Gibson Custom 1964 ES-335 Reissue vs Fender Ben Gibbard Mustang
Reasons to Get
Gibson Custom 1964 ES-335 Reissue over Fender Ben Gibbard Mustang
Reasons to Get
Fender Ben Gibbard Mustang over Gibson Custom 1964 ES-335 Reissue
Other Key Differences
Gibson Custom 1964 ES-335 Reissue vs Fender Ben Gibbard Mustang
Shared Features
Gibson Custom 1964 ES-335 Reissue vs Fender Ben Gibbard Mustang
Common Strengths
- High-Quality Nut
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Pickup Alter Switch/Knob
- Locking Tuners
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- 21:1 Tuner Ratio
- Active/Passive Preamp
Table of Contents
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Which One is Better Overall?
After going through our comparison algorithm, the results show that the Gibson Custom 1964 ES-335 Reissue is probably the better product overall with its final score of 73 compared to the Fender Ben Gibbard Mustang's 71 score, although not by a lot.
The Gibson Custom 1964 ES-335 Reissue wins when it comes to build quality. On the other hand, the Fender Ben Gibbard Mustang has the upper hand when it comes to playability, value for the money.
If you got small hands, none of these instruments will make a big difference when it comes to comfortability.
Which One is Better for Beginners?
If you're looking for your first guitar to learn how to play, the Fender Ben Gibbard Mustang is the better choice.
The Fender Ben Gibbard Mustang meets 7 out of our 8 criteria items for beginner friendliness, while the Gibson Custom 1964 ES-335 Reissue meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Gibson Custom 1964 ES-335 Reissue- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
New Player Friendliness
Fender Ben Gibbard Mustang- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Narrow nut
- Short scale
- Comfortable neck
- Locking tuners
Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.
Gibson Custom 1964 ES-335 Reissue Overview
- From Gibson Custom's 2022 Historic Collection series
- Made in United States
- 6 strings
- 24.75"'' scale
- 12" Fretboard Radius
- 3-Ply Maple/Poplar/Maple body
- Mahogany neck
- Indian Rosewood fretboard
- Bridge pickup: Custombucker Alnico III (Unpotted) (Humbucker/Passive)
- Neck pickup: Custombucker Alnico III (Unpotted) (Humbucker/Passive)
- 2 volume and 2 tone Bell knobs
- 3-way Switch
- Lightweight Aluminum Stop Bar bridge
- SlimTaper 60s C Set neck
- 22 Medium Jumbo frets
- Kluson Single Line, Double Ring tuners
- Weight between 7.7lbs (3.5kgs) and 7.8lbs (3.5kgs)
- Compare Specs >
Fender Ben Gibbard Mustang Overview
- From Fender's 2021 Artist series
- Ben Gibbard Signature
- Made in Mexico
- 6 strings
- 24"'' scale
- 9.5" Fretboard Radius
- Chambered Ash body
- Maple neck
- Maple fretboard
- Bridge pickup: Fender Vintage-Style Single-Coil Mustang (Single Coil/Passive)
- Neck pickup: Fender Vintage-Style Single-Coil Mustang (Single Coil/Passive)
- 1 volume and 0 tone Bell knobs
- 3-way Switch
- 6-Saddle Vintage-Style Mustang Tremolo bridge
- Modern C Bolt-On neck
- 22 Medium Jumbo frets
- Vintage-Style with Fender Logo tuners
- Weight between 7.15lbs (3.2kgs) and 7.4lbs (3.4kgs)
- Compare Specs >
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Woods Used in the Gibson Custom 1964 ES-335 Reissue
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Woods Used in the Fender Ben Gibbard Mustang
Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.
Winner: Gibson Custom 1964 ES-335 Reissue.
Pickup Configuration
The Gibson Custom 1964 ES-335 Reissue has an HH configuration while the Fender Ben Gibbard Mustang has SS pickups.
Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
On the other hand, SS is the classic Telecaster configuration. It's used mainly for playing clean or with low-gain distortion, and it's very popular for the country genre because of their brightness. It doesn't give you as much versatility as a Strat SSS configuration, but you might like the cleaner look of a guitar body with fewer pickups.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Fender Ben Gibbard Mustang has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Fender Ben Gibbard Mustang.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender Ben Gibbard Mustang.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Gibson Custom 1964 ES-335 Reissue compares to the Fender Ben Gibbard Mustang.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Gibson Custom 1964 ES-335 Reissue is built in United States while the Fender Ben Gibbard Mustang is made in Mexico.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.
Winner: Gibson Custom 1964 ES-335 Reissue
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Gibson Custom 1964 ES-335 Reissue has a Nylon nut. It used to be one of the highest quality materials for nuts (and still is), but it's rare to find nowadays because it's hard to work with. It's a very resistant material with very low friction, so it will keep the guitar in tune and will last for a long time
On the other hand, the Fender Ben Gibbard Mustang comes with a Synthetic Bone nut. Bone is the best natural material for guitar nuts. However, its tonal properties can be inconsistent. That's the problem that synthetic bone fixes. This is much better than using a plastic nut because the nut is more slippery—which helps with tuning stability—, and it gives your open strings rich harmonics.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Gibson Custom 1964 ES-335 Reissue's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the Fender Ben Gibbard Mustang's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. The Gibson Custom 1964 ES-335 Reissue's are Kluson Single Line, Double Ring while the Fender Ben Gibbard Mustang's are Vintage-Style with Fender Logo
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Gibson Custom 1964 ES-335 Reissue has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
On the other hand, the Fender Ben Gibbard Mustang comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Fender Ben Gibbard Mustang.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Gibson Custom 1964 ES-335 Reissue
- Made in United States
- Expensive Wood
- Nylon Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender Ben Gibbard Mustang
- Expensive Wood
- Synthetic Bone Nut
- Top Brand Pickups
- Tremolo
- Strap Lock
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Gibson Custom 1964 ES-335 Reissue has the wider nut with 42.9mm (1.688'') vs 42mm (1.654''). This is a 0.9mm (0.034'') difference
This means that it will be more difficult to do bar chords on the Gibson Custom 1964 ES-335 Reissue, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Gibson Custom 1964 ES-335 Reissue has the longest scale: 24.75". The Fender Ben Gibbard Mustang is only 24" long. This is a 0.75'' (19.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Gibson Custom 1964 ES-335 Reissue and the Fender Ben Gibbard Mustang have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Fender Ben Gibbard Mustang's fingerboard radius is smaller, which means it's more curved than the Gibson Custom 1964 ES-335 Reissue's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Gibson Custom 1964 ES-335 Reissue.
Hand Size Comfortability
Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .
Gibson Custom 1964 ES-335 Reissue:
Fender Ben Gibbard Mustang:
Fret Size
Both have a Medium Jumbo fret size. These are slightly shorter than full Jumbo frets, so you'll still feel the fretboard when pressing down the strings. However, they interfere less with your fretting hand than medium-size frets. This is a good size if you like easy-to-press frets, but would still like to feel a bit of the fretboard when playing.
