Best Electric Guitars With 17" Fingerboard Radius in 2026
Here are the top electric guitars with 17" fingerboard radius. Even compared to Les Paul guitars, this is a fretboard with a very flat curve. This means that this neck was made for playing single notes. This doesn't mean you can't use it for playing chords, but it will be more comfortable to play chords without muting strings in a more curved fretboard. Bending and sliding without losing sustain will also be more likely in a flat fretboard like this one.
After comparing the 2000+ guitars in our database, these are the best scoring ones with these characteristics. You can use our filters to the left to narrow down these results, or click on "Compare" to get a deep comparison between them. Our automated scoring system takes into account the ratings from ours users who own the guitar, and dozens of parameters to determine the build quality, playability, pickups quality, value for money, and more.
There are affiliate links on this page that may earn us a commission if you purchase after clicking. We are members of the Amazon Associates Program, and many others. However, we compare each guitar against each other under the same parameters, so this doesn't influence our scoring.
After comparing the 2000+ guitars in our database, these are the best scoring ones with these characteristics. You can use our filters to the left to narrow down these results, or click on "Compare" to get a deep comparison between them. Our automated scoring system takes into account the ratings from ours users who own the guitar, and dozens of parameters to determine the build quality, playability, pickups quality, value for money, and more.
There are affiliate links on this page that may earn us a commission if you purchase after clicking. We are members of the Amazon Associates Program, and many others. However, we compare each guitar against each other under the same parameters, so this doesn't influence our scoring.
1. Music Man Majesty 8
Compare
What our users think
- Neck profile shape: C (2 votes)
- Neck speed (thickness): Herman Li fast (3 votes)
- Pickups noise: Noiseless (3 votes)
- Pickups power: Hot (3 votes)
Show All Specs
| Music Man Majesty 8 | ||
|---|---|---|
| General | ||
| Brand: | Music Man | |
| Year: | 2021 | |
| Configuration: | HH | |
| Strings: | 8 | |
| Made in: | United States | |
| Series: | John Petrucci | |
| Colors: | Green | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Basswood Wings, Mahogany through neck | |
| Bridge: | Music Man Custom piezo hardtail | |
| Neck | ||
| Neck Joint: | Neck-Through | |
| Tuners: | Schaller M6-IND locking (Chrome) | |
| Fretboard: | Ebony | |
| Neck Material: | Mahogany | |
| Decoration: | Atlante Majesty Inlays | |
| Scale Size: | 27" to 25.5" | |
| Shape: | John Petrucci | |
| Frets: | 24 Medium Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Compensated | |
| Nut Width: | 57.2mm (2.252'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio Dreamcatcher (Humbucker / Passive) | |
| Neck Pickup: | DiMarzio Rainmaker (Humbucker / Passive) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split, Multi-Voicing | |
| Volume Controls: | 2 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Strengths & Weaknesses
Music Man Majesty 8
Music Man Majesty 8
- Stainless Steel Frets
- Locking Tuners
- Made in United States
- Expensive Wood
- Compensated Nut
- Top Brand Pickups
- Neck-Through Build
- Coil Split, Multi-Voicing Pickups
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
2. Ibanez RGR5221 Prestige
Compare
What our users think
- Neck access to high frets: Very Easy (4 votes)
- Fret edges: Smooth (3 votes)
- Tuning stability: Holds tune well (3 votes)
- Weight: Slightly heavy (4 votes)
- Neck profile shape: D (19 votes)
- Neck speed (thickness): Herman Li fast (18 votes)
- Pickups noise: Noiseless (4 votes)
- Pickups power: Hot (4 votes)
Show All Specs
| Ibanez RGR5221 Prestige | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2020 | |
| Configuration: | HH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Orange | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Ash | |
| Type: | Solid Body | |
| Body Material: | African Mahogany | |
| Bridge: | Gibraltar Standard II | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh MG-T locking machine heads | |
| Fretboard: | Bound Macassar Ebony | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Off-set Mother of Pearl dot | |
| Scale Size: | 25.5" | |
| Shape: | Super Wizard | |
| Thickness: | 1st Fret: 0.67'' (17mm) - 12th Fret: 0.75'' (19.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Black Tusq XL | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | Bare Knuckle Brute Force (Humbucker / Passive) | |
| Neck Pickup: | Bare Knuckle Brute Force (Humbucker / Passive) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez RGR5221 Prestige
Ibanez RGR5221 Prestige
- Stainless Steel Frets
- Locking Tuners
- Made in Japan
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Coil Split Pickups
- Luminescent Inlay
- No Neck-Through Build
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
3. Ibanez PIA3761C
Compare
What our users think
- Neck access to high frets: Very Easy (1 vote)
- Fret edges: Smooth (1 vote)
- Tuning stability: Won't get out of tune (1 vote)
- Weight: Slightly heavy (1 vote)
- Neck profile shape: D (1 vote)
- Neck speed (thickness): Fast (1 vote)
- Pickups noise: Noiseless (1 vote)
- Pickups power: Hot (1 vote)
Show All Specs
| Ibanez PIA3761C | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2022 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | PIA/JEM/UV | |
| Colors: | Blue | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Alder | |
| Bridge: | Edge tremolo | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Rosewood | |
| Neck Material: | Maple/Walnut | |
| Decoration: | PIA Blossom | |
| Scale Size: | 25.5" | |
| Shape: | PIA | |
| Thickness: | 1st Fret: 0.71'' (18mm) - 12th Fret: 0.79'' (20.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio UtoPIA (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio UtoPIA (Humbucker / Passive) | |
| Neck Pickup: | DiMarzio UtoPIA (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Strengths & Weaknesses
Ibanez PIA3761C
Ibanez PIA3761C
- Stainless Steel Frets
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Luminescent Inlay
- Tremolo
- Retainer Bar
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
4. Ibanez RG5328 Prestige
Compare
What our users think
- Neck access to high frets: Easy (1 vote)
- Fret edges: Smooth (1 vote)
- Tuning stability: Holds tune well (1 vote)
- Weight: Heavy (1 vote)
- Neck profile shape: D (1 vote)
- Neck speed (thickness): Fast (1 vote)
- Pickups noise: Slightly Noisy (1 vote)
- Pickups power: Slightly Hot (1 vote)
Show All Specs
| Ibanez RG5328 Prestige | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2019 | |
| Configuration: | HH | |
| Strings: | 8 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Black | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Ash | |
| Bridge: | Gibraltar Standard II-8 | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh MG-T locking machine heads | |
| Fretboard: | Bound Macassar Ebony | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Mother of Pearl dot | |
| Scale Size: | 27" | |
| Shape: | Wizard-8 | |
| Thickness: | 1st Fret: 0.75'' (19.1mm) - 12th Fret: 0.83'' (21.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Black Tusq XL | |
| Nut Width: | 55mm (2.165'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio Fusion Edge 8 (Humbucker / Passive) | |
| Neck Pickup: | DiMarzio Fusion Edge 8 (Humbucker / Passive) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez RG5328 Prestige
Ibanez RG5328 Prestige
- Stainless Steel Frets
- Locking Tuners
- Made in Japan
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Coil Split Pickups
- Luminescent Inlay
- No Neck-Through Build
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
5. Ibanez RG5170G Prestige
Compare
What our users think
- Neck access to high frets: Very Easy (1 vote)
- Fret edges: Smooth (1 vote)
- Tuning stability: Won't get out of tune (1 vote)
- Weight: Lightweight (1 vote)
- Neck profile shape: D (19 votes)
- Neck speed (thickness): Herman Li fast (18 votes)
- Pickups noise: Noiseless (30 votes)
- Pickups power: Hot (30 votes)
Show All Specs
| Ibanez RG5170G Prestige | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2020 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Black, Silver | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Basswood | |
| Bridge: | Lo-Pro Edge tremolo | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Bound Macassar Ebony | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Off-set Mother of Pearl dot | |
| Scale Size: | 25.5" | |
| Shape: | Super Wizard | |
| Thickness: | 1st Fret: 0.67'' (17mm) - 12th Fret: 0.75'' (19.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | Fishman Fluence Modern Ceramic (Humbucker / Active) | |
| Middle Pickup: | Fishman Fluence Single-Width (Single Coil / Active) | |
| Neck Pickup: | Fishman Fluence Modern Alnico (Humbucker / Active) | |
| Switch: | 5 | |
| Knobs: | Bell | |
| Pickup Mods: | Multi-Voicing | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Gold | |
Strengths & Weaknesses
Ibanez RG5170G Prestige
Ibanez RG5170G Prestige
- Stainless Steel Frets
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Multi-Voicing Pickups
- Luminescent Inlay
- Tremolo
- Retainer Bar
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
6. Ibanez RG5121 Prestige
Compare
What our users think
- Neck access to high frets: Easy (1 vote)
- Fret edges: Smooth (1 vote)
- Tuning stability: Won't get out of tune (1 vote)
- Weight: Lightweight (1 vote)
- Neck profile shape: D (19 votes)
- Neck speed (thickness): Herman Li fast (18 votes)
- Pickups noise: Noiseless (30 votes)
- Pickups power: Hot (30 votes)
Show All Specs
| Ibanez RG5121 Prestige | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2019 | |
| Configuration: | HH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Blue, Red | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | African Mahogany | |
| Bridge: | Gibraltar Standard II | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh MG-T locking machine heads | |
| Fretboard: | Bound Macassar Ebony | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Off-set Mother of Pearl dot | |
| Scale Size: | 25.5" | |
| Shape: | Super Wizard | |
| Thickness: | 1st Fret: 0.67'' (17mm) - 12th Fret: 0.75'' (19.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Black Tusq XL | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | Fishman Fluence Modern Ceramic (Humbucker / Active) | |
| Neck Pickup: | Fishman Fluence Modern Alnico (Humbucker / Active) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Multi-Voicing | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez RG5121 Prestige
Ibanez RG5121 Prestige
- Stainless Steel Frets
- Locking Tuners
- Made in Japan
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Multi-Voicing Pickups
- Luminescent Inlay
- No Neck-Through Build
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
7. Ibanez RG5120M Prestige
Compare
What our users think
- Neck access to high frets: Easy (2 votes)
- Fret edges: Smooth (4 votes)
- Tuning stability: Holds tune well (2 votes)
- Weight: Heavy (3 votes)
- Neck profile shape: D (19 votes)
- Neck speed (thickness): Herman Li fast (18 votes)
- Pickups noise: Noiseless (30 votes)
- Pickups power: Hot (30 votes)
Show All Specs
| Ibanez RG5120M Prestige | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2019 | |
| Configuration: | HH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Blue | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Ash | |
| Type: | Solid Body | |
| Body Material: | African Mahogany | |
| Bridge: | Lo-Pro Edge tremolo | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Bound Birdseye Maple | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Off-set Mother of Pearl dot | |
| Scale Size: | 25.5" | |
| Shape: | Super Wizard | |
| Thickness: | 1st Fret: 0.67'' (17mm) - 12th Fret: 0.75'' (19.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | Fishman Fluence Modern Ceramic (Humbucker / Active) | |
| Neck Pickup: | Fishman Fluence Modern Ceramic (Humbucker / Active) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Multi-Voicing | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez RG5120M Prestige
Ibanez RG5120M Prestige
- Stainless Steel Frets
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Multi-Voicing Pickups
- Luminescent Inlay
- Tremolo
- Retainer Bar
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
8. Ibanez PIA3761
Compare
What our users think
- Neck profile shape: D (1 vote)
- Neck speed (thickness): Fast (1 vote)
- Pickups noise: Noiseless (1 vote)
- Pickups power: Hot (1 vote)
Show All Specs
| Ibanez PIA3761 | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2020 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | PIA/JEM/UV | |
| Colors: | White, Black | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Alder | |
| Bridge: | Edge tremolo | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Rosewood | |
| Neck Material: | Maple/Walnut | |
| Decoration: | PIA Blossom | |
| Scale Size: | 25.5" | |
| Shape: | PIA | |
| Thickness: | 1st Fret: 0.71'' (18mm) - 12th Fret: 0.79'' (20.1mm) | |
| Frets: | 24 Jumbo Stainless Steel | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio UtoPIA (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio UtoPIA (Humbucker / Passive) | |
| Neck Pickup: | DiMarzio UtoPIA (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Gold | |
Strengths & Weaknesses
Ibanez PIA3761
Ibanez PIA3761
- Stainless Steel Frets
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Luminescent Inlay
- Tremolo
- Retainer Bar
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
All Prices
9. Ibanez JCRG2103 j.custom
Compare
What our users think
- Pickups noise: Noiseless (18 votes)
- Pickups power: Hot (17 votes)
Show All Specs
| Ibanez JCRG2103 j.custom | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2021 | |
| Configuration: | HH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Blue | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Exotic Maple & Gold Resin | |
| Type: | Solid Body | |
| Body Material: | African Mahogany | |
| Bridge: | Edge | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Ebony | |
| Neck Material: | 3pc Wenge/Purpleheart | |
| Decoration: | Blue Resin dot | |
| Scale Size: | 25.5" | |
| Shape: | RG j.custom Wizard | |
| Thickness: | 1st Fret: 0.71'' (18mm) - 12th Fret: 0.79'' (20.1mm) | |
| Frets: | 24 Jumbo Gold | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio The Tone Zone (Humbucker / Passive) | |
| Neck Pickup: | DiMarzio Air Norton (Humbucker / Passive) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | Yes | |
| Hardware Color: | Gold | |
Strengths & Weaknesses
Ibanez JCRG2103 j.custom
Ibanez JCRG2103 j.custom
- Gold Frets
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Coil Split Pickups
- Luminescent Inlay
- Tremolo
- Retainer Bar
- Strap Lock
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
All Prices
10. Ibanez RG8870
Compare
What our users think
- Neck access to high frets: Very Easy (1 vote)
- Fret edges: Smooth (1 vote)
- Tuning stability: Holds tune well (1 vote)
- Weight: Heavy (1 vote)
- Neck profile shape: D (19 votes)
- Neck speed (thickness): Herman Li fast (18 votes)
- Pickups noise: Noiseless (18 votes)
- Pickups power: Hot (17 votes)
Show All Specs
| Ibanez RG8870 | ||
|---|---|---|
| General | ||
| Brand: | Ibanez | |
| Year: | 2023 | |
| Configuration: | HSH | |
| Strings: | 6 | |
| Made in: | Japan | |
| Series: | RG | |
| Colors: | Black | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | AAA Flamed Maple (4mm) | |
| Type: | Solid Body | |
| Body Material: | Alder | |
| Bridge: | Lo-Pro Edge | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Gotoh machine heads | |
| Fretboard: | Macassar Ebony | |
| Neck Material: | Maple/Wenge | |
| Decoration: | Tree of Life | |
| Scale Size: | 25.5" | |
| Shape: | Super Wizard | |
| Thickness: | 1st Fret: 0.67'' (17mm) - 12th Fret: 0.75'' (19.1mm) | |
| Frets: | 24 Jumbo | |
| Fretboard Radius: | 17" | |
| Nut: | Locking | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | DiMarzio The Tone Zone (Humbucker / Passive) | |
| Middle Pickup: | DiMarzio True Velvet (Single Coil / Passive) | |
| Neck Pickup: | DiMarzio PAF 36th Anniversary (Humbucker / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | Yes | |
| Hardware Color: | Black | |
Strengths & Weaknesses
Ibanez RG8870
Ibanez RG8870
- Made in Japan
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Coil Split Pickups
- Tremolo
- Retainer Bar
- Strap Lock
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
