Show Full Spec Comparison
| Guild F-512E Natural | Gibson J-45 Standard 12-String | |
|---|---|---|
| General | ||
| Brand: | Guild | Gibson |
| Year: | 2019 | 2021 |
| Strings: | 12 | 12 |
| Made in: | United States | United States |
| Series: | Guild Usa | Modern Acoustic |
| Colors: | Natural, Burst | Sunburst |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Hollowbody | Hollowbody |
| Body Material: | Solid Sitka Spruce | Solid Sitka Spruce |
| Sides Material: | Rosewood | Mahogany |
| Back Material: | Rosewood | Mahogany |
| Bridge: | Indian Rosewood | Reverse Belly, Rosewood |
| Neck | ||
| Neck Joint: | Set | Set |
| Tuners: | Gotoh SE701 Open Gear in Gold | Grover Mini Rotomatic |
| Fretboard: | Ebony | Indian Rosewood |
| Neck Material: | Mahogany with Walnut Center Strip | Mahogany |
| Decoration: | V-Blocks - Mother-Of-Pearl and Abalone | Mother of Pearl Dots |
| Scale Size: | 25.625" | 24.75" |
| Shape: | Acoustic C Shape | Acoustic Slim Taper |
| Thickness: | 1st Fret: 0.787'' (20mm) - 12th Fret: 0.945'' (24mm) | 1st Fret: - 12th Fret: |
| Frets: | 20 Medium Nickel Silver | 20 Medium Nickel Silver |
| Fretboard Radius: | 12" | 12" |
| Nut: | Bone | Bone |
| Nut Width: | 47.6mm (1.875'') | 47.6mm (1.875'') |
| Electronics | ||
| Pickups: | LR Baggs Anthem with Volume, Mix, and Phase Controls (Preamp / Active) | LR Baggs VTC (Preamp / Active) |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Gold | Nickel |
Reasons to Get
Guild F-512E Natural over Gibson J-45 Standard 12-String
Reasons to Get
Gibson J-45 Standard 12-String over Guild F-512E Natural
Other Key Differences
Guild F-512E Natural vs Gibson J-45 Standard 12-String
Shared Features
Guild F-512E Natural vs Gibson J-45 Standard 12-String
Common Strengths
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- High-Quality Nut
- From a High-Quality-Standards Country
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Pickup Alter Switch/Knob
- Locking Tuners
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Guild F-512E Natural:
Gibson J-45 Standard 12-String:
Beginner Friendliness
Both meet 3 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Guild F-512E Natural- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Narrow nut
- Short scale
- Soft Strings
- Locking tuners
New Player Friendliness
Gibson J-45 Standard 12-String- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Narrow nut
- Short scale
- Soft Strings
- Locking tuners
Sound Quality Comparison
The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .
Woods Used in Both
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Woods Used in the Guild F-512E Natural
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Winner: Guild F-512E Natural.
Electronics
Both come with electronics that allow you connect them to an amplifier or interface for recording.
Winner:Tie.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Guild F-512E Natural compares to the Gibson J-45 Standard 12-String.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Bone nuts. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Tuners
Both come with regular tuners. The Guild F-512E Natural's are Gotoh SE701 Open Gear in Gold while the Gibson J-45 Standard 12-String's are Grover Mini Rotomatic
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Guild F-512E Natural
- Made in United States
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Electronics
- Bone Saddle
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Gibson J-45 Standard 12-String
- Made in United States
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Electronics
- Ivory Tusq Saddle
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 47.6mm (1.875'').
This is within the most common range of nut widths for a 12-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Guild F-512E Natural has the longest scale: 25.625". The Gibson J-45 Standard 12-String is only 24.75" long. This is a 0.875'' (22.2mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Guild F-512E Natural and the Gibson J-45 Standard 12-String have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Guild F-512E Natural and the Gibson J-45 Standard 12-String have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.
Fret Size
Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.
