Best Ibanez Guitars With HSH Configuration in 2026
Here you'll find the best Ibanez guitars with HSH configuration. Two humbuckers with one single-coil in the middle is a combination that people who love a warm neck Humbucker, but also a high output bridge pickup and cleanliness of a single-coil will appreciate. It gives a lot of versatility, but bear in mind that the middle pickup will have a lower volume, so you might want to adjust its height. The downside to this is that you might touch it with your pick sometimes if you increase its height too much.
After comparing the 2000+ guitars in our database, these are the best scoring ones with these characteristics. You can use our filters to the left to narrow down these results, or click on "Compare" to get a deep comparison between them. Our automated scoring system takes into account the ratings from ours users who own the guitar, and dozens of parameters to determine the build quality, playability, pickups quality, value for money, and more.
There are affiliate links on this page that may earn us a commission if you purchase after clicking. We are members of the Amazon Associates Program, and many others. However, we compare each guitar against each other under the same parameters, so this doesn't influence our scoring.
After comparing the 2000+ guitars in our database, these are the best scoring ones with these characteristics. You can use our filters to the left to narrow down these results, or click on "Compare" to get a deep comparison between them. Our automated scoring system takes into account the ratings from ours users who own the guitar, and dozens of parameters to determine the build quality, playability, pickups quality, value for money, and more.
There are affiliate links on this page that may earn us a commission if you purchase after clicking. We are members of the Amazon Associates Program, and many others. However, we compare each guitar against each other under the same parameters, so this doesn't influence our scoring.
1. Ibanez AZ2407F Prestige
Compare
What our users think
- Fret edges: Smooth (1 vote)
- Neck profile shape: C (12 votes)
- Neck speed (thickness): Balanced (13 votes)
- Pickups noise: Noiseless (18 votes)
- Pickups power: Hot (17 votes)
Show All Specs
| Ibanez AZ2407F Prestige | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2023 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | AZ | |
| Colors: | Blue, Brown | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Flamed Maple (4mm) | |
| Type: | Solid Body | |
| Body Material: | Basswood | |
| Bridge: | Gotoh T1502S | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh MG-T locking machine heads | |
| Fretboard: | Roasted Maple | |
| Neck Material: | Roasted Maple | |
| Decoration: | Abalone dot | |
| Scale Size: | 25.5" | |
| Shape: | AZ Oval C | |
| Thickness: | 1st Fret: 0.81'' (20.6mm) - 12th Fret: 0.89'' (22.6mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 12" | |
| Nut: | Bone | |
| Nut Width: | 42mm (1.654'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio The Tone Zone (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio True Velvet (Single Coil / Passive) | |
| Neck Pickup: | DiMarzio Air Norton (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Strengths & Weaknesses
Ibanez AZ2407F Prestige
Ibanez AZ2407F Prestige
- Stainless Steel Frets
- Locking Tuners
- Made in Japan
- Bone Nut
- Top Brand Pickups
- Luminescent Inlay
- Tremolo
- No Expensive Woods
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
2. Ibanez KIKO100
Compare
What our users think
- Neck access to high frets: Very Easy (1 vote)
- Fret edges: Slightly sharp (1 vote)
- Tuning stability: Holds tune well (1 vote)
- Weight: Slightly heavy (1 vote)
- Neck speed (thickness): Fast (1 vote)
- Pickups noise: Slightly Noisy (2 votes)
- Pickups power: Hot (2 votes)
Show All Specs
| Ibanez KIKO100 | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2022 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | KIKO | |
| Colors: | Red | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Flamed Maple | |
| Type: | Solid Body | |
| Body Material: | Alder | |
| Bridge: | Edge tremolo | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Rosewood | |
| Neck Material: | Maple/Walnut | |
| Decoration: | KIKO special | |
| Scale Size: | 25.5" | |
| Shape: | KIKO | |
| Thickness: | 1st Fret: 0.787'' (20mm) - 12th Fret: 0.878'' (22.3mm) | |
| Frets: | 24 Jumbo | |
| Fretboard Radius: | 15.75" | |
| Nut: | Locking | |
| Nut Width: | 42mm (1.654'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio KIKO original (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio KIKO original Single Coil (Single Coil / Passive) | |
| Neck Pickup: | DiMarzio KIKO original (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez KIKO100
Ibanez KIKO100
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Coil Split Pickups
- Tremolo
- Retainer Bar
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
3. Ibanez PIA3761C
Compare
What our users think
- Neck access to high frets: Very Easy (1 vote)
- Fret edges: Smooth (1 vote)
- Tuning stability: Won't get out of tune (1 vote)
- Weight: Slightly heavy (1 vote)
- Neck profile shape: D (1 vote)
- Neck speed (thickness): Fast (1 vote)
- Pickups noise: Noiseless (1 vote)
- Pickups power: Hot (1 vote)
Show All Specs
| Ibanez PIA3761C | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2022 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | PIA/JEM/UV | |
| Colors: | Blue | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Alder | |
| Bridge: | Edge tremolo | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Rosewood | |
| Neck Material: | Maple/Walnut | |
| Decoration: | PIA Blossom | |
| Scale Size: | 25.5" | |
| Shape: | PIA | |
| Thickness: | 1st Fret: 0.71'' (18mm) - 12th Fret: 0.79'' (20.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio UtoPIA (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio UtoPIA (Humbucker / Passive) | |
| Neck Pickup: | DiMarzio UtoPIA (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Strengths & Weaknesses
Ibanez PIA3761C
Ibanez PIA3761C
- Stainless Steel Frets
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Luminescent Inlay
- Tremolo
- Retainer Bar
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
4. Ibanez RGT1270PB Premium
Compare
What our users think
- Neck access to high frets: Easy (2 votes)
- Fret edges: Smooth (2 votes)
- Tuning stability: Won't get out of tune (2 votes)
- Weight: Lightweight (3 votes)
- Neck profile shape: D (34 votes)
- Neck speed (thickness): Fast (39 votes)
- Pickups noise: Noiseless (18 votes)
- Pickups power: Hot (17 votes)
Show All Specs
| Ibanez RGT1270PB Premium | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2022 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Indonesia | |
| Series: | RG | |
| Colors: | Black | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Poplar Burl | |
| Type: | Solid Body | |
| Body Material: | American Basswood | |
| Bridge: | Edge | |
| Neck | ||
| Neck Joint: | Neck-Through | |
| Tuners: | Gotoh | |
| Fretboard: | Ebony | |
| Neck Material: | 7pc Maple/Walnut | |
| Decoration: | Acrylic & Abalone block | |
| Scale Size: | 25.5" | |
| Shape: | Wizard III | |
| Thickness: | 1st Fret: 0.75'' (19.1mm) - 12th Fret: 0.83'' (21.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 15.75" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio The Tone Zone (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio True Velvet (Single Coil / Passive) | |
| Neck Pickup: | DiMarzio Air Norton (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez RGT1270PB Premium
Ibanez RGT1270PB Premium
- Stainless Steel Frets
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Neck-Through Build
- Luminescent Inlay
- Tremolo
- No Locking Tuners
- Made in Indonesia
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
All Prices
5. Ibanez RG5170G Prestige
Compare
What our users think
- Neck access to high frets: Very Easy (1 vote)
- Fret edges: Smooth (1 vote)
- Tuning stability: Won't get out of tune (1 vote)
- Weight: Lightweight (1 vote)
- Neck profile shape: D (19 votes)
- Neck speed (thickness): Herman Li fast (18 votes)
- Pickups noise: Noiseless (29 votes)
- Pickups power: Hot (29 votes)
Show All Specs
| Ibanez RG5170G Prestige | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2020 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Black, Silver | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Basswood | |
| Bridge: | Lo-Pro Edge tremolo | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Bound Macassar Ebony | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Off-set Mother of Pearl dot | |
| Scale Size: | 25.5" | |
| Shape: | Super Wizard | |
| Thickness: | 1st Fret: 0.67'' (17mm) - 12th Fret: 0.75'' (19.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | Fishman Fluence Modern Ceramic (Humbucker / Active) | |
| Middle Pickup: | Fishman Fluence Single-Width (Single Coil / Active) | |
| Neck Pickup: | Fishman Fluence Modern Alnico (Humbucker / Active) | |
| Switch: | 5 | |
| Knobs: | Bell | |
| Pickup Mods: | Multi-Voicing | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Gold | |
Strengths & Weaknesses
Ibanez RG5170G Prestige
Ibanez RG5170G Prestige
- Stainless Steel Frets
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Multi-Voicing Pickups
- Luminescent Inlay
- Tremolo
- Retainer Bar
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
6. Ibanez PIA3761
Compare
What our users think
- Neck profile shape: D (1 vote)
- Neck speed (thickness): Fast (1 vote)
- Pickups noise: Noiseless (1 vote)
- Pickups power: Hot (1 vote)
Show All Specs
| Ibanez PIA3761 | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2020 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | PIA/JEM/UV | |
| Colors: | White, Black | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Alder | |
| Bridge: | Edge tremolo | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Rosewood | |
| Neck Material: | Maple/Walnut | |
| Decoration: | PIA Blossom | |
| Scale Size: | 25.5" | |
| Shape: | PIA | |
| Thickness: | 1st Fret: 0.71'' (18mm) - 12th Fret: 0.79'' (20.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio UtoPIA (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio UtoPIA (Humbucker / Passive) | |
| Neck Pickup: | DiMarzio UtoPIA (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Gold | |
Strengths & Weaknesses
Ibanez PIA3761
Ibanez PIA3761
- Stainless Steel Frets
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Luminescent Inlay
- Tremolo
- Retainer Bar
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
7. Ibanez RG8870
Compare
What our users think
- Neck access to high frets: Very Easy (1 vote)
- Fret edges: Smooth (1 vote)
- Tuning stability: Holds tune well (1 vote)
- Weight: Heavy (1 vote)
- Neck profile shape: D (19 votes)
- Neck speed (thickness): Herman Li fast (18 votes)
- Pickups noise: Noiseless (18 votes)
- Pickups power: Hot (17 votes)
Show All Specs
| Ibanez RG8870 | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2023 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Black | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | AAA Flamed Maple (4mm) | |
| Type: | Solid Body | |
| Body Material: | Alder | |
| Bridge: | Lo-Pro Edge | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Macassar Ebony | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Tree of Life | |
| Scale Size: | 25.5" | |
| Shape: | Super Wizard | |
| Thickness: | 1st Fret: 0.67'' (17mm) - 12th Fret: 0.75'' (19.1mm) | |
| Frets: | 24 Jumbo | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio The Tone Zone (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio True Velvet (Single Coil / Passive) | |
| Neck Pickup: | DiMarzio PAF 36th Anniversary (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | Yes | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez RG8870
Ibanez RG8870
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Coil Split Pickups
- Tremolo
- Retainer Bar
- Strap Lock
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
All Prices
8. Ibanez AZ47P1QM Premium
Compare
What our users think
- Neck access to high frets: Very Easy (1 vote)
- Fret edges: Smooth (1 vote)
- Tuning stability: Sightly unstable (1 vote)
- Weight: Slightly heavy (1 vote)
- Neck profile shape: C (12 votes)
- Neck speed (thickness): Balanced (13 votes)
- Pickups noise: Noiseless (18 votes)
- Pickups power: Hot (17 votes)
Show All Specs
| Ibanez AZ47P1QM Premium | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2022 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Indonesia | |
| Series: | AZ | |
| Colors: | Black Burst | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Quilted Maple | |
| Type: | Solid Body | |
| Body Material: | American Basswood | |
| Bridge: | Gotoh T1502 | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh MG-T locking machine heads | |
| Fretboard: | Ebony | |
| Neck Material: | Roasted Maple | |
| Decoration: | Mother of Pearl dot | |
| Scale Size: | 25.5" | |
| Shape: | AZ Oval C | |
| Thickness: | 1st Fret: 0.81'' (20.6mm) - 12th Fret: 0.89'' (22.6mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 12" | |
| Nut: | Ivory Tusq | |
| Nut Width: | 42mm (1.654'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio The Tone Zone (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio True Velvet (Single Coil / Passive) | |
| Neck Pickup: | DiMarzio Air Norton (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Speed | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Gold | |
Strengths & Weaknesses
Ibanez AZ47P1QM Premium
Ibanez AZ47P1QM Premium
- Stainless Steel Frets
- Locking Tuners
- Expensive Wood
- Ivory Tusq Nut
- Top Brand Pickups
- Luminescent Inlay
- Tremolo
- Made in Indonesia
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
9. Ibanez S1070PBZ Premium
Compare
What our users think
- Neck profile shape: D (3 votes)
- Neck speed (thickness): Herman Li fast (3 votes)
- Pickups noise: Noiseless (18 votes)
- Pickups power: Hot (17 votes)
Show All Specs
| Ibanez S1070PBZ Premium | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2018 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Indonesia | |
| Series: | S | |
| Colors: | Black, Blue | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Poplar Burl/Walnut/Curly Maple/Panga Panga (16.5mm) | |
| Type: | Solid Body | |
| Body Material: | African Mahogany | |
| Bridge: | Edge-Zero II w/ZPS3Fe | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh MG-T locking machine heads | |
| Fretboard: | Rosewood | |
| Neck Material: | 11pc Panga Panga/Maple/Walnut/Bubinga | |
| Decoration: | Mother of Pearl off-set dot inlay | |
| Scale Size: | 25.5" | |
| Shape: | Wizard | |
| Thickness: | 1st Fret: 0.71'' (18mm) - 12th Fret: 0.79'' (20.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 15.748" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio The Tone Zone (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio True Velvet (Single Coil / Passive) | |
| Neck Pickup: | DiMarzio Air Norton (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Strengths & Weaknesses
Ibanez S1070PBZ Premium
Ibanez S1070PBZ Premium
- Stainless Steel Frets
- Locking Tuners
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Luminescent Inlay
- Tremolo
- Made in Indonesia
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
All Prices
10. Ibanez RG8570 j.custom
Compare
What our users think
- Neck access to high frets: Very Easy (2 votes)
- Fret edges: Smooth (2 votes)
- Tuning stability: Won't get out of tune (2 votes)
- Weight: Heavy (2 votes)
- Neck profile shape: D (19 votes)
- Neck speed (thickness): Herman Li fast (18 votes)
- Pickups noise: Noiseless (18 votes)
- Pickups power: Hot (17 votes)
Show All Specs
| Ibanez RG8570 j.custom | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2023 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Black | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | AAA Flamed Maple (4mm) | |
| Type: | Solid Body | |
| Body Material: | African Mahogany | |
| Bridge: | Lo-Pro Edge | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Bound Macassar Ebony | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Tree of Life | |
| Scale Size: | 25.5" | |
| Shape: | Super Wizard | |
| Thickness: | 1st Fret: 0.67'' (17mm) - 12th Fret: 0.75'' (19.1mm) | |
| Frets: | 24 Jumbo | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio The Tone Zone (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio True Velvet (Single Coil / Passive) | |
| Neck Pickup: | DiMarzio Air Norton (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | Yes | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez RG8570 j.custom
Ibanez RG8570 j.custom
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Tremolo
- Retainer Bar
- Strap Lock
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
