Swap
Swap
ESP LTD XJ-1 HT
PRS DW CE 24 Floyd
VS
Playability
75
Sound
74
Build
72
Value
74
Score
74
FIND IT ON:
Sweetwater logoReverb logo
Playability
75
Sound
81
Build
70
Value
65
Score
75
FIND IT ON:
Reverb logoSweetwater logoMusician's Friend logo
Add to Compare
Add to Compare
Side to side spec comparison >

LTD XJ-1 HT vs PRS DW CE 24 Floyd

Reasons to Get
LTD XJ-1 HT over PRS DW CE 24 Floyd

Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Release Year
2024 vs 2020
From a more recent year
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
XL Jumbo vs Medium Jumbo
You won't feel the fretboard when pressing down the strings
Neck Profile
Thin U vs Dustie Waring
Comfortable neck with more grip
Pickup Mods
Multi-Voicing vs None
Changes the voice (tones or gain) of the pickups
Pickups
H vs HH
Hum-free with more right hand freedom and sustain
Nut Width
1.654'' (42mm) vs 1.656'' (42.1mm)
Favors small hands, easier bar chords and other shapes
Bridge
Fixed vs Floyd Rose
Good sustain and needs no set-up
Scale Length
25.5'' (647.7mm) vs 25'' (635mm)
Lower action and brighter natural tone
Fretboard Radius
13.78'' (350mm) vs 10'' (254mm)
Flatter fretboard makes it easier to play single notes and bend
Pickups Power
Active vs Passive
More output
Value Score
74 vs 65
Better price/quality relationship

Reasons to Get
PRS DW CE 24 Floyd over ESP LTD XJ-1 HT

Country of Manufacturing
United States vs South Korea
Built with higher quality standards
Decorative Top
Maple vs None
Finished with beautiful natural wood patterns
Type of Frets
Medium Jumbo vs XL Jumbo
You'll feel the fretboard when pressing down the strings
Neck Profile
Dustie Waring vs Thin U
Comfortable neck that works for most people
Nut Material
Locking vs Plastic
Best tuning stability for intense tremolo usage
Switch Positions
5 vs 0
More tone options
Tone Knobs
1 vs 0
More tone control
Pickups
HH vs H
High output without hum
Number of Frets
24 vs 22
Allows to reach higher notes
Nut Width
1.656'' (42.1mm) vs 1.654'' (42mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Floyd Rose vs Fixed
Allows intense vibratos and techniques like Dive Bombs
Scale Length
25'' (635mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
10'' (254mm) vs 13.78'' (350mm)
More curved fretboard helpful to play chords without muting strings
Pickups Power
Passive vs Active
Cleaner sound and no battery needed

Other Key Differences
LTD XJ-1 HT vs PRS DW CE 24 Floyd

Bridge Pickup
Fishman Fluence Open Core Classic Humbucker Black *(Pull Volume for Voice 3) vs PRS Mojotone Tomahawk Gen 2
Different Bridge Pickup
Body Wood
Ash vs Mahogany
Different Body Wood
Neck Wood
Roasted Maple vs Maple
Different Neck Wood
Fretboard Wood
Ebony vs Maple
Different Fretboard Wood
Headstock
R6 vs 3-3
Different Headstock
Nut Material
Plastic vs Locking
Different Nut Material

Shared Features
LTD XJ-1 HT vs PRS DW CE 24 Floyd

Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Paint Finish
Poly
Resistant paint that ages well
Neck Joint
Bolt-On
Allows you to detach and swap the neck

Common Strengths

  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Neck-Through Build
  • Weight Relief
  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the PRS DW CE 24 Floyd is probably the better product overall with its final score of 75 compared to the ESP LTD XJ-1 HT's 74 score, although not by a lot.

The PRS DW CE 24 Floyd wins when it comes to sound. On the other hand, the ESP LTD XJ-1 HT has the upper hand when it comes to build quality, value for the money.

If you got small hands, you'll probably feel more comfortable playing the PRS DW CE 24 Floyd.

Which One is Better for Beginners?

Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

ESP LTD XJ-1 HT
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Short scale

New Player Friendliness

PRS DW CE 24 Floyd
  • Comfortable shape
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Easy-to-use bridge

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

ESP LTD XJ-1 HT Overview

  • From ESP LTD's 2024 XJ series
  • Made in South Korea
  • 6 strings
  • 25.5"'' scale
  • 13.78" Fretboard Radius
  • Swamp Ash body
  • 3Pc Roasted Maple neck
  • Macassar Ebony fretboard
  • Bridge pickup: Fishman Fluence Open Core Classic Humbucker Black *(Pull Volume for Voice 3) (Humbucker/Active)
  • 1 volume and 0 tone Dome knobs
  • Hipshot w/ String Thru bridge
  • Thin U Bolt-On neck
  • 22 XL Jumbo Stainless Steel frets
  • LTD Locking tuners
  • Compare Specs >

PRS DW CE 24 Floyd Overview

  • From PRS's 2020 Bolt-On series
  • Dustie Waring Signature
  • Made in United States
  • 6 strings
  • 25"'' scale
  • 10" Fretboard Radius
  • Maple top
  • Mahogany body
  • Maple neck
  • Maple fretboard
  • Bridge pickup: PRS Mojotone Tomahawk Gen 2 (Humbucker/Passive)
  • Neck pickup: PRS Mojotone Tomahawk Gen 2 (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 5-way Switch
  • Floyd Rose 1000 Tremolo w/ Locking Nut bridge
  • Dustie Waring Bolt-On neck
  • 24 Medium Jumbo frets
  • PRS Low Mass Locking tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the ESP LTD XJ-1 HT

Roasted Maple wood pattern used for guitar building
Roasted Maple
Ebony wood pattern used for guitar building
Ebony
Ash wood pattern used for guitar building
Ash

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.

Woods Used in the PRS DW CE 24 Floyd

Maple wood pattern used for guitar building
Maple
Mahogany wood pattern used for guitar building
Mahogany

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Winner: ESP LTD XJ-1 HT.

Pickup Configuration

The ESP LTD XJ-1 HT has an H configuration while the PRS DW CE 24 Floyd has HH pickups.

A single H pickup gives you the advantage of having a little longer sustain (all other things being equal) because there will be less magnetic fields from other pickups affecting the strings' vibration. However, they also give you the least versatility because you won't have other pickups at different distances from the bridge to create different tones. A single humbucking pickup is used for noiseless high output, which is used mainly for Hard Rock genres.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the ESP LTD XJ-1 HT has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

The ESP LTD XJ-1 HT's pickups are Active while the PRS DW CE 24 Floyd's are Passive.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: ESP LTD XJ-1 HT.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The PRS DW CE 24 Floyd gives you 5 switch options while the ESP LTD XJ-1 HT gives you 0. This means that the PRS DW CE 24 Floyd gives you more options to find the right pickup combination for the type of sound you want to achieve

Only the ESP LTD XJ-1 HT comes with some kind of pickup modification: Multi-Voicing.

Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.

The ESP LTD XJ-1 HT doesn't come with pickup switching options.

PRS DW CE 24 Floyd pickups switch selector and push knobs diagram
PRS DW CE 24 Floyd's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: PRS DW CE 24 Floyd.

Final Sound Quality Scores

ESP LTD XJ-1 HT
Pickups 90
Sustain 85
Versatility 47
Tuning Stability 75
Sound 74
PRS DW CE 24 Floyd
Pickups 85
Sustain 70
Versatility 72
Tuning Stability 95
Sound 81

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the ESP LTD XJ-1 HT compares to the PRS DW CE 24 Floyd.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The ESP LTD XJ-1 HT is built in South Korea while the PRS DW CE 24 Floyd is made in United States.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Winner: PRS DW CE 24 Floyd

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The ESP LTD XJ-1 HT has a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

On the other hand, the PRS DW CE 24 Floyd comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

Winner: PRS DW CE 24 Floyd.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the ESP LTD XJ-1 HT is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: ESP LTD XJ-1 HT.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The ESP LTD XJ-1 HT's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

On the other hand, the PRS DW CE 24 Floyd's is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: PRS DW CE 24 Floyd.

Tuners

They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
ESP LTD XJ-1 HT
  • Stainless Steel Frets
  • Locking Tuners
  • Expensive Wood
  • Top Brand Pickups
  • Multi-Voicing Pickups
  • Made in South Korea
  • No High-Quality Nut
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
PRS DW CE 24 Floyd
  • Locking Tuners
  • Made in United States
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Retainer Bar
  • No Strap Lock

Final Build Quality Scores

ESP LTD XJ-1 HT
Quality of materials 76
Features 65
Quality Control 75
Build Quality 72
PRS DW CE 24 Floyd
Quality of materials 45
Features 70
Quality Control 95
Build Quality 70

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

ESP LTD XJ-1 HT Nut Width
ESP LTD XJ-1 HT Nut Width
PRS DW CE 24 Floyd Nut Width
PRS DW CE 24 Floyd Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the PRS DW CE 24 Floyd has the wider nut with 42.1mm (1.656'') vs 42mm (1.654''). This is a 0.1mm (0.002'') difference

This means that it will be more difficult to do bar chords on the PRS DW CE 24 Floyd, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

ESP LTD XJ-1 HT's Scale Length
ESP LTD XJ-1 HT's Scale Length
PRS DW CE 24 Floyd's Scale Length
PRS DW CE 24 Floyd's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The ESP LTD XJ-1 HT has the longest scale: 25.5". The PRS DW CE 24 Floyd is only 25" long. This is a 0.5'' (12.7mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

ESP LTD XJ-1 HT Neck Profile
ESP LTD XJ-1 HT's neck profile
PRS DW CE 24 Floyd Neck Profile
PRS DW CE 24 Floyd's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The ESP LTD XJ-1 HT has a U type of neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

The PRS DW CE 24 Floyd, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

ESP LTD XJ-1 HT Fingerboard Radius
ESP LTD XJ-1 HT's Fingerboard radius
PRS DW CE 24 Floyd Fingerboard Radius
PRS DW CE 24 Floyd's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the PRS DW CE 24 Floyd's fingerboard radius is smaller, which means it's more curved than the ESP LTD XJ-1 HT's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the ESP LTD XJ-1 HT.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the ESP LTD XJ-1 HT favors large hands more than the PRS DW CE 24 Floyd. But it's still more comfortable for people with small hands, as you can see in the score meter below.

ESP LTD XJ-1 HT:
Big Hands
Small Hands
PRS DW CE 24 Floyd:
Big Hands
Small Hands

Fret Size

ESP LTD XJ-1 HT Frets Size
ESP LTD XJ-1 HT's Frets Size
PRS DW CE 24 Floyd Frets Size
PRS DW CE 24 Floyd's Frets Size

The ESP LTD XJ-1 HT has XL Jumbo frets, which should be taller than the PRS DW CE 24 Floyd's Medium Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

ESP LTD XJ-1 HT
Bending & Vibrato Ease 85
Chord Playability 70
Solo Playability 70
Playability 75
PRS DW CE 24 Floyd
Bending & Vibrato Ease 70
Chord Playability 80
Solo Playability 75
Playability 75

Specs Side-by-Side

LTD XJ-1 HT vs PRS DW CE 24 Floyd
General LTD XJ-1 HT PRS DW CE 24 Floyd
Brand: ESP LTD PRS
Year: 2024 2020
Configuration: H HH
Strings: 6 6
Made in: South Korea United States
Series: XJ Bolt-On
Colors: Black Black, Blue, Brown Burst, Red Burst
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Swamp Ash Mahogany
Bridge: Hipshot w/ String Thru Floyd Rose 1000 Tremolo w/ Locking Nut
Neck
Neck Joint: Bolt-On Bolt-On
Tuners: LTD Locking PRS Low Mass Locking
Fretboard: Macassar Ebony Maple
Neck Material: 3Pc Roasted Maple Maple
Decoration: Blocks Black Birds
Scale Size: 25.5" 25"
Shape: Thin U Dustie Waring
Thickness: 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) 1st Fret: - 12th Fret:
Frets: 22 XL Jumbo Stainless Steel 24 Medium Jumbo Nickel Silver
Fretboard Radius: 13.78" 10"
Nut: Plastic Locking
Nut Width: 42mm (1.654'') 42.1mm (1.656'')
Electronics
Bridge Pickup: Fishman Fluence Open Core Classic Humbucker Black *(Pull Volume for Voice 3) (Humbucker / Active) PRS Mojotone Tomahawk Gen 2 (Humbucker / Passive)
Middle Pickup:
Neck Pickup: PRS Mojotone Tomahawk Gen 2 (Humbucker / Passive)
Switch: 0 Way 5 Way
Knobs: Dome Dome
Pickup Mods: Multi-Voicing None
Volume Controls: 1 1
Tone Controls: 0 1