Chapman ML2 Pro vs Schecter Mark Thwaite Solo-II
Reasons to Get
Chapman ML2 Pro over Schecter Mark Thwaite Solo-II
Reasons to Get
Schecter Mark Thwaite Solo-II over Chapman ML2 Pro
Other Key Differences
Chapman ML2 Pro vs Schecter Mark Thwaite Solo-II
Shared Features
Chapman ML2 Pro vs Schecter Mark Thwaite Solo-II
Common Strengths
- Pickup Alter Switch/Knob
- Locking Tuners
- High-Quality Nut
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Weight Relief
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- 21:1 Tuner Ratio
- Active/Passive Preamp
Table of Contents
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Which One is Better Overall?
After going through our comparison algorithm, the results show that the Chapman ML2 Pro is probably the better product overall with its final score of 79 compared to the Schecter Mark Thwaite Solo-II's 75 score, although not by a lot.
The Chapman ML2 Pro wins when it comes to sound, build quality, value for the money. On the other hand, the Schecter Mark Thwaite Solo-II has the upper hand when it comes to.
If you got small hands, you'll probably feel that the Schecter Mark Thwaite Solo-II is easier to play.
Which One is Better for Beginners?
Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Chapman ML2 Pro- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
New Player Friendliness
Schecter Mark Thwaite Solo-II- Comfortable shape
- Locking tuners
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Easy-to-use bridge
Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.
Chapman ML2 Pro Overview
- From Chapman's 2022 Pro series
- Made in South Korea
- 6 strings
- 25.5"'' scale
- 12" Fretboard Radius
- Flame Maple Veneer On Maple Carved Top, Satin Finish top
- Mahogany body
- Roasted Maple – Dark Colour neck
- Macassar Ebony fretboard
- Bridge pickup: Seymour Duncan Pegasus (Humbucker/Passive)
- Neck pickup: Seymour Duncan Sentient (Humbucker/Passive)
- 2 volume and 1 tone Dome knobs
- 3-way Switch
- Chapman String Through hardtail bridge
- C Shape Neck-Through neck
- 24 Jumbo Stainless Steel frets
- Hipshot Grip-Lock Open (18:1 Gearing) tuners
- Compare Specs >
Schecter Mark Thwaite Solo-II Overview
- From Schecter's 2017 Artist series
- Mark Gemini Thwaite Signature
- Made in South Korea
- 6 strings
- 24.75"'' scale
- 14" Fretboard Radius
- Solid Maple top
- Mahogany body
- Mahogany 3-pc w/ Carbon Fiber Reinforcement Rods neck
- Rosewood fretboard
- Bridge pickup: Seymour Duncan JB SH-4 (Humbucker/Passive)
- Neck pickup: Seymour Duncan APH-1N (Humbucker/Passive)
- 2 volume and 1 tone Speed knobs
- 3-way Switch
- Bigsby Archtop B70 w/ Roller TonePros TOM TPFR – T3BT bridge
- Thin C Set neck
- 22 XL Jumbo frets
- Schecter Locking tuners
- Compare Specs >
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Woods Used in the Chapman ML2 Pro
Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Woods Used in the Schecter Mark Thwaite Solo-II
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Winner: Tie.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Schecter Mark Thwaite Solo-II has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
You can purchase similar pickups to the Chapman ML2 Pro's and use them on any guitar:
We found the same or similar pickups to the Schecter Mark Thwaite Solo-II's online:
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Schecter Mark Thwaite Solo-II.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Both offer you the same type of pickup mod: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
They both share the following switching options:
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Tie.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Chapman ML2 Pro compares to the Schecter Mark Thwaite Solo-II.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in South Korea.
South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Chapman ML2 Pro has a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
On the other hand, the Schecter Mark Thwaite Solo-II comes with a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Chapman ML2 Pro is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Chapman ML2 Pro.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Chapman ML2 Pro's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the Schecter Mark Thwaite Solo-II's is a Bigsby Tremolo. Bigsby tremolos are built differently than regular tremolos. They have a stiffer arm, which is something a lot of people like because the arm won't wiggle around a lot. On the other hand, this type of tremolo is more complicated to restring and it might not be as newbie-friendly as other simpler tremolos.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Schecter Mark Thwaite Solo-II.
Tuners
They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Chapman ML2 Pro has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
On the other hand, the Schecter Mark Thwaite Solo-II comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
Winner: Chapman ML2 Pro.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Chapman ML2 Pro
- Stainless Steel Frets
- Locking Tuners
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Neck-Through Build
- Coil Split Pickups
- Luminescent Inlay
- Strap Lock
- Made in South Korea
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
Schecter Mark Thwaite Solo-II
- Locking Tuners
- Expensive Wood
- Ivory Tusq Nut
- Top Brand Pickups
- Coil Split Pickups
- Tremolo
- Cheap Fret Wire (NS)
- Made in South Korea
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Chapman ML2 Pro has the wider nut with 43mm (1.693'') vs 42mm (1.654''). This is a 1mm (0.039'') difference
This means that it will be more difficult to do bar chords on the Chapman ML2 Pro, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Chapman ML2 Pro has the longest scale: 25.5". The Schecter Mark Thwaite Solo-II is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Chapman ML2 Pro and the Schecter Mark Thwaite Solo-II have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Chapman ML2 Pro's fingerboard radius is smaller, which means it's more curved than the Schecter Mark Thwaite Solo-II's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter Mark Thwaite Solo-II.
Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.
Hand Size Comfortability
Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Chapman ML2 Pro favors large hands more than the Schecter Mark Thwaite Solo-II.
Chapman ML2 Pro:
Schecter Mark Thwaite Solo-II:
Fret Size
The Schecter Mark Thwaite Solo-II has XL Jumbo frets, which should be taller than the Chapman ML2 Pro's Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
