Swap
Swap
Washburn D7S
Yamaha APX600
VS
Playability
73
Sound
80
Build
60
Value
81
Score
71
FIND IT ON:
Sweetwater logo
Playability
77
Sound
81
Build
60
Value
83
Score
73
FIND IT ON:
Sweetwater logoAmazon logoMusician's Friend logoReverb logo
Add to Compare
Add to Compare
Side to side spec comparison >

Washburn D7S vs Yamaha APX600

Reasons to Get
Washburn D7S over Yamaha APX600

Release Year
2019 vs 2015
From a more recent year
Top Wood
Solid vs Laminated
Helps with richer tones and louder volume
Body Shape
Dreadnought vs Thinline
Prominent low-end tones in a large body
Scale Length
25.5'' (647.7mm) vs 25'' (635mm)
Lower action and brighter natural tone
Fretboard Radius
12'' (304.8mm) vs 15.75'' (400.1mm)
More curved fretboard helpful to play chords without muting strings

Reasons to Get
Yamaha APX600 over Washburn D7S

Pickup Mods
Multi-Voicing vs None
Changes the voice (tones or gain) of the pickups
Body Shape
Thinline vs Dreadnought
Very thin and lightweight body
Scale Length
25'' (635mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
15.75'' (400.1mm) vs 12'' (304.8mm)
Flatter fretboard makes it easier to play single notes and bend
Value Score
83 vs 81
Better price/quality relationship

Other Key Differences
Washburn D7S vs Yamaha APX600

Back Material
Mahogany vs Tonewood
Different Back Material
Sides Material
Mahogany vs Tonewood
Different Sides Material
Bridge Material
Ovangkol vs Rosewood
Different Bridge Material
Neck Wood
Mahogany vs Tonewood
Different Neck Wood
Fretboard Wood
Ovangkol vs Rosewood
Different Fretboard Wood

Shared Features
Washburn D7S vs Yamaha APX600

Saddle Material
Plastic
Same Saddle Material
Body Wood
Spruce
Same Body Wood
Headstock
3-3
Same Headstock
Nut Material
Plastic
Same Nut Material
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Nut Width
1.693'' (43mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Expensive Wood

Common Weaknesses

  • Solid Side Wood
  • Solid Back Wood
  • Locking Tuners
  • High-Quality Nut
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • Top Pickup Brand
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Yamaha APX600 is probably the better product overall with its final score of 73 compared to the Washburn D7S's 71 score, although not by a lot.

The Yamaha APX600 wins when it comes to sound, playability, value for the money. On the other hand, the Washburn D7S has the upper hand when it comes to.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Yamaha APX600 is the better choice.

The Yamaha APX600 meets 4 out of our 8 criteria items for beginner friendliness, while the Washburn D7S meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Washburn D7S
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

New Player Friendliness

Yamaha APX600
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Washburn D7S Overview

  • From Washburn's 2019 Harvest series
  • Made in China
  • 6 strings
  • 25.5"'' scale
  • 12" Fretboard Radius
  • Solid Spruce top
  • Mahogany back
  • Mahogany sides
  • Satin Mahogany with 2 way Trussrod neck
  • Ovangkol fretboard
  • Bridge pickup: (/)
  • Ovangkol bridge
  • Acoustic Washburn Harvest Set neck
  • 20 Medium frets
  • Chrome Diecast tuners
  • Compare Specs >

Yamaha APX600 Overview

  • From Yamaha's 2015 APX series
  • Made in China
  • 6 strings
  • 25"'' scale
  • 15.75" Fretboard Radius
  • Spruce top
  • Locally-Sourced Tonewood back
  • Locally-Sourced Tonewood sides
  • Locally-Sourced Tonewood neck
  • Rosewood fretboard
  • Bridge pickup: SYSTEM65 + SRT Piezo Pickup (Preamp/Active)
  • Rosewood bridge
  • Acoustic C Set neck
  • 20 Medium frets
  • Die-Cast Chrome (TM29T) tuners
  • Weight between 4.35lbs (2kgs) and 4.45lbs (2kgs)
  • Compare Specs >

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Spruce wood pattern used for guitar building
Spruce

Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

Woods Used in the Washburn D7S

Mahogany wood pattern used for guitar building
Mahogany
Ovangkol wood pattern used for guitar building
Ovangkol

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Ovangkol is a beautiful wood that's popular for acoustic guitars. Its tone sits somewhere between rosewood and mahogany, meaning it has a punchy low-end and nice mid-range. Find out more about Ovangkol.

Woods Used in the Yamaha APX600

Tonewood wood pattern used for guitar building
Tonewood
Rosewood wood pattern used for guitar building
Rosewood

This is just a generic wood whose origin hasn't been disclosed. Commonly found in cheap guitars.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Winner: Tie.

Electronics

The Yamaha APX600 comes with a preamp that allows you to connect it to an amp, unlike its competitor. This allows it to have more versatility and sound quality if you want to record with it or play live.

Winner:Yamaha APX600.

Final Sound Quality Scores

Washburn D7S
Sustain 75
Versatility 80
Tuning Stability 65
Sound 80
Yamaha APX600
Sustain 65
Versatility 95
Tuning Stability 65
Sound 81

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Washburn D7S compares to the Yamaha APX600.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in China.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Plastic nuts. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. The Washburn D7S's are Chrome Diecast while the Yamaha APX600's are Die-Cast Chrome (TM29T)

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Washburn D7S
  • Expensive Wood
  • Solid Top Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Electronics
  • Low-Quality Material Saddle
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Yamaha APX600
  • Expensive Wood
  • Electronics
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No High-Quality Nut
  • No Top Brand Pickups
  • Low-Quality Material Saddle
  • Laminated Top Wood
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Washburn D7S
Quality of materials 61
Features 65
Quality Control 55
Build Quality 60
Yamaha APX600
Quality of materials 45
Features 80
Quality Control 55
Build Quality 60

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Washburn D7S Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 43mm (1.693'').

This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.

Scale Length

Washburn D7S's Scale Length
Washburn D7S's Scale Length
Yamaha APX600's Scale Length
Yamaha APX600's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Washburn D7S has the longest scale: 25.5". The Yamaha APX600 is only 25" long. This is a 0.5'' (12.7mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Washburn D7S Neck Profile
Washburn D7S's neck profile
Yamaha APX600 Neck Profile
Yamaha APX600's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Washburn D7S and the Yamaha APX600 have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Washburn D7S Fingerboard Radius
Washburn D7S's Fingerboard radius
Yamaha APX600 Fingerboard Radius
Yamaha APX600's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Washburn D7S's fingerboard radius is smaller, which means it's more curved than the Yamaha APX600's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Yamaha APX600.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Washburn D7S:
Big Hands
Small Hands
Yamaha APX600:
Big Hands
Small Hands

Fret Size

Washburn D7S and Yamaha APX600 Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Washburn D7S
Bending & Vibrato Ease 75
Chord Playability 65
Solo Playability 80
Playability 73
Yamaha APX600
Bending & Vibrato Ease 80
Chord Playability 70
Solo Playability 80
Playability 77

Specs Side-by-Side

Washburn D7S vs Yamaha APX600
General Washburn D7S Yamaha APX600
Brand: Washburn Yamaha
Year: 2019 2015
Strings: 6 6
Made in: China China
Series: Harvest APX
Colors: Sunburst, Natural Natural
Left-Handed Version: No No
Body
Type: Hollowbody Hollowbody
Body Material: Solid Spruce Spruce
Sides Material: Mahogany Tonewood
Back Material: Mahogany Tonewood
Bridge: Ovangkol Rosewood
Neck
Neck Joint: Set Set
Tuners: Chrome Diecast Die-Cast Chrome (TM29T)
Fretboard: Ovangkol Rosewood
Neck Material: Satin Mahogany with 2 way Trussrod Locally-Sourced Tonewood
Decoration: Dots Pearloid Dots
Scale Size: 25.5" 25"
Shape: Acoustic Washburn Harvest Acoustic C
Frets: 20 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 12" 15.75"
Nut: Plastic Plastic
Nut Width: 43mm (1.693'') 43mm (1.693'')
Electronics
Bridge Pickup: SYSTEM65 + SRT Piezo Pickup (Preamp / Active)