Swap
Swap
Ibanez PN1
Takamine P6NC
VS
Playability
78
Sound
74
Build
57
Value
85
Score
70
FIND IT ON:
Sweetwater logoReverb logo
Playability
77
Sound
85
Build
87
Value
73
Score
83
FIND IT ON:
Sweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

Ibanez PN1 vs Takamine P6NC

Reasons to Get
Ibanez PN1 over Takamine P6NC

Release Year
2017 vs 2013
From a more recent year
Neck Profile
Acoustic PN vs Acoustic Asymmetrical C
Comfortable neck that works for most people
Nut Width
1.654'' (42mm) vs 1.673'' (42.5mm)
Favors small hands, easier bar chords and other shapes
Body Shape
Parlor vs Medium Jumbo
Very small body with prominent mid tones
Scale Length
24.4'' (619.8mm) vs 25.4'' (645.2mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
9.843'' (250mm) vs 12'' (304.8mm)
More curved fretboard helpful to play chords without muting strings
Value Score
85 vs 73
Better price/quality relationship

Reasons to Get
Takamine P6NC over Ibanez PN1

Country of Manufacturing
Japan vs China
Built with higher quality standards
Neck Profile
Acoustic Asymmetrical C vs Acoustic PN
Adapts to the natural shape of your hand
Pickups Brand
Takamine vs None
Pickups from a renown brand
Nut Material
Bone vs Plastic
Good quality nut with rich tone
Top Wood
Solid vs Laminated
Helps with richer tones and louder volume
Back Wood
Solid vs Laminated
Helps with richer tones and louder volume
Number of Frets
20 vs 18
Allows to reach higher notes
Nut Width
1.673'' (42.5mm) vs 1.654'' (42mm)
Less likely to mute strings by accident and more space for fingerstyle
Body Shape
Medium Jumbo vs Parlor
Smaller than a Jumbo guitar but larger than a Thinline
Scale Length
25.4'' (645.2mm) vs 24.4'' (619.8mm)
Lower action and brighter natural tone
Fretboard Radius
12'' (304.8mm) vs 9.843'' (250mm)
Flatter fretboard makes it easier to play single notes and bend

Other Key Differences
Ibanez PN1 vs Takamine P6NC

Back Material
Nyatoh vs Flame Maple
Different Back Material
Sides Material
Nyatoh vs Maple
Different Sides Material
Saddle Material
Plastic vs Bone
Different Saddle Material
Bridge Material
Nandu Wood vs Fixed
Different Bridge Material
Neck Wood
Nyatoh vs Maple
Different Neck Wood
Fretboard Wood
Other vs Ebony
Different Fretboard Wood
Nut Material
Plastic vs Bone
Different Nut Material

Shared Features
Ibanez PN1 vs Takamine P6NC

Body Wood
Spruce
Same Body Wood
Headstock
3-3
Same Headstock
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Weaknesses

  • Solid Side Wood
  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Takamine P6NC is probably the better product overall with its final score of 83 compared to the Ibanez PN1's 70 score, which is a significant difference.

The Takamine P6NC wins when it comes to sound, build quality. On the other hand, the Ibanez PN1 has the upper hand when it comes to playability, value for the money.

If you got small hands, you'll probably feel more comfortable playing the Takamine P6NC.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Ibanez PN1 is the better choice.

The Ibanez PN1 meets 7 out of our 8 criteria items for beginner friendliness, while the Takamine P6NC meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Ibanez PN1
  • Comfortable shape
  • Easy-to-use bridge
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Short scale
  • Comfortable neck
  • Soft Strings
  • Locking tuners

New Player Friendliness

Takamine P6NC
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Soft Strings
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Ibanez PN1 Overview

  • From Ibanez's 2017 PF series
  • Made in China
  • 6 strings
  • 24.4"'' scale
  • 9.843" Fretboard Radius
  • Spruce top
  • Nyatoh back
  • Nyatoh sides
  • Nyatoh neck
  • Nandu Wood fretboard
  • Bridge pickup: (/)
  • Nandu Wood bridge
  • Acoustic PN Set neck
  • 18 Medium frets
  • Ibanez tuners
  • Compare Specs >

Takamine P6NC Overview

  • From Takamine's 2013 Pro Series 6 series
  • Made in Japan
  • 6 strings
  • 25.4"'' scale
  • 12" Fretboard Radius
  • Solid Spruce top
  • Solid Flame Maple back
  • Maple sides
  • Maple neck
  • Ebony fretboard
  • Bridge pickup: CTP-3 CoolTube (Preamp/Active)
  • Fixed bridge
  • Acoustic Asymmetrical C Set neck
  • 20 Medium frets
  • Takamine Gold tuners
  • Compare Specs >

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Spruce wood pattern used for guitar building
Spruce

Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

Woods Used in the Ibanez PN1

Nyatoh wood pattern used for guitar building
Nyatoh

Nyatoh has been replacing Mahogany for guitar building. It's fairly hard, durable, more sustentable and common than Mahogany. Find out more about Nyatoh.

Woods Used in the Takamine P6NC

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony
Flame Maple wood pattern used for guitar building
Flame Maple

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

This wood has beautiful patterns only found in specific types of maple.

Winner: Takamine P6NC.

Electronics

The Takamine P6NC comes with a preamp that allows you to connect it to an amp, unlike its competitor. This allows it to have more versatility and sound quality if you want to record with it or play live.

Winner:Takamine P6NC.

Final Sound Quality Scores

Ibanez PN1
Sustain 60
Versatility 70
Tuning Stability 65
Sound 74
Takamine P6NC
Sustain 85
Versatility 85
Tuning Stability 70
Sound 85

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Ibanez PN1 compares to the Takamine P6NC.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Ibanez PN1 is built in China while the Takamine P6NC is made in Japan.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.

Winner: Takamine P6NC

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Ibanez PN1 has a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

On the other hand, the Takamine P6NC comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

Winner: Takamine P6NC.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. The Ibanez PN1's are Ibanez while the Takamine P6NC's are Takamine Gold

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Ibanez PN1
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No Expensive Woods
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Electronics
  • Low-Quality Material Saddle
  • Laminated Top Wood
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Takamine P6NC
  • Made in Japan
  • Expensive Wood
  • Bone Nut
  • Top Brand Pickups
  • Electronics
  • Bone Saddle
  • Solid Top Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Laminated Side Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Ibanez PN1
Quality of materials 51
Features 65
Quality Control 55
Build Quality 57
Takamine P6NC
Quality of materials 81
Features 85
Quality Control 95
Build Quality 87

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Ibanez PN1 Nut Width
Ibanez PN1 Nut Width
Takamine P6NC Nut Width
Takamine P6NC Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Takamine P6NC has the wider nut with 42.5mm (1.673'') vs 42mm (1.654''). This is a 0.5mm (0.019'') difference

This means that it will be more difficult to do bar chords on the Takamine P6NC, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Ibanez PN1's Scale Length
Ibanez PN1's Scale Length
Takamine P6NC's Scale Length
Takamine P6NC's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Takamine P6NC has the longest scale: 25.4". The Ibanez PN1 is only 24.4" long. This is a 1'' (25.4mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Ibanez PN1 Neck Profile
Ibanez PN1's neck profile
Takamine P6NC Neck Profile
Takamine P6NC's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Ibanez PN1 has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

The Takamine P6NC, on the other hand, has a Asymmetrical neck. Even though this neck shape looks like a poorly-made job, it's, in fact, the neck that most naturally adapts to the arc of your hand when grabbing a guitar neck. You'll notice that the lower part of your palm makes a more pronounced, deeper curve while the upper part makes a more subtle arch. This is the shape that adapts the best to that natural arch your hand makes while playing.

Fretboard Radius

Ibanez PN1 Fingerboard Radius
Ibanez PN1's Fingerboard radius
Takamine P6NC Fingerboard Radius
Takamine P6NC's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Ibanez PN1's fingerboard radius is smaller, which means it's more curved than the Takamine P6NC's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Takamine P6NC.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Ibanez PN1 favors large hands more than the Takamine P6NC. But it's still more comfortable for people with small hands, as you can see in the score meter below.

Ibanez PN1:
Big Hands
Small Hands
Takamine P6NC:
Big Hands
Small Hands

Fret Size

Ibanez PN1 and Takamine P6NC Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Ibanez PN1
Bending & Vibrato Ease 80
Chord Playability 95
Solo Playability 60
Playability 78
Takamine P6NC
Bending & Vibrato Ease 75
Chord Playability 85
Solo Playability 70
Playability 77

Specs Side-by-Side

Ibanez PN1 vs Takamine P6NC
General Ibanez PN1 Takamine P6NC
Brand: Ibanez Takamine
Year: 2017 2013
Strings: 6 6
Made in: China Japan
Series: PF Pro Series 6
Colors: Sunburst
Left-Handed Version: No No
Body
Type: Hollowbody Hollowbody
Body Material: Spruce Solid Spruce
Sides Material: Nyatoh Maple
Back Material: Nyatoh Flame Maple
Bridge: Nandu Wood Fixed
Neck
Neck Joint: Set Set
Tuners: Ibanez Takamine Gold
Fretboard: Nandu Wood Ebony
Neck Material: Nyatoh Maple
Decoration: White dot inlay Mother-of-pearl Snowflake
Scale Size: 24.4" 25.4"
Shape: Acoustic PN Acoustic Asymmetrical C
Thickness: 1st Fret: 0.787'' (20mm) - 12th Fret: 0.827'' (21mm) 1st Fret: - 12th Fret:
Frets: 18 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 9.843" 12"
Nut: Plastic Bone
Nut Width: 42mm (1.654'') 42.5mm (1.673'')
Electronics
Bridge Pickup: CTP-3 CoolTube (Preamp / Active)