Swap
Swap
Washburn EA55G
Epiphone PR-5E
VS
Playability
73
Sound
83
Build
64
Value
83
Score
73
FIND IT ON:
Amazon logoReverb logoSweetwater logo
Playability
77
Sound
79
Build
64
Value
83
Score
73
FIND IT ON:
Sweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

Washburn EA55G vs Epiphone PR-5E

Reasons to Get
Washburn EA55G over Epiphone PR-5E

Release Year
2022 vs 2012
From a more recent year
Neck Profile
Acoustic Washburn Festival vs Acoustic C
Thin and flat neck for playing fast
Nut Material
NuBone vs Plastic
Hard and self-lubricating nut to keep it in tune
Nut Width
1.693'' (43mm) vs 1.68'' (42.7mm)
Less likely to mute strings by accident and more space for fingerstyle
Body Shape
Jumbo vs Thinline
Large body with a tight waist for more top-end

Reasons to Get
Epiphone PR-5E over Washburn EA55G

Neck Profile
Acoustic C vs Acoustic Washburn Festival
Comfortable neck that works for most people
Pickups Brand
Fishman vs None
Pickups from a renown brand
Nut Width
1.68'' (42.7mm) vs 1.693'' (43mm)
Favors small hands, easier bar chords and other shapes
Body Shape
Thinline vs Jumbo
Very thin and lightweight body

Other Key Differences
Washburn EA55G vs Epiphone PR-5E

Back Material
Other vs Mahogany
Different Back Material
Sides Material
Other vs Mahogany
Different Sides Material
Saddle Material
NuBone vs Plastic
Different Saddle Material
Bridge Material
Tech Wood vs Pau Ferro
Different Bridge Material
Body Wood
Koa vs Spruce
Different Body Wood
Fretboard Wood
Engineered vs Rosewood
Different Fretboard Wood
Nut Material
NuBone vs Plastic
Different Nut Material

Shared Features
Washburn EA55G vs Epiphone PR-5E

Neck Wood
Mahogany
Same Neck Wood
Headstock
3-3
Same Headstock
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Fretboard Radius
12'' (304.8mm)
Same fretboard comfortability
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Expensive Wood

Common Weaknesses

  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that both instruments scored 73 out of 100, which makes them similar in terms of quality.

The Epiphone PR-5E wins when it comes to playability. On the other hand, the Washburn EA55G has the upper hand when it comes to sound.

If you got small hands, you'll probably feel more comfortable playing the Epiphone PR-5E.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Epiphone PR-5E is the better choice.

The Epiphone PR-5E meets 5 out of our 8 criteria items for beginner friendliness, while the Washburn EA55G meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Washburn EA55G
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

New Player Friendliness

Epiphone PR-5E
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Soft Strings
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Washburn EA55G Overview

  • From Washburn's 2022 Festival series
  • Made in China
  • 6 strings
  • 25.5"'' scale
  • 12" Fretboard Radius
  • Koa top
  • Catalpa back
  • Catalpa sides
  • Mhogany neck
  • Tech Wood fretboard
  • Bridge pickup: Barcus Berry LX-4 (Preamp/Active)
  • Tech Wood bridge
  • Acoustic Washburn Festival Set neck
  • 20 Medium frets
  • Gold Die Cast tuners
  • Compare Specs >

Epiphone PR-5E Overview

  • From Epiphone's 2012 Modern Acoustic series
  • Made in China
  • 6 strings
  • 25.5"'' scale
  • 12" Fretboard Radius
  • Select Spruce top
  • Select Mahogany back
  • Select Mahogany sides
  • Mahogany neck
  • Rosewood fretboard
  • Bridge pickup: Fishman Sonicore (Preamp/Active)
  • Pau Ferro bridge
  • Acoustic C Set neck
  • 20 Medium frets
  • Epiphone Premium Die cast tuners
  • Compare Specs >

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Woods Used in the Washburn EA55G

Engineered wood pattern used for guitar building
Engineered
Koa wood pattern used for guitar building
Koa

Engineered wood is strong, stable, and cheaper than traditional wood. It's made by grounding wood and putting it back together to get more material out of less wood. It's a good material, but some people prefer traditional wood because of tradition, looks, and even tone.

It's a type of wood native to the Hawaiian Islands, where it's pretty common. Its musical properties make it a great wood for making guitars, but it's especially popular for building Ukuleles. Find out more about Koa.

Woods Used in the Epiphone PR-5E

Rosewood wood pattern used for guitar building
Rosewood
Spruce wood pattern used for guitar building
Spruce

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

Winner: Epiphone PR-5E.

Electronics

Both come with electronics that allow you connect them to an amplifier or interface for recording.

Winner:Tie.

Final Sound Quality Scores

Washburn EA55G
Sustain 75
Versatility 85
Tuning Stability 70
Sound 83
Epiphone PR-5E
Sustain 65
Versatility 85
Tuning Stability 65
Sound 79

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Washburn EA55G compares to the Epiphone PR-5E.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in China.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Washburn EA55G has a NuBone nut. It's made by the same company that makes TUSQ nuts. It's slightly softer but hard enough to give you a brighter sound when playing open strings. It's also self-lubricating, so it's good for tuning stability.

On the other hand, the Epiphone PR-5E comes with a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Winner: Washburn EA55G.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. The Washburn EA55G's are Gold Die Cast while the Epiphone PR-5E's are Epiphone Premium Die cast

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Washburn EA55G
  • Expensive Wood
  • NuBone Nut
  • Electronics
  • NuBone Saddle
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No Top Brand Pickups
  • Laminated Top Wood
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Epiphone PR-5E
  • Expensive Wood
  • Top Brand Pickups
  • Electronics
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No High-Quality Nut
  • Low-Quality Material Saddle
  • Laminated Top Wood
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Washburn EA55G
Quality of materials 61
Features 75
Quality Control 55
Build Quality 64
Epiphone PR-5E
Quality of materials 51
Features 85
Quality Control 55
Build Quality 64

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Washburn EA55G Nut Width
Washburn EA55G Nut Width
Epiphone PR-5E Nut Width
Epiphone PR-5E Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Washburn EA55G has the wider nut with 43mm (1.693'') vs 42.7mm (1.68''). This is a 0.3mm (0.013'') difference

This means that it will be more difficult to do bar chords on the Washburn EA55G, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Washburn EA55G and Epiphone PR-5E's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Washburn EA55G Neck Profile
Washburn EA55G's neck profile
Epiphone PR-5E Neck Profile
Epiphone PR-5E's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Washburn EA55G has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.

The Epiphone PR-5E, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Washburn EA55G Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Washburn EA55G and the Epiphone PR-5E have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Washburn EA55G favors large hands more than the Epiphone PR-5E. But it's still more comfortable for people with small hands, as you can see in the score meter below.

Washburn EA55G:
Big Hands
Small Hands
Epiphone PR-5E:
Big Hands
Small Hands

Fret Size

Washburn EA55G and Epiphone PR-5E Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Washburn EA55G
Bending & Vibrato Ease 75
Chord Playability 65
Solo Playability 80
Playability 73
Epiphone PR-5E
Bending & Vibrato Ease 75
Chord Playability 75
Solo Playability 80
Playability 77

Specs Side-by-Side

Washburn EA55G vs Epiphone PR-5E
General Washburn EA55G Epiphone PR-5E
Brand: Washburn Epiphone
Year: 2022 2012
Strings: 6 6
Made in: China China
Series: Festival Modern Acoustic
Colors: Sunburst Natural
Left-Handed Version: No No
Body
Type: Hollowbody Hollowbody
Body Material: Koa Select Spruce
Sides Material: Other Mahogany
Back Material: Other Mahogany
Bridge: Tech Wood Pau Ferro
Neck
Neck Joint: Set Set
Tuners: Gold Die Cast Epiphone Premium Die cast
Fretboard: Tech Wood Rosewood
Neck Material: Mhogany Mahogany
Decoration: Dots Dot
Scale Size: 25.5" 25.5"
Shape: Acoustic Washburn Festival Acoustic C
Frets: 20 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 12" 12"
Nut: NuBone Plastic
Nut Width: 43mm (1.693'') 42.7mm (1.68'')
Electronics
Bridge Pickup: Barcus Berry LX-4 (Preamp / Active) Fishman Sonicore (Preamp / Active)