Swap
Swap
Takamine GN93
Takamine GN90CE-ZC
VS
Playability
77
Sound
81
Build
67
Value
80
Score
75
FIND IT ON:
Reverb logoAmazon logoMusician's Friend logoSweetwater logo
Playability
77
Sound
84
Build
74
Value
83
Score
78
FIND IT ON:
Amazon logoSweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

Takamine GN93 vs GN90CE-ZC

Reasons to Get
Takamine GN93 over GN90CE-ZC

Nut Width
1.685'' (42.8mm) vs 1.673'' (42.5mm)
Less likely to mute strings by accident and more space for fingerstyle
Scale Length
25.4'' (645.2mm) vs 25.3'' (642.6mm)
Lower action and brighter natural tone

Reasons to Get
Takamine GN90CE-ZC over GN93

Release Year
2019 vs 2015
From a more recent year
Pickups Brand
Takamine vs None
Pickups from a renown brand
Nut Width
1.673'' (42.5mm) vs 1.685'' (42.8mm)
Favors small hands, easier bar chords and other shapes
Scale Length
25.3'' (642.6mm) vs 25.4'' (645.2mm)
Easier bending, shorter fret separation and warmer natural tone
Value Score
83 vs 80
Better price/quality relationship

Other Key Differences
Takamine GN93 vs GN90CE-ZC

Back Material
Quilted Maple vs Ziricote
Different Back Material
Sides Material
Walnut vs Ziricote
Different Sides Material

Shared Features
Takamine GN93 vs GN90CE-ZC

Saddle Material
Synthetic Bone
Same Saddle Material
Bridge Material
Fixed
Same Bridge Material
Body Wood
Spruce
Same Body Wood
Neck Wood
Mahogany
Same Neck Wood
Fretboard Wood
Laurel
Same Fretboard Wood
Headstock
3-3
Same Headstock
Nut Material
Synthetic Bone
Same Nut Material
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Fretboard Radius
12'' (304.8mm)
Same fretboard comfortability
Neck Profile Type
Asymmetrical
Adapts to the natural shape of your hand
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Solid Top Wood
  • High-Quality Nut
  • Expensive Wood

Common Weaknesses

  • Solid Side Wood
  • Solid Back Wood
  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT

Takamine GN90CE-ZC Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Takamine GN90CE-ZC is probably the better product overall with its final score of 78 compared to the Takamine GN93's 75 score, although not by a lot.

The Takamine GN90CE-ZC wins when it comes to sound, build quality, value for the money. On the other hand, the Takamine GN93 has the upper hand when it comes to.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Takamine GN93
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Soft Strings
  • Locking tuners

New Player Friendliness

Takamine GN90CE-ZC
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Soft Strings
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Takamine GN93 Overview

  • From Takamine's 2015 G series
  • Made in China
  • 6 strings
  • 25.4"'' scale
  • 12" Fretboard Radius
  • Solid Spruce top
  • Black Walnut/Quilt Maple back
  • Black Walnut sides
  • Mahogany neck
  • Laurel fretboard
  • Bridge pickup: (/)
  • Fixed bridge
  • Acoustic Asymmetrical C Set neck
  • 20 Medium frets
  • Takamine Die-cast tuners
  • Compare Specs >

Takamine GN90CE-ZC Overview

  • From Takamine's 2019 G series
  • Made in China
  • 6 strings
  • 25.3"'' scale
  • 12" Fretboard Radius
  • Solid Spruce top
  • Ziricote back
  • Ziricote sides
  • Mahogany neck
  • Laurel fretboard
  • Bridge pickup: TP-4TD (Preamp/Active)
  • Fixed bridge
  • Acoustic Asymmetrical C Set neck
  • 20 Medium frets
  • Takamine Butterbean tuners
  • Compare Specs >

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany
Laurel wood pattern used for guitar building
Laurel
Spruce wood pattern used for guitar building
Spruce

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

There are many types of Laurel, but East Indian is the most common for guitar building. Its color can vary from dark to light brown with black lines. Many people find its tonality similar to Rosewood, which favors the warmer frequencies. Find out more about Laurel.

Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

Woods Used in the Takamine GN93

Quilted Maple wood pattern used for guitar building
Quilted Maple
Walnut wood pattern used for guitar building
Walnut

This wood has beautiful patterns only found in specific types of maple.

It's a hard wood with a chocolate color that is often used to give an elegant finish. Since it's quite expensive and rare, it's mostly used for guitar tops. Find out more about Walnut.

Woods Used in the Takamine GN90CE-ZC

Ziricote wood pattern used for guitar building
Ziricote

It's a rare and exotic wood native to Central America and the Caribbean with a unique appearance. It's commonly used for instruments as it produces a tone similar to Rosewood.

Winner: Tie.

Electronics

The Takamine GN90CE-ZC comes with a preamp that allows you to connect it to an amp, unlike its competitor. This allows it to have more versatility and sound quality if you want to record with it or play live.

Winner:Takamine GN90CE-ZC.

Final Sound Quality Scores

Takamine GN93
Sustain 75
Versatility 80
Tuning Stability 70
Sound 81
Takamine GN90CE-ZC
Sustain 80
Versatility 85
Tuning Stability 70
Sound 84

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Takamine GN93 compares to the Takamine GN90CE-ZC.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in China.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Synthetic Bone nuts. Bone is the best natural material for guitar nuts. However, its tonal properties can be inconsistent. That's the problem that synthetic bone fixes. This is much better than using a plastic nut because the nut is more slippery—which helps with tuning stability—, and it gives your open strings rich harmonics.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. The Takamine GN93's are Takamine Die-cast while the Takamine GN90CE-ZC's are Takamine Butterbean

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Takamine GN93
  • Expensive Wood
  • Synthetic Bone Nut
  • Synthetic Bone Saddle
  • Solid Top Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No Top Brand Pickups
  • No Electronics
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Takamine GN90CE-ZC
  • Expensive Wood
  • Synthetic Bone Nut
  • Top Brand Pickups
  • Electronics
  • Synthetic Bone Saddle
  • Solid Top Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Takamine GN93
Quality of materials 76
Features 65
Quality Control 60
Build Quality 67
Takamine GN90CE-ZC
Quality of materials 76
Features 85
Quality Control 60
Build Quality 74

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Takamine GN93 Nut Width
Takamine GN93 Nut Width
Takamine GN90CE-ZC Nut Width
Takamine GN90CE-ZC Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Takamine GN93 has the wider nut with 42.8mm (1.685'') vs 42.5mm (1.673''). This is a 0.3mm (0.012'') difference

This means that it will be more difficult to do bar chords on the Takamine GN93, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Takamine GN93's Scale Length
Takamine GN93's Scale Length
Takamine GN90CE-ZC's Scale Length
Takamine GN90CE-ZC's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Takamine GN93 has the longest scale: 25.4". The Takamine GN90CE-ZC is only 25.3" long. This is a 0.099999999999998'' (2.5mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Takamine GN93 Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Takamine GN93 and the Takamine GN90CE-ZC have a Asymmetrical-shaped neck. Even though this neck shape looks like a poorly-made job, it's, in fact, the neck that most naturally adapts to the arc of your hand when grabbing a guitar neck. You'll notice that the lower part of your palm makes a more pronounced, deeper curve while the upper part makes a more subtle arch. This is the shape that adapts the best to that natural arch your hand makes while playing.

Fretboard Radius

Takamine GN93 Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Takamine GN93 and the Takamine GN90CE-ZC have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Takamine GN93:
Big Hands
Small Hands
Takamine GN90CE-ZC:
Big Hands
Small Hands

Fret Size

Takamine GN93 and Takamine GN90CE-ZC Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Takamine GN93
Bending & Vibrato Ease 75
Chord Playability 85
Solo Playability 70
Playability 77
Takamine GN90CE-ZC
Bending & Vibrato Ease 75
Chord Playability 85
Solo Playability 70
Playability 77

Specs Side-by-Side

Takamine GN93 vs GN90CE-ZC
General Takamine GN93 GN90CE-ZC
Brand: Takamine Takamine
Year: 2015 2019
Strings: 6 6
Made in: China China
Series: G G
Colors: Natural Natural
Left-Handed Version: No No
Body
Type: Hollowbody Hollowbody
Body Material: Solid Spruce Solid Spruce
Sides Material: Walnut Ziricote
Back Material: Quilted Maple Ziricote
Bridge: Fixed Fixed
Neck
Neck Joint: Set Set
Tuners: Takamine Die-cast Takamine Butterbean
Fretboard: Laurel Laurel
Neck Material: Mahogany Mahogany
Decoration: Abalone Dots Abalone Dots
Scale Size: 25.4" 25.3"
Shape: Acoustic Asymmetrical C Acoustic Asymmetrical C
Frets: 20 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 12" 12"
Nut: Synthetic Bone Synthetic Bone
Nut Width: 42.8mm (1.685'') 42.5mm (1.673'')
Electronics
Bridge Pickup: TP-4TD (Preamp / Active)