Swap
Swap
Gibson ES-335
Sire Larry Carlton H7
VS
Playability
73
Sound
72
Build
70
Value
57
Score
72
FIND IT ON:
Reverb logoSweetwater logoMusician's Friend logo
Playability
77
Sound
65
Build
62
Value
73
Score
68
FIND IT ON:
Reverb logoSweetwater logoMusician's Friend logo
Add to Compare
Add to Compare
Side to side spec comparison >

Gibson ES-335 vs Sire Larry Carlton H7

Reasons to Get
Gibson ES-335 over Sire Larry Carlton H7

Country of Manufacturing
United States vs Indonesia
Built with higher quality standards
Pickups Brand
Gibson vs None
Pickups from a renown brand
Neck Thickness at 1st Fret
0.88'' (22.4mm) vs 0.9'' (22.9mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
1'' (25.4mm) vs 0.94'' (23.9mm)
More comfortable at higher frets for big hands
Nut Width
1.693'' (43mm) vs 1.575'' (40mm)
Less likely to mute strings by accident and more space for fingerstyle

Reasons to Get
Sire Larry Carlton H7 over Gibson ES-335

Decorative Top
Flame Maple vs None
Finished with beautiful natural wood patterns
Release Year
2020 vs 2019
From a more recent year
Neck Thickness at 1st Fret
0.9'' (22.9mm) vs 0.88'' (22.4mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.94'' (23.9mm) vs 1'' (25.4mm)
More comfortable at higher frets for small hands
Nut Width
1.575'' (40mm) vs 1.693'' (43mm)
Favors small hands, easier bar chords and other shapes
Value Score
73 vs 57
Better price/quality relationship

Other Key Differences
Gibson ES-335 vs Sire Larry Carlton H7

Bridge Pickup
Gibson Calibrated T-Type, Lead vs Larry Carlton Vintage Humbucker
Different Bridge Pickup
Neck Pickup
Gibson Calibrated T-Type, Rhythm vs Larry Carlton Vintage Humbucker
Different Neck Pickup
Body Wood
Maple vs Flame Maple
Different Body Wood
Fretboard Wood
Rosewood vs Ebony
Different Fretboard Wood
Nut Material
Ivory Tusq vs Bone
Different Nut Material

Shared Features
Gibson ES-335 vs Sire Larry Carlton H7

Neck Wood
Mahogany
Same Neck Wood
Headstock
3-3
Same Headstock
Strings
6
Same playing style
Body Type
Semi-Hollow
Lighter and allows more gain than a hollowbody
Switch Positions
3
Same pickups versatility
Volume Knobs
2
Same volume control
Tone Knobs
2
Same tone control
Pickups
HH
High output without hum
Number of Frets
22
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
24.75'' (628.7mm)
Same string tension and fret separation
Fretboard Radius
12'' (304.8mm)
Same fretboard comfortability
Pickups Power
Passive
Cleaner sound and no battery needed
Neck Profile Type
C
Comfortable neck that works for most people
Neck Joint
Set
Neck is glued to the body
Type of Frets
Medium Jumbo
You'll feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Nut
  • Expensive Wood

Common Weaknesses

  • Neck-Through Build
  • Pickup Alter Switch/Knob
  • Locking Tuners
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Gibson ES-335 is probably the better product overall with its final score of 72 compared to the Sire Larry Carlton H7's 68 score, although not by a lot.

The Gibson ES-335 wins when it comes to sound, build quality. On the other hand, the Sire Larry Carlton H7 has the upper hand when it comes to playability, value for the money.

If you got small hands, you'll probably feel that the Sire Larry Carlton H7 is easier to play.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Sire Larry Carlton H7 is the better choice.

The Sire Larry Carlton H7 meets 5 out of our 8 criteria items for beginner friendliness, while the Gibson ES-335 meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Gibson ES-335
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

New Player Friendliness

Sire Larry Carlton H7
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Gibson ES-335 Overview

  • From Gibson's 2019 Original Collection series
  • Made in United States
  • 6 strings
  • 24.75"'' scale
  • 12" Fretboard Radius
  • Maple and Poplar body
  • Mahogany neck
  • Rosewood fretboard
  • Bridge pickup: Gibson Calibrated T-Type, Lead (Humbucker/Passive)
  • Neck pickup: Gibson Calibrated T-Type, Rhythm (Humbucker/Passive)
  • 2 volume and 2 tone Bell knobs
  • 3-way Switch
  • ABR-1 Tune-O-Matic bridge
  • Rounded C Set neck
  • 22 Medium Jumbo frets
  • Vintage Deluxe w/ Keystone Buttons tuners
  • Weight between 7.95lbs (3.6kgs) and 8.45lbs (3.8kgs)
  • Compare Specs >

Sire Larry Carlton H7 Overview

  • From Sire's 2020 H7 series
  • Larry Carlton Signature
  • Made in Indonesia
  • 6 strings
  • 24.75"'' scale
  • 12" Fretboard Radius
  • Flame Maple top
  • Top: Flame Maple, Side & Back: Maple (Center Block: Maple) body
  • Mahogany neck
  • Ebony fretboard
  • Bridge pickup: Larry Carlton Vintage Humbucker (Humbucker/Passive)
  • Neck pickup: Larry Carlton Vintage Humbucker (Humbucker/Passive)
  • 2 volume and 2 tone Speed knobs
  • 3-way Switch
  • Sire Standard Tune-O-matic & Stop Tail Piece bridge
  • C-Shape Set neck
  • 22 Medium Jumbo frets
  • Sire Premium Diecasting Tuner tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Woods Used in the Gibson ES-335

Rosewood wood pattern used for guitar building
Rosewood
Maple wood pattern used for guitar building
Maple

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Woods Used in the Sire Larry Carlton H7

Ebony wood pattern used for guitar building
Ebony
Flame Maple wood pattern used for guitar building
Flame Maple

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

This wood has beautiful patterns only found in specific types of maple.

Winner: Sire Larry Carlton H7.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The Gibson ES-335 has pickups from a more specialized brand than the Sire Larry Carlton H7. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Jazz and similar genres.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Gibson ES-335.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

They both share the following switching options:

Gibson ES-335 and Sire Larry Carlton H7 pickups switch and push knobs diagram
Gibson ES-335 and Sire Larry Carlton H7's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Tie.

Final Sound Quality Scores

Gibson ES-335
Pickups 90
Sustain 75
Versatility 53
Tuning Stability 70
Sound 72
Sire Larry Carlton H7
Pickups 60
Sustain 75
Versatility 53
Tuning Stability 70
Sound 65

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Gibson ES-335 compares to the Sire Larry Carlton H7.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Gibson ES-335 is built in United States while the Sire Larry Carlton H7 is made in Indonesia.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Gibson ES-335

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Gibson ES-335 has a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

On the other hand, the Sire Larry Carlton H7 comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

Both come with regular tuners. The Gibson ES-335's are Vintage Deluxe w/ Keystone Buttons while the Sire Larry Carlton H7's are Sire Premium Diecasting Tuner

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Gibson ES-335
  • Made in United States
  • Expensive Wood
  • Ivory Tusq Nut
  • Top Brand Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Sire Larry Carlton H7
  • Expensive Wood
  • Bone Nut
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Gibson ES-335
Quality of materials 56
Features 55
Quality Control 100
Build Quality 70
Sire Larry Carlton H7
Quality of materials 60
Features 55
Quality Control 70
Build Quality 62

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Gibson ES-335 Nut Width
Gibson ES-335 Nut Width
Sire Larry Carlton H7 Nut Width
Sire Larry Carlton H7 Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Gibson ES-335 has the wider nut with 43mm (1.693'') vs 40mm (1.575''). This is a 3mm (0.118'') difference

This means that it will be more difficult to do bar chords on the Gibson ES-335, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Gibson ES-335 and Sire Larry Carlton H7's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 24.75".

This is the scale length that Gibson uses for most of its Les Paul guitars. It's a smaller scale than the typical Stratocaster's 25.5''. Short scale lengths like this make it easier to bend the strings, which is pretty important if you have a fixed bridge. They also have a shorter fret separation, which makes it easier to change position fast at the fretboard.

On the other hand, a shorter scale like this one will make fret buzz more likely, which can affect you if you want to use thicker string gauges.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Gibson ES-335 Neck Profile
Gibson ES-335's neck profile
Sire Larry Carlton H7 Neck Profile
Sire Larry Carlton H7's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Gibson ES-335 and the Sire Larry Carlton H7 have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Gibson ES-335 Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Gibson ES-335 and the Sire Larry Carlton H7 have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Gibson ES-335 favors large hands more than the Sire Larry Carlton H7.

Gibson ES-335:
Big Hands
Small Hands
Sire Larry Carlton H7:
Big Hands
Small Hands

Fret Size

Gibson ES-335 and Sire Larry Carlton H7 Frets Size
Both have a similar Medium Jumbo fret size

Both have a Medium Jumbo fret size. These are slightly shorter than full Jumbo frets, so you'll still feel the fretboard when pressing down the strings. However, they interfere less with your fretting hand than medium-size frets. This is a good size if you like easy-to-press frets, but would still like to feel a bit of the fretboard when playing.

Final Playability Scores

Gibson ES-335
Bending & Vibrato Ease 85
Chord Playability 65
Solo Playability 70
Playability 73
Sire Larry Carlton H7
Bending & Vibrato Ease 85
Chord Playability 75
Solo Playability 70
Playability 77

Specs Side-by-Side

Gibson ES-335 vs Sire Larry Carlton H7
General Gibson ES-335 Sire Larry Carlton H7
Brand: Gibson Sire
Year: 2019 2020
Configuration: HH HH
Strings: 6 6
Made in: United States Indonesia
Series: Original Collection H7
Colors: Black, Red, Sunburst Burst Sunburst, Red
Left-Handed Version: Yes No
Body
Type: Semi-Hollow Semi-Hollow
Body Material: Maple and Poplar Top: Flame Maple, Side & Back: Maple (Center Block: Maple)
Bridge: ABR-1 Tune-O-Matic Sire Standard Tune-O-matic & Stop Tail Piece
Neck
Neck Joint: Set Set
Tuners: Vintage Deluxe w/ Keystone Buttons Sire Premium Diecasting Tuner
Fretboard: Rosewood Ebony
Neck Material: Mahogany Mahogany
Decoration: Acrylic Dots Pearloid Square
Scale Size: 24.75" 24.75"
Shape: Rounded C C-Shape
Thickness: 1st Fret: 0.88'' (22.4mm) - 12th Fret: 1'' (25.4mm) 1st Fret: 0.9'' (22.9mm) - 12th Fret: 0.94'' (23.9mm)
Frets: 22 Medium Jumbo Nickel Silver 22 Medium Jumbo Nickel Silver
Fretboard Radius: 12" 12"
Nut: Ivory Tusq Bone
Nut Width: 43mm (1.693'') 40mm (1.575'')
Electronics
Bridge Pickup: Gibson Calibrated T-Type, Lead (Humbucker / Passive) Larry Carlton Vintage Humbucker (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Gibson Calibrated T-Type, Rhythm (Humbucker / Passive) Larry Carlton Vintage Humbucker (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Bell Speed
Pickup Mods: None None
Volume Controls: 2 2
Tone Controls: 2 2