Show Full Spec Comparison
| Alvarez FYM70CE | Yamaha FSX5 | |
|---|---|---|
| General | ||
| Brand: | Alvarez | Yamaha |
| Year: | 2022 | 2019 |
| Strings: | 6 | 6 |
| Made in: | Japan | Japan |
| Series: | Yairi | FG/FS Red Label |
| Colors: | Natural | Natural |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Hollowbody | Hollowbody |
| Body Material: | Solid AAA Sitka Spruce | Solid Sitka Spruce |
| Sides Material: | Rosewood | Mahogany |
| Back Material: | Rosewood | Mahogany |
| Bridge: | Ebony Direct Coupled | Ebony |
| Neck | ||
| Neck Joint: | Set | Set |
| Tuners: | Gotoh 510's Gold with Ebony Buttons | Open-Gear Chrome (Y1D) |
| Fretboard: | Ebony with 12th AA Fret Inlay | Ebony |
| Neck Material: | One piece mahogany, 50/50 Semi gloss finish, Extended neck joint | African Mahogany |
| Decoration: | Abalone Design at 12th fret | Dots |
| Scale Size: | 25" | 25" |
| Shape: | Acoustic Alvarez | Acoustic C |
| Frets: | 20 Medium Nickel Silver | 20 Medium Nickel Silver |
| Fretboard Radius: | 15.75" | 15.75" |
| Nut: | Ivory Tusq | Bone |
| Nut Width: | 44mm (1.732'') | 44mm (1.732'') |
| Electronics | ||
| Pickups: | LR Baggs VTC Element System (Preamp / Active) | Atmosfeel (Undersaddle Pickup + Contact Sensor + Mic) (Preamp / Active) |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Black & Gold | Chrome |
Reasons to Get
Alvarez FYM70CE over Yamaha FSX5
Reasons to Get
Yamaha FSX5 over Alvarez FYM70CE
Other Key Differences
Alvarez FYM70CE vs Yamaha FSX5
Shared Features
Alvarez FYM70CE vs Yamaha FSX5
Common Strengths
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- High-Quality Nut
- From a High-Quality-Standards Country
- Expensive Wood
Common Weaknesses
- Pickup Alter Switch/Knob
- Locking Tuners
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Alvarez FYM70CE:
Yamaha FSX5:
Beginner Friendliness
Both meet 4 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Alvarez FYM70CE- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Soft Strings
- Locking tuners
New Player Friendliness
Yamaha FSX5- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Soft Strings
- Locking tuners
Sound Quality Comparison
The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .
Woods Used in Both
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.
Woods Used in the Alvarez FYM70CE
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Winner: Alvarez FYM70CE.
Electronics
Both come with electronics that allow you connect them to an amplifier or interface for recording.
Winner:Tie.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Alvarez FYM70CE compares to the Yamaha FSX5.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Japan.
Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Alvarez FYM70CE has a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
On the other hand, the Yamaha FSX5 comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Tuners
Both come with regular tuners. The Alvarez FYM70CE's are Gotoh 510's Gold with Ebony Buttons while the Yamaha FSX5's are Open-Gear Chrome (Y1D)
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Alvarez FYM70CE
- Made in Japan
- Expensive Wood
- Ivory Tusq Nut
- Top Brand Pickups
- Electronics
- Ivory Tusq Saddle
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Yamaha FSX5
- Made in Japan
- Expensive Wood
- Bone Nut
- Electronics
- Bone Saddle
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Top Brand Pickups
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 44mm (1.732'').
This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25".
This scale is close to a Les Paul (24.75''), but it's slightly longer for those who want more tension of the strings and a slightly brighter sound (but not as much as with a 25.5'' Stratocaster scale).
This longer scale will also mean the frets are slightly more separated, which can affect your speed when playing. However, since this increases the tension of the strings, it will also allow you to lower the action even further without getting fret buzz. It comes at the cost of making the strings feel stiffer, which makes bending more difficult, though.
However, remember that you can also change the tension of the strings by using different string gauges.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Alvarez FYM70CE has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.
The Yamaha FSX5, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Alvarez FYM70CE and the Yamaha FSX5 have the same fretboard radius of 15.75". It's a radius that makes playing single notes (and bending, vibrato, sliding, etc) easier than on a classic Les Paul guitar. However, it's still more curved than some baritone and 7+ strings guitars.
Fret Size
Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.
