Swap
Swap
Fender Aerodyne Special Stratocaster HSS
Schecter Synyster Custom
VS
Playability
67
Sound
77
Build
65
Value
75
Score
70
FIND IT ON:
Reverb logoFender logo
Playability
77
Sound
81
Build
67
Value
75
Score
75
FIND IT ON:
Sweetwater logoAmazon logoMusician's Friend logoReverb logo
Add to Compare
Add to Compare
Side to side spec comparison >

Fender Aerodyne Special Stratocaster HSS vs Schecter Synyster Custom

Reasons to Get
Fender Aerodyne Special Stratocaster HSS over Schecter Synyster Custom

Country of Manufacturing
Japan vs South Korea
Built with higher quality standards
Release Year
2022 vs 2011
From a more recent year
Type of Frets
Medium Jumbo vs XL Jumbo
You'll feel the fretboard when pressing down the strings
Neck Joint
Bolt-On vs Set
Allows you to detach and swap the neck
Switch Positions
5 vs 3
More tone options
Tone Knobs
2 vs 1
More tone control
Pickups
HSS vs HH
High output with beautiful cleans and tone versatility
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.82'' (20.8mm) vs 0.748'' (19mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.87'' (22.1mm) vs 0.787'' (20mm)
More comfortable at higher frets for big hands
Nut Width
1.693'' (43mm) vs 1.625'' (41.3mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Tremolo vs Floyd Rose
Simple vibratos without too much maintenance
Fretboard Radius
12'' (304.8mm) vs 16'' (406.4mm)
Easier to play chords without muting strings

Reasons to Get
Schecter Synyster Custom over Fender Aerodyne Special Stratocaster HSS

Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
XL Jumbo vs Medium Jumbo
You won't feel the fretboard when pressing down the strings
Pickup Mods
Coil Split vs None
Splits humbuckers into single coil pickups
Pickups
HH vs HSS
High output without hum
Number of Frets
24 vs 22
Allows to reach higher notes
Neck Thickness at 1st Fret
0.748'' (19mm) vs 0.82'' (20.8mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.787'' (20mm) vs 0.87'' (22.1mm)
More comfortable at higher frets for small hands
Nut Width
1.625'' (41.3mm) vs 1.693'' (43mm)
Favors small hands, easier bar chords and other shapes
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Bridge
Floyd Rose vs Tremolo
Allows intense vibratos and techniques like Dive Bombs
Fretboard Radius
16'' (406.4mm) vs 12'' (304.8mm)
Flatter fretboard makes it easier to play single notes and bend

Other Key Differences
Fender Aerodyne Special Stratocaster HSS vs Schecter Synyster Custom

Bridge Pickup
Fender Aerodyne Special Humbucking vs Schecter USA Synyster Gates Signature Humbucker
Different Bridge Pickup
Neck Pickup
Fender Aerodyne Special Single-Coil Stratocaster vs Schecter USA Synyster Gates Signature Humbucker
Different Neck Pickup
Body Wood
Basswood vs Mahogany
Different Body Wood
Neck Wood
Maple vs Mahogany
Different Neck Wood
Fretboard Wood
Maple vs Ebony
Different Fretboard Wood
Headstock
6 vs 3-3
Different Headstock
Nut Material
Synthetic Bone vs Locking
Different Nut Material

Shared Features
Fender Aerodyne Special Stratocaster HSS vs Schecter Synyster Custom

Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Paint Finish
Poly
Resistant paint that ages well
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Pickups Power
Passive
Cleaner sound and no battery needed
Neck Profile Type
C
Comfortable neck that works for most people

Common Strengths

  • High-Quality Nut
  • Top Pickup Brand

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better for Beginners?

The Fender Aerodyne Special Stratocaster HSS meets 5 out of our 8 criteria items for beginner friendliness, while the Schecter Synyster Custom meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Fender Aerodyne Special Stratocaster HSS
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale

New Player Friendliness

Schecter Synyster Custom
  • Comfortable shape
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Fender Aerodyne Special Stratocaster HSS

Maple wood pattern used for guitar building
Maple
Basswood wood pattern used for guitar building
Basswood

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

Woods Used in the Schecter Synyster Custom

Mahogany wood pattern used for guitar building
Mahogany
Ebony wood pattern used for guitar building
Ebony

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Winner: Schecter Synyster Custom.

Pickup Configuration

The Fender Aerodyne Special Stratocaster HSS has an HSS configuration while the Schecter Synyster Custom has HH pickups.

HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the Fender Aerodyne Special Stratocaster HSS has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Fender Aerodyne Special Stratocaster HSS.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Fender Aerodyne Special Stratocaster HSS gives you 5 switch options while the Schecter Synyster Custom gives you 3. This means that the Fender Aerodyne Special Stratocaster HSS gives you more options to find the right pickup combination for the type of sound you want to achieve

Only the Schecter Synyster Custom comes with some kind of pickup modification: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

Fender Aerodyne Special Stratocaster HSS pickups switch selector and push knobs diagram
Fender Aerodyne Special Stratocaster HSS's switch options
Schecter Synyster Custom pickups switch and push knobs diagram
Schecter Synyster Custom's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Schecter Synyster Custom.

Final Sound Quality Scores

Fender Aerodyne Special Stratocaster HSS
Pickups 90
Sustain 70
Versatility 72
Tuning Stability 75
Sound 77
Schecter Synyster Custom
Pickups 85
Sustain 80
Versatility 74
Tuning Stability 85
Sound 81

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Fender Aerodyne Special Stratocaster HSS compares to the Schecter Synyster Custom.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Fender Aerodyne Special Stratocaster HSS is built in Japan while the Schecter Synyster Custom is made in South Korea.

Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Winner: Fender Aerodyne Special Stratocaster HSS

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Fender Aerodyne Special Stratocaster HSS has a Synthetic Bone nut. Bone is the best natural material for guitar nuts. However, its tonal properties can be inconsistent. That's the problem that synthetic bone fixes. This is much better than using a plastic nut because the nut is more slippery—which helps with tuning stability—, and it gives your open strings rich harmonics.

On the other hand, the Schecter Synyster Custom comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Fender Aerodyne Special Stratocaster HSS's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

On the other hand, the Schecter Synyster Custom's is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Schecter Synyster Custom.

Tuners

The Fender Aerodyne Special Stratocaster HSS has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Nevertheless, the Schecter Synyster Custom has a locking nut, so it should have even better tune stability and doesn't need locking tuners.

Winner: Fender Aerodyne Special Stratocaster HSS.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Fender Aerodyne Special Stratocaster HSS has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

On the other hand, the Schecter Synyster Custom comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Fender Aerodyne Special Stratocaster HSS.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Fender Aerodyne Special Stratocaster HSS
  • Locking Tuners
  • Made in Japan
  • Synthetic Bone Nut
  • Top Brand Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Expensive Woods
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter Synyster Custom
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Coil Split Pickups
  • Luminescent Inlay
  • Tremolo
  • Retainer Bar
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in South Korea
  • No Neck-Through Build
  • No Weight Relief
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Fender Aerodyne Special Stratocaster HSS
Quality of materials 51
Features 65
Quality Control 80
Build Quality 65
Schecter Synyster Custom
Quality of materials 51
Features 75
Quality Control 75
Build Quality 67

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Fender Aerodyne Special Stratocaster HSS Nut Width
Fender Aerodyne Special Stratocaster HSS Nut Width
Schecter Synyster Custom Nut Width
Schecter Synyster Custom Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Fender Aerodyne Special Stratocaster HSS has the wider nut with 43mm (1.693'') vs 41.3mm (1.625''). This is a 1.7mm (0.068'') difference

This means that it will be more difficult to do bar chords on the Fender Aerodyne Special Stratocaster HSS, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Fender Aerodyne Special Stratocaster HSS and Schecter Synyster Custom's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Fender Aerodyne Special Stratocaster HSS Neck Profile
Fender Aerodyne Special Stratocaster HSS's neck profile
Schecter Synyster Custom Neck Profile
Schecter Synyster Custom's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Fender Aerodyne Special Stratocaster HSS and the Schecter Synyster Custom have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Fender Aerodyne Special Stratocaster HSS Fingerboard Radius
Fender Aerodyne Special Stratocaster HSS's Fingerboard radius
Schecter Synyster Custom Fingerboard Radius
Schecter Synyster Custom's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Fender Aerodyne Special Stratocaster HSS's fingerboard radius is smaller, which means it's more curved than the Schecter Synyster Custom's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter Synyster Custom.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender Aerodyne Special Stratocaster HSS favors large hands more than the Schecter Synyster Custom. But it's still more comfortable for people with small hands, as you can see in the score meter below.

Fender Aerodyne Special Stratocaster HSS:
Big Hands
Small Hands
Schecter Synyster Custom:
Big Hands
Small Hands

Fret Size

Fender Aerodyne Special Stratocaster HSS Frets Size
Fender Aerodyne Special Stratocaster HSS's Frets Size
Schecter Synyster Custom Frets Size
Schecter Synyster Custom's Frets Size

The Schecter Synyster Custom has XL Jumbo frets, which should be taller than the Fender Aerodyne Special Stratocaster HSS's Medium Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Fender Aerodyne Special Stratocaster HSS
Bending & Vibrato Ease 70
Chord Playability 60
Solo Playability 70
Playability 67
Schecter Synyster Custom
Bending & Vibrato Ease 80
Chord Playability 60
Solo Playability 90
Playability 77

Specs Side-by-Side

Fender Aerodyne Special Stratocaster HSS vs Schecter Synyster Custom
General Fender Aerodyne Special Stratocaster HSS Schecter Synyster Custom
Brand: Fender Schecter
Year: 2022 2011
Configuration: HSS HH
Strings: 6 6
Made in: Japan South Korea
Series: Aerodyne Artist
Colors: Green, Gray, Red Burst Black Patterns
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Basswood Mahogany
Bridge: Babicz Z-Series FCH-2 Point Trem Floyd Rose 1500 Series
Neck
Neck Joint: Bolt-On Set
Tuners: Deluxe Cast/Sealed Locking (all short posts) Grover Rotomatic 18:1
Fretboard: Maple Ebony
Neck Material: Maple Mahogany 3-pc w/ Carbon Fiber Reinforcement Rods
Decoration: Black Pearloid Dots Pearloid Syn w/Death Bat at 12th Fret
Scale Size: 25.5" 25.5"
Shape: Modern C Ultra Thin C
Thickness: 1st Fret: 0.82'' (20.8mm) - 12th Fret: 0.87'' (22.1mm) 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm)
Frets: 22 Medium Jumbo Nickel Silver 24 XL Jumbo Nickel Silver
Fretboard Radius: 12" 16"
Nut: Synthetic Bone Locking
Nut Width: 43mm (1.693'') 41.3mm (1.625'')
Electronics
Bridge Pickup: Fender Aerodyne Special Humbucking (Humbucker / Passive) Schecter USA Synyster Gates Signature Humbucker (Humbucker / Passive)
Middle Pickup: Fender Aerodyne Special Single-Coil Stratocaster (Single Coil / Passive)
Neck Pickup: Fender Aerodyne Special Single-Coil Stratocaster (Single Coil / Passive) Schecter USA Synyster Gates Signature Humbucker (Humbucker / Passive)
Switch: 5 Way 3 Way
Knobs: Bell Dome
Pickup Mods: None Coil Split
Volume Controls: 1 1
Tone Controls: 2 1