Best Ibanez Electric Guitars With Coil Split Switch in 2026
Here are the top Ibanez electric guitars with Coil Split switch. It allows you to 'split' or turn off pickup coils to get even more tones in combination with the pickup selector. When used with humbucker pickups, it'll reduce the output and increase their clarity, turning them essentially into single-coil pickups.
After comparing the 2000+ guitars in our database, these are the best scoring ones with these characteristics. You can use our filters to the left to narrow down these results, or click on "Compare" to get a deep comparison between them. Our automated scoring system takes into account the ratings from ours users who own the guitar, and dozens of parameters to determine the build quality, playability, pickups quality, value for money, and more.
There are affiliate links on this page that may earn us a commission if you purchase after clicking. We are members of the Amazon Associates Program, and many others. However, we compare each guitar against each other under the same parameters, so this doesn't influence our scoring.
After comparing the 2000+ guitars in our database, these are the best scoring ones with these characteristics. You can use our filters to the left to narrow down these results, or click on "Compare" to get a deep comparison between them. Our automated scoring system takes into account the ratings from ours users who own the guitar, and dozens of parameters to determine the build quality, playability, pickups quality, value for money, and more.
There are affiliate links on this page that may earn us a commission if you purchase after clicking. We are members of the Amazon Associates Program, and many others. However, we compare each guitar against each other under the same parameters, so this doesn't influence our scoring.
1. Ibanez LM1
Compare
What our users think
- Neck profile shape: C (12 votes)
- Neck speed (thickness): Balanced (13 votes)
- Pickups noise: Noiseless (1 vote)
- Pickups power: Clean (2 votes)
Show All Specs
| Ibanez LM1 | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2022 | |
| Configuration: | SSS | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | LM | |
| Colors: | White | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Alder | |
| Bridge: | Gotoh T1702B | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh MG-T locking machine heads | |
| Fretboard: | Rosewood | |
| Neck Material: | Roasted Maple | |
| Decoration: | Abalone dot | |
| Scale Size: | 25.5" | |
| Shape: | AZ Oval C | |
| Thickness: | 1st Fret: 0.81'' (20.6mm) - 12th Fret: 0.89'' (22.6mm) | |
| Frets: | 22 Jumbo Stainless Steel | |
| Fretboard Radius: | 9" to 12" | |
| Nut: | Bone | |
| Nut Width: | 42mm (1.654'') | |
| Electronics | ||
| Bridge Pickups: | Seymour Duncan Fortuna (H) (Humbucker / Passive) | |
| Middle Pickup: | Seymour Duncan Fortuna (H) (Humbucker / Passive) | |
| Neck Pickup: | Seymour Duncan Fortuna (H) (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Bell | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 2 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Strengths & Weaknesses
Ibanez LM1
Ibanez LM1
- Stainless Steel Frets
- Locking Tuners
- Made in Japan
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Coil Split Pickups
- Luminescent Inlay
- Tremolo
- Compound Radius Fretboard
- No Neck-Through Build
- No Weight Relief
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
2. Ibanez AZ2203N Prestige
Compare
What our users think
- Neck profile shape: C (12 votes)
- Neck speed (thickness): Balanced (13 votes)
- Pickups noise: Noiseless (1 vote)
- Pickups power: Clean (2 votes)
Show All Specs
| Ibanez AZ2203N Prestige | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2023 | |
| Configuration: | SSS | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | AZ | |
| Colors: | Black, Blue | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Alder | |
| Bridge: | Gotoh T1502S | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh Magnum Lock machine heads w/H.A.P. | |
| Fretboard: | Rosewood | |
| Neck Material: | Roasted Maple | |
| Decoration: | Mother of Pearl dot | |
| Scale Size: | 25.5" | |
| Shape: | AZ Oval C | |
| Thickness: | 1st Fret: 0.81'' (20.6mm) - 12th Fret: 0.89'' (22.6mm) | |
| Frets: | 22 Jumbo Stainless Steel | |
| Fretboard Radius: | 9" to 12" | |
| Nut: | Bone | |
| Nut Width: | 42mm (1.654'') | |
| Electronics | ||
| Bridge Pickups: | Seymour Duncan Fortuna (H) (Humbucker / Passive) | |
| Middle Pickup: | Seymour Duncan Fortuna (H) (Humbucker / Passive) | |
| Neck Pickup: | Seymour Duncan Fortuna (H) (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Bell | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 2 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Strengths & Weaknesses
Ibanez AZ2203N Prestige
Ibanez AZ2203N Prestige
- Stainless Steel Frets
- Locking Tuners
- Made in Japan
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Coil Split Pickups
- Luminescent Inlay
- Tremolo
- Compound Radius Fretboard
- No Neck-Through Build
- No Weight Relief
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
3. Ibanez KIKO100
Compare
What our users think
- Neck access to high frets: Very Easy (1 vote)
- Fret edges: Slightly sharp (1 vote)
- Tuning stability: Holds tune well (1 vote)
- Weight: Slightly heavy (1 vote)
- Neck speed (thickness): Fast (1 vote)
- Pickups noise: Slightly Noisy (2 votes)
- Pickups power: Hot (2 votes)
Show All Specs
| Ibanez KIKO100 | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2022 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | KIKO | |
| Colors: | Red | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Flamed Maple | |
| Type: | Solid Body | |
| Body Material: | Alder | |
| Bridge: | Edge tremolo | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Rosewood | |
| Neck Material: | Maple/Walnut | |
| Decoration: | KIKO special | |
| Scale Size: | 25.5" | |
| Shape: | KIKO | |
| Thickness: | 1st Fret: 0.787'' (20mm) - 12th Fret: 0.878'' (22.3mm) | |
| Frets: | 24 Jumbo | |
| Fretboard Radius: | 15.75" | |
| Nut: | Locking | |
| Nut Width: | 42mm (1.654'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio KIKO original (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio KIKO original Single Coil (Single Coil / Passive) | |
| Neck Pickup: | DiMarzio KIKO original (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez KIKO100
Ibanez KIKO100
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Coil Split Pickups
- Tremolo
- Retainer Bar
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
4. Ibanez RGR5221 Prestige
Compare
What our users think
- Neck access to high frets: Very Easy (4 votes)
- Fret edges: Smooth (3 votes)
- Tuning stability: Holds tune well (3 votes)
- Weight: Slightly heavy (4 votes)
- Neck profile shape: D (19 votes)
- Neck speed (thickness): Herman Li fast (18 votes)
- Pickups noise: Noiseless (4 votes)
- Pickups power: Hot (4 votes)
Show All Specs
| Ibanez RGR5221 Prestige | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2020 | |
| Configuration: | HH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Orange | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Ash | |
| Type: | Solid Body | |
| Body Material: | African Mahogany | |
| Bridge: | Gibraltar Standard II | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh MG-T locking machine heads | |
| Fretboard: | Bound Macassar Ebony | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Off-set Mother of Pearl dot | |
| Scale Size: | 25.5" | |
| Shape: | Super Wizard | |
| Thickness: | 1st Fret: 0.67'' (17mm) - 12th Fret: 0.75'' (19.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Black Tusq XL | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | Bare Knuckle Brute Force (Humbucker / Passive) | |
| Neck Pickup: | Bare Knuckle Brute Force (Humbucker / Passive) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez RGR5221 Prestige
Ibanez RGR5221 Prestige
- Stainless Steel Frets
- Locking Tuners
- Made in Japan
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Coil Split Pickups
- Luminescent Inlay
- No Neck-Through Build
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
5. Ibanez EH10
Compare
What our users think
- Neck profile shape: C (12 votes)
- Neck speed (thickness): Balanced (13 votes)
- Pickups noise: Slightly Noisy (5 votes)
- Pickups power: Slightly Hot (5 votes)
Show All Specs
| Ibanez EH10 | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2019 | |
| Configuration: | HS | |
| Strings: | 6 | |
| Made in: | Indonesia | |
| Series: | EH | |
| Colors: | Green | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Walnut | |
| Type: | Solid Body | |
| Body Material: | Nyatoh | |
| Bridge: | Gotoh T1502 tremolo | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh MG-T locking machine heads | |
| Fretboard: | Jatoba | |
| Neck Material: | Roasted Maple | |
| Decoration: | Off-set white block | |
| Scale Size: | 25.5" | |
| Shape: | AZ Oval C | |
| Thickness: | 1st Fret: 0.81'' (20.6mm) - 12th Fret: 0.89'' (22.6mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 12" | |
| Nut: | Ivory Tusq | |
| Nut Width: | 42mm (1.654'') | |
| Electronics | ||
| Bridge Pickups: | Seymour Duncan Hyperion (Humbucker / Passive) | |
| Neck Pickup: | Seymour Duncan Alnico II Pro APS1 (Single Coil / Passive) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Strengths & Weaknesses
Ibanez EH10
Ibanez EH10
- Stainless Steel Frets
- Locking Tuners
- Ivory Tusq Nut
- Top Brand Pickups
- Coil Split Pickups
- Luminescent Inlay
- Tremolo
- Made in Indonesia
- No Expensive Woods
- No Neck-Through Build
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
6. Ibanez RG5328 Prestige
Compare
What our users think
- Neck access to high frets: Easy (1 vote)
- Fret edges: Smooth (1 vote)
- Tuning stability: Holds tune well (1 vote)
- Weight: Heavy (1 vote)
- Neck profile shape: D (1 vote)
- Neck speed (thickness): Fast (1 vote)
- Pickups noise: Slightly Noisy (1 vote)
- Pickups power: Slightly Hot (1 vote)
Show All Specs
| Ibanez RG5328 Prestige | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2019 | |
| Configuration: | HH | |
| Strings: | 8 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Black | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Ash | |
| Bridge: | Gibraltar Standard II-8 | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh MG-T locking machine heads | |
| Fretboard: | Bound Macassar Ebony | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Mother of Pearl dot | |
| Scale Size: | 27" | |
| Shape: | Wizard-8 | |
| Thickness: | 1st Fret: 0.75'' (19.1mm) - 12th Fret: 0.83'' (21.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Black Tusq XL | |
| Nut Width: | 55mm (2.165'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio Fusion Edge 8 (Humbucker / Passive) | |
| Neck Pickup: | DiMarzio Fusion Edge 8 (Humbucker / Passive) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez RG5328 Prestige
Ibanez RG5328 Prestige
- Stainless Steel Frets
- Locking Tuners
- Made in Japan
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Coil Split Pickups
- Luminescent Inlay
- No Neck-Through Build
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
7. Ibanez JCRG2103 j.custom
Compare
What our users think
- Pickups noise: Noiseless (18 votes)
- Pickups power: Hot (17 votes)
Show All Specs
| Ibanez JCRG2103 j.custom | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2021 | |
| Configuration: | HH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Blue | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Exotic Maple & Gold Resin | |
| Type: | Solid Body | |
| Body Material: | African Mahogany | |
| Bridge: | Edge | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Ebony | |
| Neck Material: | 3pc Wenge/Purpleheart | |
| Decoration: | Blue Resin dot | |
| Scale Size: | 25.5" | |
| Shape: | RG j.custom Wizard | |
| Thickness: | 1st Fret: 0.71'' (18mm) - 12th Fret: 0.79'' (20.1mm) | |
| Frets: | 24 Jumbo Gold | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio The Tone Zone (Humbucker / Passive) | |
| Neck Pickup: | DiMarzio Air Norton (Humbucker / Passive) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | Yes | |
| Hardware Color: | Gold | |
Strengths & Weaknesses
Ibanez JCRG2103 j.custom
Ibanez JCRG2103 j.custom
- Gold Frets
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Coil Split Pickups
- Luminescent Inlay
- Tremolo
- Retainer Bar
- Strap Lock
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
All Prices
8. Ibanez RG8870
Compare
What our users think
- Neck access to high frets: Very Easy (1 vote)
- Fret edges: Smooth (1 vote)
- Tuning stability: Holds tune well (1 vote)
- Weight: Heavy (1 vote)
- Neck profile shape: D (19 votes)
- Neck speed (thickness): Herman Li fast (18 votes)
- Pickups noise: Noiseless (18 votes)
- Pickups power: Hot (17 votes)
Show All Specs
| Ibanez RG8870 | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2023 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Black | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | AAA Flamed Maple (4mm) | |
| Type: | Solid Body | |
| Body Material: | Alder | |
| Bridge: | Lo-Pro Edge | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Macassar Ebony | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Tree of Life | |
| Scale Size: | 25.5" | |
| Shape: | Super Wizard | |
| Thickness: | 1st Fret: 0.67'' (17mm) - 12th Fret: 0.75'' (19.1mm) | |
| Frets: | 24 Jumbo | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio The Tone Zone (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio True Velvet (Single Coil / Passive) | |
| Neck Pickup: | DiMarzio PAF 36th Anniversary (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | Yes | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez RG8870
Ibanez RG8870
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Coil Split Pickups
- Tremolo
- Retainer Bar
- Strap Lock
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
All Prices
9. Ibanez RG5320C Prestige
Compare
What our users think
- Weight: Heavy (1 vote)
- Neck profile shape: D (19 votes)
- Neck speed (thickness): Herman Li fast (18 votes)
- Pickups noise: Noiseless (18 votes)
- Pickups power: Hot (17 votes)
Show All Specs
| Ibanez RG5320C Prestige | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2021 | |
| Configuration: | HH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Blue | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | African Mahogany | |
| Bridge: | Lo-Pro Edge | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Bound Macassar Ebony | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Off-set Mother of Pearl dot | |
| Scale Size: | 25.5" | |
| Shape: | Super Wizard | |
| Thickness: | 1st Fret: 0.67'' (17mm) - 12th Fret: 0.75'' (19.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio The Tone Zone (Humbucker / Passive) | |
| Neck Pickup: | DiMarzio Air Norton (Humbucker / Passive) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Strengths & Weaknesses
Ibanez RG5320C Prestige
Ibanez RG5320C Prestige
- Stainless Steel Frets
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Coil Split Pickups
- Luminescent Inlay
- Tremolo
- Retainer Bar
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
10. Ibanez RG5320 Prestige
Compare
What our users think
- Neck access to high frets: Normal (1 vote)
- Neck profile shape: D (19 votes)
- Neck speed (thickness): Herman Li fast (18 votes)
- Pickups noise: Noiseless (6 votes)
- Pickups power: Slightly Hot (4 votes)
Show All Specs
| Ibanez RG5320 Prestige | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2020 | |
| Configuration: | HH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Black Patterns | |
| Left-Handed Version: | Yes | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | African Mahogany | |
| Bridge: | Lo-Pro Edge tremolo | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Bound Macassar Ebony | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Off-set Mother of Pearl dot | |
| Scale Size: | 25.5" | |
| Shape: | Super Wizard | |
| Thickness: | 1st Fret: 0.67'' (17mm) - 12th Fret: 0.75'' (19.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio Fusion Edge (Humbucker / Passive) | |
| Neck Pickup: | DiMarzio Fusion Edge (Humbucker / Passive) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez RG5320 Prestige
Ibanez RG5320 Prestige
- Stainless Steel Frets
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Coil Split Pickups
- Luminescent Inlay
- Tremolo
- Retainer Bar
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
