Swap
Swap
ESP Horizon-I
Schecter C-7 Deluxe
VS
Playability
80
Sound
81
Build
79
Value
65
Score
80
FIND IT ON:
Reverb logoSweetwater logo
Playability
75
Sound
66
Build
52
Value
74
Score
64
FIND IT ON:
Reverb logoAmazon logoMusician's Friend logoSweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

ESP Horizon-I vs Schecter C-7 Deluxe

Reasons to Get
ESP Horizon-I over Schecter C-7 Deluxe

Country of Manufacturing
Japan vs Indonesia
Built with higher quality standards
Release Year
2017 vs 2015
From a more recent year
Neck Profile
Thin U vs Thin C
Comfortable neck with more grip
Pickups Brand
Seymour Duncan vs None
Pickups from a renown brand
Nut Material
Locking vs Graphite
Best tuning stability for intense tremolo usage
Neck Joint
Neck-Through vs Bolt-On
Stronger neck and easier access to upper frets
Strings
6 vs 7
Narrower neck and fewer strings to change
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.787'' (20mm) vs 0.79'' (20.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.866'' (22mm) vs 0.87'' (22.1mm)
More comfortable at higher frets for small hands
Nut Width
1.654'' (42mm) vs 1.89'' (48mm)
Favors small hands, easier bar chords and other shapes
Bridge
Floyd Rose vs Fixed
Allows intense vibratos and techniques like Dive Bombs
Scale Length
25.5'' (647.7mm) vs 26.5'' (673.1mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
12'' (304.8mm) vs 16'' (406.4mm)
More curved fretboard helpful to play chords without muting strings

Reasons to Get
Schecter C-7 Deluxe over ESP Horizon-I

Neck Profile
Thin C vs Thin U
Comfortable neck that works for most people
Strings
7 vs 6
Allows you to play lower notes
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.787'' (20mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.87'' (22.1mm) vs 0.866'' (22mm)
More comfortable at higher frets for big hands
Nut Width
1.89'' (48mm) vs 1.654'' (42mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Fixed vs Floyd Rose
Good sustain and needs no set-up
Scale Length
26.5'' (673.1mm) vs 25.5'' (647.7mm)
Lower action and brighter natural tone
Fretboard Radius
16'' (406.4mm) vs 12'' (304.8mm)
Flatter fretboard makes it easier to play single notes and bend
Value Score
74 vs 65
Better price/quality relationship

Other Key Differences
ESP Horizon-I vs Schecter C-7 Deluxe

Bridge Pickup
Seymour Duncan Custom Shop JB/Custom Hybrid Trembucker vs Schecter Diamond Plus
Different Bridge Pickup
Neck Pickup
Seymour Duncan Cool Rails vs Schecter Diamond Plus
Different Neck Pickup
Body Wood
Alder vs Basswood
Different Body Wood
Fretboard Wood
Ebony vs Rosewood
Different Fretboard Wood
Headstock
6 vs 3-4
Different Headstock
Nut Material
Locking vs Graphite
Different Nut Material

Shared Features
ESP Horizon-I vs Schecter C-7 Deluxe

Neck Wood
Maple
Same Neck Wood
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
24
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Pickups Power
Passive
Cleaner sound and no battery needed
Type of Frets
XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • Expensive Wood

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the ESP Horizon-I is probably the better product overall with its final score of 80 compared to the Schecter C-7 Deluxe's 64 score, which is a significant difference.

The ESP Horizon-I wins when it comes to sound, playability, build quality. On the other hand, the Schecter C-7 Deluxe has the upper hand when it comes to value for the money.

If you got small hands, you'll probably feel more comfortable playing the ESP Horizon-I.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the ESP Horizon-I is the better choice.

The ESP Horizon-I meets 5 out of our 8 criteria items for beginner friendliness, while the Schecter C-7 Deluxe meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

ESP Horizon-I
  • Comfortable shape
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Easy-to-use bridge

New Player Friendliness

Schecter C-7 Deluxe
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

ESP Horizon-I Overview

  • From ESP's 2017 Horizon series
  • Made in Japan
  • 6 strings
  • 25.5"'' scale
  • 12" Fretboard Radius
  • Alder body
  • 3pc Maple neck
  • Ebony fretboard
  • Bridge pickup: Seymour Duncan Custom Shop JB/Custom Hybrid Trembucker (Humbucker/Passive)
  • Neck pickup: Seymour Duncan Cool Rails (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Floyd Rose Original bridge
  • Thin U Neck-Through neck
  • 24 XL Jumbo frets
  • Gotoh Locking tuners
  • Weight around 7.55lbs (3.4kgs)
  • Compare Specs >

Schecter C-7 Deluxe Overview

  • From Schecter's 2015 C-6 Plus/Deluxe series
  • Made in Indonesia
  • 7 strings
  • 26.5"'' scale
  • 16" Fretboard Radius
  • Basswood body
  • Maple neck
  • Rosewood fretboard
  • Bridge pickup: Schecter Diamond Plus (Humbucker/Passive)
  • Neck pickup: Schecter Diamond Plus (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Tune-O-Matic w/ String Thru Body bridge
  • Thin C Bolt-On neck
  • 24 XL Jumbo frets
  • Schecter tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Woods Used in the ESP Horizon-I

Ebony wood pattern used for guitar building
Ebony
Alder wood pattern used for guitar building
Alder

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Woods Used in the Schecter C-7 Deluxe

Rosewood wood pattern used for guitar building
Rosewood
Basswood wood pattern used for guitar building
Basswood

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

Winner: Tie.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The ESP Horizon-I has pickups from a more specialized brand than the Schecter C-7 Deluxe. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.

You can purchase similar pickups to the ESP Horizon-I's and use them on any guitar:

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: ESP Horizon-I.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

They both share the following switching options:

ESP Horizon-I and Schecter C-7 Deluxe pickups switch and push knobs diagram
ESP Horizon-I and Schecter C-7 Deluxe's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: ESP Horizon-I.

Final Sound Quality Scores

ESP Horizon-I
Pickups 85
Sustain 80
Versatility 64
Tuning Stability 95
Sound 81
Schecter C-7 Deluxe
Pickups 55
Sustain 80
Versatility 59
Tuning Stability 70
Sound 66

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the ESP Horizon-I compares to the Schecter C-7 Deluxe.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The ESP Horizon-I is built in Japan while the Schecter C-7 Deluxe is made in Indonesia.

Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: ESP Horizon-I

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The ESP Horizon-I has a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

On the other hand, the Schecter C-7 Deluxe comes with a Graphite nut. It's a self-lubricating material that will allow the strings to slide over the nut without a lot of friction. It's a good type of nut if you want to have better tuning stability than with plastic, although it's not as resistant as Bone or Tusq.

Winner: ESP Horizon-I.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The ESP Horizon-I's brige is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

On the other hand, the Schecter C-7 Deluxe's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: ESP Horizon-I.

Tuners

The ESP Horizon-I has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Nevertheless, the ESP Horizon-I has a locking nut, so it should have even better tune stability and doesn't need locking tuners.

Winner: ESP Horizon-I.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The ESP Horizon-I has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

On the other hand, the Schecter C-7 Deluxe comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: ESP Horizon-I.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
ESP Horizon-I
  • Locking Tuners
  • Made in Japan
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Neck-Through Build
  • Tremolo
  • Retainer Bar
  • Cheap Fret Wire (NS)
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter C-7 Deluxe
  • Expensive Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

ESP Horizon-I
Quality of materials 51
Features 85
Quality Control 100
Build Quality 79
Schecter C-7 Deluxe
Quality of materials 41
Features 50
Quality Control 65
Build Quality 52

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

ESP Horizon-I Nut Width
ESP Horizon-I Nut Width
Schecter C-7 Deluxe Nut Width
Schecter C-7 Deluxe Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Schecter C-7 Deluxe has the wider nut with 48mm (1.89'') vs 42mm (1.654''). This is a 6mm (0.236'') difference

This means that it will be more difficult to do bar chords on the Schecter C-7 Deluxe, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

ESP Horizon-I's Scale Length
ESP Horizon-I's Scale Length
Schecter C-7 Deluxe's Scale Length
Schecter C-7 Deluxe's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Schecter C-7 Deluxe has the longest scale: 26.5". The ESP Horizon-I is only 25.5" long. This is a 1'' (25.4mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

ESP Horizon-I Neck Profile
ESP Horizon-I's neck profile
Schecter C-7 Deluxe Neck Profile
Schecter C-7 Deluxe's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The ESP Horizon-I has a U type of neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

The Schecter C-7 Deluxe, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

ESP Horizon-I Fingerboard Radius
ESP Horizon-I's Fingerboard radius
Schecter C-7 Deluxe Fingerboard Radius
Schecter C-7 Deluxe's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the ESP Horizon-I's fingerboard radius is smaller, which means it's more curved than the Schecter C-7 Deluxe's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter C-7 Deluxe.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Schecter C-7 Deluxe favors large hands more than the ESP Horizon-I.

ESP Horizon-I:
Big Hands
Small Hands
Schecter C-7 Deluxe:
Big Hands
Small Hands

Fret Size

ESP Horizon-I and Schecter C-7 Deluxe Frets Size
Both have a similar XL Jumbo fret size

Both have a XL Jumbo fret size. These are really tall frets made like this so you don't meet any resistance when playing techniques like vibrato, bending, tapping, etc. They should make the guitar easier to play, but you have to be careful not to get the notes out of pitch by pressing down too hard, which might happen since the fretboard will be too low to stop your hand.

Final Playability Scores

ESP Horizon-I
Bending & Vibrato Ease 80
Chord Playability 70
Solo Playability 90
Playability 80
Schecter C-7 Deluxe
Bending & Vibrato Ease 85
Chord Playability 50
Solo Playability 90
Playability 75

Specs Side-by-Side

ESP Horizon-I vs Schecter C-7 Deluxe
General ESP Horizon-I Schecter C-7 Deluxe
Brand: ESP Schecter
Year: 2017 2015
Configuration: HH HH
Strings: 6 7
Made in: Japan Indonesia
Series: Horizon C-6 Plus/Deluxe
Colors: Red, Gray, Blue and Purple White, Black
Left-Handed Version: No Yes
Body
Type: Solid Body Solid Body
Body Material: Alder Basswood
Bridge: Floyd Rose Original Tune-O-Matic w/ String Thru Body
Neck
Neck Joint: Neck-Through Bolt-On
Tuners: Gotoh Locking Schecter
Fretboard: Ebony Rosewood
Neck Material: 3pc Maple Maple
Decoration: Offset Blocks 4mm Dots
Scale Size: 25.5" 26.5"
Shape: Thin U Thin C
Thickness: 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 24 XL Jumbo Nickel Silver 24 XL Jumbo Nickel Silver
Fretboard Radius: 12" 16"
Nut: Locking Graphite
Nut Width: 42mm (1.654'') 48mm (1.89'')
Electronics
Bridge Pickup: Seymour Duncan Custom Shop JB/Custom Hybrid Trembucker (Humbucker / Passive) Schecter Diamond Plus (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Seymour Duncan Cool Rails (Humbucker / Passive) Schecter Diamond Plus (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Dome
Pickup Mods: None None
Volume Controls: 1 1
Tone Controls: 1 1