Swap
Swap
Fender Custom '62 Jazzmaster Journeyman Relic
Harley Benton TE-53KR
VS
Playability
67
Sound
72
Build
70
Value
55
Score
70
FIND IT ON:
Reverb logoSweetwater logo
Playability
72
Sound
72
Build
57
Value
77
Score
67
FIND IT ON:
Thomann logoReverb logo
Add to Compare
Add to Compare
Side to side spec comparison >

Fender Custom '62 Jazzmaster Journeyman Relic vs Harley Benton TE-53KR

Reasons to Get
Fender Custom '62 Jazzmaster Journeyman Relic over Harley Benton TE-53KR

Country of Manufacturing
United States vs China
Built with higher quality standards
Pickups
P90P90 vs SH
Vintage tone with decent versatility
Nut Width
1.65'' (41.9mm) vs 1.654'' (42mm)
Favors small hands, easier bar chords and other shapes
Paint Finish
Aged vs Poly
Paint has been artificially aged
Bridge
Tremolo vs Fixed
Simple vibratos without too much maintenance
Fretboard Radius
9.5'' (241.3mm) vs 12'' (304.8mm)
More curved fretboard helpful to play chords without muting strings

Reasons to Get
Harley Benton TE-53KR over Fender Custom '62 Jazzmaster Journeyman Relic

Release Year
2023 vs 2018
From a more recent year
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Pickups
SH vs P90P90
Very bright bridge tone and a very warm neck pickup
Nut Width
1.654'' (42mm) vs 1.65'' (41.9mm)
Less likely to mute strings by accident and more space for fingerstyle
Paint Finish
Poly vs Aged
Resistant paint that ages well
Bridge
Fixed vs Tremolo
Good sustain and needs no set-up
Fretboard Radius
12'' (304.8mm) vs 9.5'' (241.3mm)
Flatter fretboard makes it easier to play single notes and bend
Value Score
77 vs 55
Better price/quality relationship

Other Key Differences
Fender Custom '62 Jazzmaster Journeyman Relic vs Harley Benton TE-53KR

Bridge Pickup
Fender Custom Shop Hand-Wound Jazzmaster vs Tesla Opus-TE Alnico-5
Different Bridge Pickup
Neck Pickup
Fender Custom Shop Hand-Wound Jazzmaster vs Tesla Opus-4 Alnico-5
Different Neck Pickup
Body Wood
Alder vs Ash
Different Body Wood
Neck Wood
Maple vs Roasted Maple
Different Neck Wood
Fretboard Wood
Rosewood vs Roasted Maple
Different Fretboard Wood

Shared Features
Fender Custom '62 Jazzmaster Journeyman Relic vs Harley Benton TE-53KR

Headstock
6
Same Headstock
Nut Material
Bone
Same Nut Material
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Number of Frets
21
Same maximum octave
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Pickups Power
Passive
Cleaner sound and no battery needed
Neck Profile Type
C
Comfortable neck that works for most people
Neck Joint
Bolt-On
Allows you to detach and swap the neck
Type of Frets
Medium vs Medium Jumbo
You'll feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Nut
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Neck-Through Build
  • Pickup Alter Switch/Knob
  • Weight Relief
  • Locking Tuners
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

Fender Custom '62 Jazzmaster Journeyman Relic Prices

SET PRICE ALERT

Harley Benton TE-53KR Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Fender Custom '62 Jazzmaster Journeyman Relic is probably the better product overall with its final score of 70 compared to the Harley Benton TE-53KR's 67 score, although not by a lot.

The Fender Custom '62 Jazzmaster Journeyman Relic wins when it comes to build quality. On the other hand, the Harley Benton TE-53KR has the upper hand when it comes to playability, value for the money.

If you got small hands, you'll probably feel that the Harley Benton TE-53KR is easier to play.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Fender Custom '62 Jazzmaster Journeyman Relic is the better choice.

The Fender Custom '62 Jazzmaster Journeyman Relic meets 6 out of our 8 criteria items for beginner friendliness, while the Harley Benton TE-53KR meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Fender Custom '62 Jazzmaster Journeyman Relic
  • Comfortable shape
  • Easy-to-use bridge
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale
  • Locking tuners

New Player Friendliness

Harley Benton TE-53KR
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Fender Custom '62 Jazzmaster Journeyman Relic Overview

  • From Fender Custom's 2018 Time Machine series
  • Made in United States
  • 6 strings
  • 25.5"'' scale
  • 9.5" Fretboard Radius
  • 2-Piece Select Alder body
  • Rift Sawn Maple neck
  • Round-Laminated Rosewood fretboard
  • Bridge pickup: Fender Custom Shop Hand-Wound Jazzmaster (Single Coil/Passive)
  • 1 volume and 1 tone Bell knobs
  • 3-way Switch
  • RSD Jaguar/Jazzmaster bridge
  • 1962 Jazzmaster Bolt-On neck
  • 21 Medium frets
  • Vintage Style tuners
  • Compare Specs >

Harley Benton TE-53KR Overview

  • From Harley Benton's 2023 Tribute series
  • Made in China
  • 6 strings
  • 25.5"'' scale
  • 12" Fretboard Radius
  • Ash body
  • Caramelized Canadian Maple neck
  • Caramelized Canadian Maple fretboard
  • Bridge pickup: Tesla Opus-TE Alnico-5 (Single Coil/Passive)
  • Neck pickup: Tesla Opus-4 Alnico-5 (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Gold-plated BT101 bridge
  • C Bolt-On neck
  • 21 Medium Jumbo frets
  • Kluson-style tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Fender Custom '62 Jazzmaster Journeyman Relic

Maple wood pattern used for guitar building
Maple
Rosewood wood pattern used for guitar building
Rosewood
Alder wood pattern used for guitar building
Alder

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Woods Used in the Harley Benton TE-53KR

Roasted Maple wood pattern used for guitar building
Roasted Maple
Ash wood pattern used for guitar building
Ash

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.

Winner: Tie.

Pickup Configuration

The Fender Custom '62 Jazzmaster Journeyman Relic has an P90P90 configuration while the Harley Benton TE-53KR has SH pickups.

P90P90 gives you two P90s for a crunchy vintage tone. The tone sits somewhere in the middle between typical single-coils and humbuckers. They also produce less hum than single-coils, but they don't cancel it completely like humbuckers.

On the other hand, SH is a more versatile version of the classic telecaster (SS) configuration. The bridge pickup usually produces a bright and twangy tone, while the neck Humbucker gives you the warmer tone you'll need for more Jazzy/Bluish solos and chords.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the Fender Custom '62 Jazzmaster Journeyman Relic has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Fender Custom '62 Jazzmaster Journeyman Relic.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

Fender Custom '62 Jazzmaster Journeyman Relic pickups switch and push knobs diagram
Fender Custom '62 Jazzmaster Journeyman Relic's switch options
Harley Benton TE-53KR pickups switch and push knobs diagram
Harley Benton TE-53KR's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Fender Custom '62 Jazzmaster Journeyman Relic.

Final Sound Quality Scores

Fender Custom '62 Jazzmaster Journeyman Relic
Pickups 100
Sustain 60
Versatility 64
Tuning Stability 65
Sound 72
Harley Benton TE-53KR
Pickups 90
Sustain 75
Versatility 54
Tuning Stability 70
Sound 72

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Fender Custom '62 Jazzmaster Journeyman Relic compares to the Harley Benton TE-53KR.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Fender Custom '62 Jazzmaster Journeyman Relic is built in United States while the Harley Benton TE-53KR is made in China.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Winner: Fender Custom '62 Jazzmaster Journeyman Relic

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Bone nuts. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Fender Custom '62 Jazzmaster Journeyman Relic's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

On the other hand, the Harley Benton TE-53KR's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

Both come with regular tuners. The Fender Custom '62 Jazzmaster Journeyman Relic's are Vintage Style while the Harley Benton TE-53KR's are Kluson-style

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Fender Custom '62 Jazzmaster Journeyman Relic
  • Made in United States
  • Expensive Wood
  • Bone Nut
  • Top Brand Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Harley Benton TE-53KR
  • Expensive Wood
  • Bone Nut
  • Top Brand Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Fender Custom '62 Jazzmaster Journeyman Relic
Quality of materials 56
Features 55
Quality Control 100
Build Quality 70
Harley Benton TE-53KR
Quality of materials 66
Features 50
Quality Control 55
Build Quality 57

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Fender Custom '62 Jazzmaster Journeyman Relic Nut Width
Fender Custom '62 Jazzmaster Journeyman Relic Nut Width
Harley Benton TE-53KR Nut Width
Harley Benton TE-53KR Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Harley Benton TE-53KR has the wider nut with 42mm (1.654'') vs 41.9mm (1.65''). This is a 0.1mm (0.004'') difference

This means that it will be more difficult to do bar chords on the Harley Benton TE-53KR, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Fender Custom '62 Jazzmaster Journeyman Relic and Harley Benton TE-53KR's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Fender Custom '62 Jazzmaster Journeyman Relic Neck Profile
Fender Custom '62 Jazzmaster Journeyman Relic's neck profile
Harley Benton TE-53KR Neck Profile
Harley Benton TE-53KR's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Fender Custom '62 Jazzmaster Journeyman Relic and the Harley Benton TE-53KR have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Fender Custom '62 Jazzmaster Journeyman Relic Fingerboard Radius
Fender Custom '62 Jazzmaster Journeyman Relic's Fingerboard radius
Harley Benton TE-53KR Fingerboard Radius
Harley Benton TE-53KR's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Fender Custom '62 Jazzmaster Journeyman Relic's fingerboard radius is smaller, which means it's more curved than the Harley Benton TE-53KR's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Harley Benton TE-53KR.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender Custom '62 Jazzmaster Journeyman Relic favors large hands more than the Harley Benton TE-53KR. But it's still more comfortable for people with small hands, as you can see in the score meter below.

Fender Custom '62 Jazzmaster Journeyman Relic:
Big Hands
Small Hands
Harley Benton TE-53KR:
Big Hands
Small Hands

Fret Size

Fender Custom '62 Jazzmaster Journeyman Relic Frets Size
Fender Custom '62 Jazzmaster Journeyman Relic's Frets Size
Harley Benton TE-53KR Frets Size
Harley Benton TE-53KR's Frets Size

The Harley Benton TE-53KR has Medium Jumbo frets, which should be taller than the Fender Custom '62 Jazzmaster Journeyman Relic's Medium frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Fender Custom '62 Jazzmaster Journeyman Relic
Bending & Vibrato Ease 60
Chord Playability 80
Solo Playability 60
Playability 67
Harley Benton TE-53KR
Bending & Vibrato Ease 75
Chord Playability 70
Solo Playability 70
Playability 72

Specs Side-by-Side

Fender Custom '62 Jazzmaster Journeyman Relic vs Harley Benton TE-53KR
General Fender Custom '62 Jazzmaster Journeyman Relic Harley Benton TE-53KR
Brand: Fender Custom Harley Benton
Year: 2018 2023
Configuration: P90P90 SH
Strings: 6 6
Made in: United States China
Series: Time Machine Tribute
Colors: Sunburst, Blue, Red Yellow
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: 2-Piece Select Alder Ash
Bridge: RSD Jaguar/Jazzmaster Gold-plated BT101
Neck
Neck Joint: Bolt-On Bolt-On
Tuners: Vintage Style Kluson-style
Fretboard: Round-Laminated Rosewood Caramelized Canadian Maple
Neck Material: Rift Sawn Maple Caramelized Canadian Maple
Decoration: Vintage Clay Dot Black dot fretboard
Scale Size: 25.5" 25.5"
Shape: 1962 Jazzmaster C
Frets: 21 Medium Nickel Silver 21 Medium Jumbo Nickel Silver
Fretboard Radius: 9.5" 12"
Nut: Bone Bone
Nut Width: 41.9mm (1.65'') 42mm (1.654'')
Electronics
Bridge Pickup: Fender Custom Shop Hand-Wound Jazzmaster (Single Coil / Passive) Tesla Opus-TE Alnico-5 (Single Coil / Passive)
Middle Pickup:
Neck Pickup: Fender Custom Shop Hand-Wound Jazzmaster (Single Coil / Passive) Tesla Opus-4 Alnico-5 (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Bell Dome
Pickup Mods: None None
Volume Controls: 1 1
Tone Controls: 1 1