Swap
Swap
ESP LTD EC-256QM
Ibanez AR520HFM
VS
Playability
80
Sound
72
Build
55
Value
74
Score
69
FIND IT ON:
Sweetwater logoReverb logo
Playability
73
Sound
64
Build
55
Value
69
Score
64
FIND IT ON:
Reverb logoSweetwater logoAmazon logoMusician's Friend logo
Add to Compare
Add to Compare
Side to side spec comparison >

LTD EC-256QM vs Ibanez AR520HFM

Reasons to Get
LTD EC-256QM over Ibanez AR520HFM

Country of Manufacturing
Indonesia vs China
Built with higher quality standards
Release Year
2024 vs 2021
From a more recent year
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
XL Jumbo vs Medium
You won't feel the fretboard when pressing down the strings
Neck Profile
Thin U vs AR
Comfortable neck with more grip
Pickups Brand
ESP vs None
Pickups from a renown brand
Body Type
Solid Body vs Semi-Hollow
Feedback free
Volume Knobs
2 vs 1
More volume control
Neck Thickness at 1st Fret
0.787'' (20mm) vs 0.79'' (20.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.866'' (22mm) vs 0.87'' (22.1mm)
More comfortable at higher frets for small hands
Nut Width
1.654'' (42mm) vs 1.693'' (43mm)
Favors small hands, easier bar chords and other shapes
Fretboard Radius
13.78'' (350mm) vs 12'' (304.8mm)
Flatter fretboard makes it easier to play single notes and bend
Value Score
74 vs 69
Better price/quality relationship

Reasons to Get
Ibanez AR520HFM over ESP LTD EC-256QM

Type of Frets
Medium vs XL Jumbo
You'll feel the fretboard when pressing down the strings
Neck Profile
AR vs Thin U
Thin neck for playing fast
Pickup Mods
Tri-Sound vs None
Grants 3 ways to modify the sound of the pickups
Body Type
Semi-Hollow vs Solid Body
Lighter and allows more gain than a hollowbody
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.787'' (20mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.87'' (22.1mm) vs 0.866'' (22mm)
More comfortable at higher frets for big hands
Nut Width
1.693'' (43mm) vs 1.654'' (42mm)
Less likely to mute strings by accident and more space for fingerstyle
Fretboard Radius
12'' (304.8mm) vs 13.78'' (350mm)
More curved fretboard helpful to play chords without muting strings

Other Key Differences
LTD EC-256QM vs Ibanez AR520HFM

Bridge Pickup
ESP LH-150B vs Super 58
Different Bridge Pickup
Neck Pickup
ESP LH-150N vs Super 58
Different Neck Pickup
Body Wood
Mahogany vs Maple
Different Body Wood
Neck Wood
Mahogany vs Maple
Different Neck Wood

Shared Features
LTD EC-256QM vs Ibanez AR520HFM

Fretboard Wood
Jatoba
Same Fretboard Wood
Headstock
3-3
Same Headstock
Nut Material
Plastic
Same Nut Material
Strings
6
Same playing style
Switch Positions
3
Same pickups versatility
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
22
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
24.75'' (628.7mm)
Same string tension and fret separation
Pickups Power
Passive
Cleaner sound and no battery needed
Decorative Top
Quilted Maple vs Flamed Maple
Finished with beautiful natural wood patterns
Neck Joint
Set
Neck is glued to the body

Common Weaknesses

  • Neck-Through Build
  • Locking Tuners
  • Stays in Tune (Evertune)
  • High-Quality Nut
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the ESP LTD EC-256QM is probably the better product overall with its final score of 69 compared to the Ibanez AR520HFM's 64 score, although not by a lot.

The ESP LTD EC-256QM wins when it comes to sound, playability, value for the money. On the other hand, the Ibanez AR520HFM has the upper hand when it comes to.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the ESP LTD EC-256QM is the better choice.

The ESP LTD EC-256QM meets 5 out of our 8 criteria items for beginner friendliness, while the Ibanez AR520HFM meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

ESP LTD EC-256QM
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

New Player Friendliness

Ibanez AR520HFM
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

ESP LTD EC-256QM Overview

  • From ESP LTD's 2024 EC series
  • Made in Indonesia
  • 6 strings
  • 24.75"'' scale
  • 13.78" Fretboard Radius
  • Quilted Maple top
  • Mahogany body
  • 3Pc Mahogany neck
  • Roasted Jatoba fretboard
  • Bridge pickup: ESP LH-150B (Humbucker/Passive)
  • Neck pickup: ESP LH-150N (Humbucker/Passive)
  • 2 volume and 1 tone Speed knobs
  • 3-way Switch
  • TOM & Tailpiece bridge
  • Thin U Set neck
  • 22 XL Jumbo frets
  • LTD tuners
  • Compare Specs >

Ibanez AR520HFM Overview

  • From Ibanez's 2021 AR series
  • Made in China
  • 6 strings
  • 24.75"'' scale
  • 12" Fretboard Radius
  • Flamed Maple top
  • Maple body
  • 3pc Maple neck
  • Bound Jatoba fretboard
  • Bridge pickup: Super 58 (Humbucker/Passive)
  • Neck pickup: Super 58 (Humbucker/Passive)
  • 1 volume and 1 tone Speed knobs
  • 3-way Switch
  • Gibraltar Performer bridge
  • AR Set neck
  • 22 Medium frets
  • Ibanez tuners
  • Weight between 6.65lbs (3kgs) and 7.2lbs (3.3kgs)
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Jatoba wood pattern used for guitar building
Jatoba

Jatoba is a hard and dense wood that emphasizes the mid-lows, giving a fuller, more round sound than, for example, Mahogany. However, it also has a lot of clarity in the top end. Find out more about Jatoba.

Woods Used in the ESP LTD EC-256QM

Mahogany wood pattern used for guitar building
Mahogany

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Woods Used in the Ibanez AR520HFM

Maple wood pattern used for guitar building
Maple

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Winner: ESP LTD EC-256QM.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The ESP LTD EC-256QM has pickups from a more specialized brand than the Ibanez AR520HFM. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: ESP LTD EC-256QM.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Only the Ibanez AR520HFM comes with some kind of pickup modification: Tri-Sound.

Tri-Sound gives you the choice of using the pickup coils at the same time, splitting them or connect them im parallel for a brighter sound.

ESP LTD EC-256QM pickups switch and push knobs diagram
ESP LTD EC-256QM's switch options
Ibanez AR520HFM pickups switch and push knobs diagram
Ibanez AR520HFM's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Ibanez AR520HFM.

Final Sound Quality Scores

ESP LTD EC-256QM
Pickups 90
Sustain 80
Versatility 51
Tuning Stability 65
Sound 72
Ibanez AR520HFM
Pickups 60
Sustain 70
Versatility 59
Tuning Stability 65
Sound 64

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the ESP LTD EC-256QM compares to the Ibanez AR520HFM.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The ESP LTD EC-256QM is built in Indonesia while the Ibanez AR520HFM is made in China.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Winner: ESP LTD EC-256QM

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Plastic nuts. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

Both come with regular tuners. The ESP LTD EC-256QM's are LTD while the Ibanez AR520HFM's are Ibanez

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
ESP LTD EC-256QM
  • Expensive Wood
  • Top Brand Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No High-Quality Nut
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Ibanez AR520HFM
  • Tri-Sound Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No Expensive Woods
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

ESP LTD EC-256QM
Quality of materials 45
Features 50
Quality Control 70
Build Quality 55
Ibanez AR520HFM
Quality of materials 45
Features 60
Quality Control 60
Build Quality 55

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

ESP LTD EC-256QM Nut Width
ESP LTD EC-256QM Nut Width
Ibanez AR520HFM Nut Width
Ibanez AR520HFM Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Ibanez AR520HFM has the wider nut with 43mm (1.693'') vs 42mm (1.654''). This is a 1mm (0.039'') difference

This means that it will be more difficult to do bar chords on the Ibanez AR520HFM, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

ESP LTD EC-256QM and Ibanez AR520HFM's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 24.75".

This is the scale length that Gibson uses for most of its Les Paul guitars. It's a smaller scale than the typical Stratocaster's 25.5''. Short scale lengths like this make it easier to bend the strings, which is pretty important if you have a fixed bridge. They also have a shorter fret separation, which makes it easier to change position fast at the fretboard.

On the other hand, a shorter scale like this one will make fret buzz more likely, which can affect you if you want to use thicker string gauges.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

ESP LTD EC-256QM Neck Profile
ESP LTD EC-256QM's neck profile
Ibanez AR520HFM Neck Profile
Ibanez AR520HFM's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The ESP LTD EC-256QM has a U type of neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

The Ibanez AR520HFM, on the other hand, has a SA neck. Like most Ibanez necks, it's thinner than most modern C necks. It's very similar in thickness and shape to their unique Wizard profile.

Fretboard Radius

ESP LTD EC-256QM Fingerboard Radius
ESP LTD EC-256QM's Fingerboard radius
Ibanez AR520HFM Fingerboard Radius
Ibanez AR520HFM's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Ibanez AR520HFM's fingerboard radius is smaller, which means it's more curved than the ESP LTD EC-256QM's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the ESP LTD EC-256QM.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

ESP LTD EC-256QM:
Big Hands
Small Hands
Ibanez AR520HFM:
Big Hands
Small Hands

Fret Size

ESP LTD EC-256QM Frets Size
ESP LTD EC-256QM's Frets Size
Ibanez AR520HFM Frets Size
Ibanez AR520HFM's Frets Size

The ESP LTD EC-256QM has XL Jumbo frets, which should be taller than the Ibanez AR520HFM's Medium frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

ESP LTD EC-256QM
Bending & Vibrato Ease 95
Chord Playability 75
Solo Playability 70
Playability 80
Ibanez AR520HFM
Bending & Vibrato Ease 85
Chord Playability 65
Solo Playability 70
Playability 73

Specs Side-by-Side

LTD EC-256QM vs Ibanez AR520HFM
General LTD EC-256QM Ibanez AR520HFM
Brand: ESP LTD Ibanez
Year: 2024 2021
Configuration: HH HH
Strings: 6 6
Made in: Indonesia China
Series: EC AR
Colors: Burst Sunburst
Left-Handed Version: No No
Body
Type: Solid Body Semi-Hollow
Body Material: Mahogany Maple
Bridge: TOM & Tailpiece Gibraltar Performer
Neck
Neck Joint: Set Set
Tuners: LTD Ibanez
Fretboard: Roasted Jatoba Bound Jatoba
Neck Material: 3Pc Mahogany 3pc Maple
Decoration: Flags Acrylic & Abalone block
Scale Size: 24.75" 24.75"
Shape: Thin U AR
Thickness: 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 22 XL Jumbo Nickel Silver 22 Medium Nickel Silver
Fretboard Radius: 13.78" 12"
Nut: Plastic Plastic
Nut Width: 42mm (1.654'') 43mm (1.693'')
Electronics
Bridge Pickup: ESP LH-150B (Humbucker / Passive) Super 58 (Humbucker / Passive)
Middle Pickup:
Neck Pickup: ESP LH-150N (Humbucker / Passive) Super 58 (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Speed Speed
Pickup Mods: None Tri-Sound
Volume Controls: 2 1
Tone Controls: 1 1