Chapman ML3 Pro BEA Baritone vs Schecter C-7 Pro
Reasons to Get
Chapman ML3 Pro BEA Baritone over Schecter C-7 Pro
Reasons to Get
Schecter C-7 Pro over Chapman ML3 Pro BEA Baritone
Other Key Differences
Chapman ML3 Pro BEA Baritone vs Schecter C-7 Pro
Shared Features
Chapman ML3 Pro BEA Baritone vs Schecter C-7 Pro
Common Strengths
- High-Quality Nut
Common Weaknesses
- Neck-Through Build
- Weight Relief
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- 21:1 Tuner Ratio
- Active/Passive Preamp
Table of Contents
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Which One is Better Overall?
After going through our comparison algorithm, the results show that the Chapman ML3 Pro BEA Baritone is probably the better product overall with its final score of 77 compared to the Schecter C-7 Pro's 68 score, although not by a lot.
The Chapman ML3 Pro BEA Baritone wins when it comes to sound, build quality. On the other hand, the Schecter C-7 Pro has the upper hand when it comes to value for the money.
If you got small hands, you'll probably feel more comfortable playing the Chapman ML3 Pro BEA Baritone.
Which One is Better for Beginners?
If you're looking for your first guitar to learn how to play, the Chapman ML3 Pro BEA Baritone is the better choice.
The Chapman ML3 Pro BEA Baritone meets 6 out of our 8 criteria items for beginner friendliness, while the Schecter C-7 Pro meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Chapman ML3 Pro BEA Baritone- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
New Player Friendliness
Schecter C-7 Pro- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.
Chapman ML3 Pro BEA Baritone Overview
- From Chapman's 2021 Signature series
- Rabea Massaad Signature
- Made in South Korea
- 6 strings
- 28"'' scale
- 13.78" Fretboard Radius
- Poplar Burl Solid Flat Top with Satin Finish top
- Alder body
- Wenge neck
- Wenge fretboard
- Bridge pickup: Bare Knuckle Silo Rabea Signature Humbucker (Humbucker/Passive)
- Neck pickup: Seymour Duncan SL59 (Humbucker/Passive)
- 1 volume and 1 tone Dome knobs
- 5-way Switch
- Hipshot 41060 Hardtail bridge
- C Shape Bolt-On neck
- 22 Jumbo Stainless Steel frets
- Hipshot Grip-Lock Open (18:1 Gearing) tuners
- Compare Specs >
Schecter C-7 Pro Overview
- From Schecter's 2020 C-6 Pro series
- Made in Indonesia
- 7 strings
- 26.5"'' scale
- 16" Fretboard Radius
- Burl top
- Mahogany body
- Maple 3-pc w/ Carbon Fiber Reinforcement Rods neck
- Wenge fretboard
- Bridge pickup: Schecter Diamond Decimator (Humbucker/Passive)
- Neck pickup: Schecter Diamond Decimator (Humbucker/Passive)
- 1 volume and 1 tone Dome knobs
- 3-way Switch
- Schecter Custom Hardtail w/ String Thru Body bridge
- Ultra Thin C Bolt-On neck
- 24 XL Jumbo frets
- Schecter tuners
- Compare Specs >
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Wenge is a stiff wood that comes with straight and tight grains. Its color is dark brown and the tonality emphasizes the low and mid-ends (warm) frequencies, similar to Rosewood.
Woods Used in the Chapman ML3 Pro BEA Baritone
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Woods Used in the Schecter C-7 Pro
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Winner: Schecter C-7 Pro.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
The Chapman ML3 Pro BEA Baritone has pickups from a more specialized brand than the Schecter C-7 Pro. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.
You can purchase similar pickups to the Chapman ML3 Pro BEA Baritone's and use them on any guitar:
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Chapman ML3 Pro BEA Baritone.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Chapman ML3 Pro BEA Baritone gives you 5 switch options while the Schecter C-7 Pro gives you 3. This means that the Chapman ML3 Pro BEA Baritone gives you more options to find the right pickup combination for the type of sound you want to achieve
Only the Schecter C-7 Pro comes with some kind of pickup modification: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Schecter C-7 Pro.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Chapman ML3 Pro BEA Baritone compares to the Schecter C-7 Pro.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Chapman ML3 Pro BEA Baritone is built in South Korea while the Schecter C-7 Pro is made in Indonesia.
South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Black Tusq XL nuts. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Chapman ML3 Pro BEA Baritone is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Chapman ML3 Pro BEA Baritone.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Chapman ML3 Pro BEA Baritone has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Chapman ML3 Pro BEA Baritone.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Chapman ML3 Pro BEA Baritone
- Stainless Steel Frets
- Locking Tuners
- Black Tusq XL Nut
- Top Brand Pickups
- Luminescent Inlay
- Strap Lock
- Made in South Korea
- No Expensive Woods
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
Schecter C-7 Pro
- Expensive Wood
- Black Tusq XL Nut
- Coil Split Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Top Brand Pickups
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Schecter C-7 Pro has the wider nut with 48mm (1.89'') vs 42mm (1.654''). This is a 6mm (0.236'') difference
This means that it will be more difficult to do bar chords on the Schecter C-7 Pro, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Chapman ML3 Pro BEA Baritone has the longest scale: 28". The Schecter C-7 Pro is only 26.5" long. This is a 1.5'' (38.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Chapman ML3 Pro BEA Baritone and the Schecter C-7 Pro have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Chapman ML3 Pro BEA Baritone's fingerboard radius is smaller, which means it's more curved than the Schecter C-7 Pro's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter C-7 Pro.
Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.
Hand Size Comfortability
Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Schecter C-7 Pro favors large hands more than the Chapman ML3 Pro BEA Baritone.
Chapman ML3 Pro BEA Baritone:
Schecter C-7 Pro:
Fret Size
The Schecter C-7 Pro has XL Jumbo frets, which should be taller than the Chapman ML3 Pro BEA Baritone's Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.