pro series
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 14" Fretboard Radius
  • Flamed Maple top
  • Alder body
  • Roasted Maple w/ Carbon Fiber Reinforcement Rods neck
  • Ebony fretboard
  • Bridge pickup: Schecter USA Z-Plus (Humbucker/Passive)
  • Neck pickup: Schecter USA Z-Plus (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 5-way Switch
  • Diamond Vintage Tremolo bridge
  • Thin C Bolt-On neck
  • 22 Jumbo frets
  • Schecter Locking tuners
  • Weight between 7.55lbs (3.4kgs) and 7.85lbs (3.6kgs)
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Ebony wood pattern used for guitar building
Ebony

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Woods Used in the Guild Starfire IV ST Vintage Sunburst

Mahogany wood pattern used for guitar building
Mahogany
Maple wood pattern used for guitar building
Maple

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Woods Used in the Schecter Traditional Pro

Roasted Maple wood pattern used for guitar building
Roasted Maple
Alder wood pattern used for guitar building
Alder

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Winner: Guild Starfire IV ST Vintage Sunburst.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The Schecter Traditional Pro pickups from a more specialized brand than the Guild Starfire IV ST Vintage Sunburst. Its pickups should give you a fuller, richer sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Schecter Traditional Pro.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Schecter Traditional Pro gives you 5 switch options while the Guild Starfire IV ST Vintage Sunburst gives you 3. This means that the Schecter Traditional Pro gives you more options to find the right pickup combination for the type of sound you want to achieve

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

The Guild Starfire IV ST Vintage Sunburst doesn't come with pickup switching options.

Schecter Traditional Pro pickups switch selector and push knobs diagram
Schecter Traditional Pro's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Schecter Traditional Pro.

Final Sound Quality Scores

Guild Starfire IV ST Vintage Sunburst
Pickups 60
Sustain 85
Versatility 49
Tuning Stability 70
Sound 66
Schecter Traditional Pro
Pickups 90
Sustain 80
Versatility 67
Tuning Stability 75
Sound 78

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Guild Starfire IV ST Vintage Sunburst compares to the Schecter Traditional Pro.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Guild Starfire IV ST Vintage Sunburst has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

On the other hand, the Schecter Traditional Pro comes with a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Guild Starfire IV ST Vintage Sunburst's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

On the other hand, the Schecter Traditional Pro's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

The Schecter Traditional Pro has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Schecter Traditional Pro.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Guild Starfire IV ST Vintage Sunburst has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

On the other hand, the Schecter Traditional Pro comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Schecter Traditional Pro.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Guild Starfire IV ST Vintage Sunburst
  • Expensive Wood
  • Bone Nut
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter Traditional Pro
  • Locking Tuners
  • Expensive Wood
  • Black Tusq XL Nut
  • Top Brand Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • Made in Indonesia
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Guild Starfire IV ST Vintage Sunburst
Quality of materials 66
Features 55
Quality Control 75
Build Quality 65
Schecter Traditional Pro
Quality of materials 60
Features 65
Quality Control 70
Build Quality 65

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Guild Starfire IV ST Vintage Sunburst Nut Width
Guild Starfire IV ST Vintage Sunburst Nut Width
Schecter Traditional Pro Nut Width
Schecter Traditional Pro Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Guild Starfire IV ST Vintage Sunburst has the wider nut with 42.8mm (1.687'') vs 42mm (1.654''). This is a 0.8mm (0.033'') difference

This means that it will be more difficult to do bar chords on the Guild Starfire IV ST Vintage Sunburst, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Guild Starfire IV ST Vintage Sunburst's Scale Length
Guild Starfire IV ST Vintage Sunburst's Scale Length
Schecter Traditional Pro's Scale Length
Schecter Traditional Pro's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Schecter Traditional Pro has the longest scale: 25.5". The Guild Starfire IV ST Vintage Sunburst is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Guild Starfire IV ST Vintage Sunburst Neck Profile
Guild Starfire IV ST Vintage Sunburst's neck profile
Schecter Traditional Pro Neck Profile
Schecter Traditional Pro's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Guild Starfire IV ST Vintage Sunburst has a U type of neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

The Schecter Traditional Pro, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Guild Starfire IV ST Vintage Sunburst Fingerboard Radius
Guild Starfire IV ST Vintage Sunburst's Fingerboard radius
Schecter Traditional Pro Fingerboard Radius
Schecter Traditional Pro's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Schecter Traditional Pro's fingerboard radius is smaller, which means it's more curved than the Guild Starfire IV ST Vintage Sunburst's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Guild Starfire IV ST Vintage Sunburst.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Guild Starfire IV ST Vintage Sunburst favors large hands more than the Schecter Traditional Pro. But it's still more comfortable for people with small hands, as you can see in the score meter below.

Guild Starfire IV ST Vintage Sunburst:
Big Hands
Small Hands
Schecter Traditional Pro:
Big Hands
Small Hands

Fret Size

Guild Starfire IV ST Vintage Sunburst and Schecter Traditional Pro Frets Size
Both have a similar Jumbo fret size

Both have a Jumbo fret size. This is one of the tallest frets you can get. You won't feel the fretboard when pressing down the strings. It will give you the best sustain and all types of chords will be easier to play. However, you can end up changing the pitch of your notes if you press too hard, which is something people used to feeling the fretboard do when trying Jumbo frets for the first time.

Final Playability Scores

Guild Starfire IV ST Vintage Sunburst
Bending & Vibrato Ease 95
Chord Playability 75
Solo Playability 70
Playability 80
Schecter Traditional Pro
Bending & Vibrato Ease 80
Chord Playability 60
Solo Playability 80
Playability 73

Specs Side-by-Side

Guild Starfire IV ST Vintage Sunburst vs Schecter Traditional Pro
General Guild Starfire IV ST Vintage Sunburst Schecter Traditional Pro
Brand: Guild Schecter
Year: 2020 2023
Configuration: HH HH
Strings: 6 6
Made in: Indonesia Indonesia
Series: Newark St. Collection Traditional Pro
Colors: Sunburst, Green, Natural Purple Burst
Left-Handed Version: No No
Body
Type: Semi-Hollow Solid Body
Body Material: Maple Alder
Bridge: Guild Tune-O-Matic Diamond Vintage Tremolo
Neck
Neck Joint: Set Bolt-On
Tuners: Grover Sta-Tite Open-Gear 18:1 Schecter Locking
Fretboard: Ebony Ebony
Neck Material: Mahogany with Maple Center Strip Roasted Maple w/ Carbon Fiber Reinforcement Rods
Decoration: Pearloid Dots Pearloid Dots
Scale Size: 24.75" 25.5"
Shape: Vintage Soft "U" Thin C
Thickness: 1st Fret: 0.787'' (20mm) - 12th Fret: 0.945'' (24mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 22 Jumbo Nickel Silver 22 Jumbo Nickel Silver
Fretboard Radius: 24.764" 14"
Nut: Bone Black Tusq XL
Nut Width: 42.8mm (1.687'') 42mm (1.654'')
Electronics
Bridge Pickup: Guild LB-1 (Humbucker / Passive) Schecter USA Z-Plus (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Guild LB-1 (Humbucker / Passive) Schecter USA Z-Plus (Humbucker / Passive)
Switch: 3 Way 5 Way
Knobs: Bell Dome
Pickup Mods: None None
Volume Controls: 1 1
Tone Controls: 1 1