Show Full Spec Comparison
| Martin 000JR-10E Shawn Mendes | 000Jr-10 | |
|---|---|---|
| General | ||
| Brand: | Martin | Martin |
| Year: | 2022 | 2021 |
| Strings: | 6 | 6 |
| Made in: | Mexico | Mexico |
| Series: | Custom & Special Editions | Junior |
| Colors: | Natural | Natural |
| Left-Handed Version: | No | Yes |
| Body | ||
| Type: | Hollowbody | Hollowbody |
| Body Material: | Solid Spruce | Solid Spruce |
| Sides Material: | Sapele | Sapele |
| Back Material: | Sapele | Sapele |
| Bridge: | FSC Certified Ebony | FSC Certified Richlite |
| Neck | ||
| Neck Joint: | Set | Set |
| Tuners: | Chrome Enclosed Gear | Chrome Enclosed Gear |
| Fretboard: | FSC Certified Ebony | FSC Certified Richlite |
| Neck Material: | FSC Certified Sipo | Select Hardwood |
| Decoration: | MOP Pattern Custom Shawn Mendes (MOP Pattern) | Mother-of-Pearl Pattern Style 28 |
| Scale Size: | 24" | 24" |
| Shape: | Acoustic Junior | Acoustic Junior |
| Frets: | 20 Medium Nickel Silver | 20 Medium Nickel Silver |
| Fretboard Radius: | 16" | 16" |
| Nut: | Ivory Tusq | Corian |
| Nut Width: | 44.5mm (1.75'') | 44.5mm (1.75'') |
| Electronics | ||
| Pickups: | Fishman Sonitone (Preamp / Active) | |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Chrome |
Reasons to Get
Martin 000JR-10E Shawn Mendes over 000Jr-10
Reasons to Get
Martin 000Jr-10 over 000JR-10E Shawn Mendes
Other Key Differences
Martin 000JR-10E Shawn Mendes vs 000Jr-10
Shared Features
Martin 000JR-10E Shawn Mendes vs 000Jr-10
Common Strengths
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
Common Weaknesses
- Pickup Alter Switch/Knob
- Locking Tuners
- High-Quality Frets
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Martin 000JR-10E Shawn Mendes:
Martin 000Jr-10:
Beginner Friendliness
Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Martin 000JR-10E Shawn Mendes- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Short scale
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Soft Strings
- Locking tuners
New Player Friendliness
Martin 000Jr-10- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Short scale
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Soft Strings
- Locking tuners
Sound Quality Comparison
The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .
Woods Used in Both
Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.
It's similar to Mahogany in both color and tone. It can produce warm tones, and it's known for its beautiful figured grain patterns. Find out more about Sapele.
Woods Used in the Martin 000JR-10E Shawn Mendes
Sipo wood is a type of hardwood that is native to Africa. Regarding its tonal properties, the low end is full and rich, while the highs are clear and articulate. This makes for a very well-rounded sound that is perfect for any style of music.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Woods Used in the Martin 000Jr-10
Hardwood is just a generic wood that can come from many species. This type of wood is used to build guitars because it provides a rich, warm sound. The wood also has good structural properties, making it durable and long-lasting.
It's very similar to Ebony, but it is much cheaper to make. The main reason is that it is made from resin-infused paper. It is very durable and soft, so it's often used for fretboards and tops.
Winner: Martin 000JR-10E Shawn Mendes.
Electronics
The Martin 000JR-10E Shawn Mendes comes with a preamp that allows you to connect it to an amp, unlike its competitor. This allows it to have more versatility and sound quality if you want to record with it or play live.
Winner:Martin 000JR-10E Shawn Mendes.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Martin 000JR-10E Shawn Mendes compares to the Martin 000Jr-10.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Mexico.
Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Martin 000JR-10E Shawn Mendes has a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
On the other hand, the Martin 000Jr-10 comes with a Corian nut. It used to be the go-to nut for Gibson, but it's slowly being replaced by Graph Tech (Tusq). It's a synthetic material made to be similar to Bone, but it doesn't have the same self-lubricating properties, and it's less resistant.
Winner: Martin 000JR-10E Shawn Mendes.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Tuners
Both come with regular tuners. Both come with Chrome Enclosed Gear.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Martin 000JR-10E Shawn Mendes
- Expensive Wood
- Ivory Tusq Nut
- Top Brand Pickups
- Electronics
- Ivory Tusq Saddle
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Martin 000Jr-10
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Expensive Woods
- No High-Quality Nut
- No Top Brand Pickups
- No Electronics
- Low-Quality Material Saddle
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 44.5mm (1.75'').
This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 24".
There are advantages and disadvantages to a short scale length like this. This guitar will be very easy to play, especially if you have small hands because the frets will be close to each other. Also, since the distance between the bridge and nut is short, the strings will have less tension, so they'll be really easy to bend. However, this also means that you won't be able to lower the action (lower the saddles and get the strings closer to the fretboard) too much or you will get fret buzz since the strings will be a bit loose.
Also, short scales give less space for the harmonics to 'breath', so this ends up making the tone of the guitar sound more 'bassy' than a loger scale where there's more separation between harmonics, which gives the tone more chime.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Martin 000JR-10E Shawn Mendes and the Martin 000Jr-10 have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Martin 000JR-10E Shawn Mendes and the Martin 000Jr-10 have the same fretboard radius of 16". This fretboard radius is really different from Stratocasters, but it's also a lot flatter than Les Paul fingerboards. It'll favor plating single notes over playing chords. This doesn't mean you can't use it for rhythm, but a more curved fretboard offers better playability for chords. Bending and sliding without losing sustain will also be more likely in a flat fretboard like this one.
Fret Size
Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.
