Sire Marcus Miller Z3 5-String - Overview and Best Prices
- From Sire's 2024 Z series
- Marcus Miller Signature
- Made in Indonesia
- 5 strings
- 34"'' scale
- 12" Fretboard Radius
- Mahogany body
- Hard Maple neck
- Hardmaple Edgeless (Rolled Fretboard Edges) fretboard
- Bridge pickup: Sire Standard MM (Humbucker/Passive)
- 1 volume and 3 tone Dome knobs
- Sire Standard MM bridge
- Bass C-Shape Bolt-On neck
- 22 Medium Jumbo frets
- Standard Open Gear tuners
- Side-By-Side Comparison
Show Specs
| Sire Marcus Miller Z3 5-String | ||
|---|---|---|
| General | ||
| Brand: | Sire | |
| Year: | 2024 | |
| Configuration: | H | |
| Strings: | 5 | |
| Made in: | Indonesia | |
| Series: | Z | |
| Colors: | White, Black, Blue, Pink | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Mahogany | |
| Bridge: | Sire Standard MM | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Standard Open Gear | |
| Fretboard: | Hardmaple Edgeless (Rolled Fretboard Edges) | |
| Neck Material: | Hard Maple | |
| Decoration: | White Dot (Rosewood FB) or Black Dot (Maple FB) | |
| Scale Size: | 34" | |
| Shape: | Bass C-Shape | |
| Frets: | 22 Medium Jumbo | |
| Fretboard Radius: | 12" | |
| Nut: | Bone | |
| Nut Width: | 45mm (1.772'') | |
| Electronics | ||
| Bridge Pickups: | Sire Standard MM (Humbucker / Passive) | |
| Switch: | 0 | |
| Knobs: | Dome | |
| Volume Controls: | 1 | |
| Tone Controls: | 3 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
Sire Marcus Miller Z3 5-String
- Expensive Wood
- Bone Nut
- Active/Passive Preamp
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Top Brand Pickups
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Price Overview
Its average competitor's price is $740, which means that the Sire Marcus Miller Z3 5-String is around 32% cheaper than the competition. This takes into account all instruments of the same category in our database with 5 strings and Fixed bridge that are made in Indonesia.
User Reviews & Feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
VoteOften Compared With
Hand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Sire Marcus Miller Z3 5-String's construction favors people with relatively small hands.
Nevertheless, this comes down in the end to personal preference. Make sure you test this bass—or another one with similar characteristics—before buying.
Beginner Friendliness
The Sire Marcus Miller Z3 5-String meets 3 out of our 6 criteria items for beginner friendliness, which means that it's not bad for beginners, but it could be better. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
Sire Marcus Miller Z3 5-String- Comfortable shape
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
Videos
Playability
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the Sire Marcus Miller Z3 5-String's 34" scale length compared to other common sizes:
This is considered a long scale bass, and it's the most popular choice for several reasons. Even though it might be more difficult to play than short scale basses due to their increased string tension, their punchier low-end results in a clear and defined bass tone that can cut through in a mix, making them well-suited for genres like rock, metal, and funk.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.
Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The Sire Marcus Miller Z3 5-String has a 12" fingerboard radius.
Here's an image comparing this fretboard radius to other popular choices:
This is the same radius that Gibson uses in most of their guitars. When compare to the other popular radius of Fender Stratocasters, you can see that it's a lot flatter. Guitars with this radius are usually made to bring a good balance between single-note and chord playing.
Compound radius fingerboards give the best of both worlds. Unfortunately, the Sire Marcus Miller Z3 5-String has the same radius across the board.
Playability compared to main competitors
Nut Width
The Sire Marcus Miller Z3 5-String has a nut width of 45mm (1.772''). This is within the most common range of nut widths for a 5-string bass. This is what most players find as a balanced width for both playing chords and single notes across different strings. If you have an "average" hand size, or you're not sure what nut width you'd like, this is a safe bet.
Frets
The Sire Marcus Miller Z3 5-String has 22 frets. Even though 24 frets has become really popular, there's still a good reason to get fewer frets; the pickup at the neck position will be further away from the bridge. This makes the neck pickup achieve a warmer tone. You might want this if you're playing Jazz or similar genres.
However, if you don't care about the warmer neck pickup, more frets will always be better. It's always nice to have the option to play higher notes if you want to.
It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The Sire Marcus Miller Z3 5-String's frets are Medium Jumbo size. These sit somewhere between a Jumbo and a Medium fret. They're not quite as tall as a full Jumbo, so you'll still feel the fretboard, but you won't feel it as much as with medium frets. This is a good size if you want to make it easy to press the strings but would also like a little bit of ''feedback'' to know when to stop pressing so the notes don't go out of pitch.
Playability Score
Tone
Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.
Wood
Mahogany Body: This is the type of wood found in many top-of-the-line guitars, so that's a positive point for the build quality. This red-looking wood Mahogany is found in Africa and Central America and has great sustain and a warm tone due to its high density. The downside about this type of wood is that it's relatively heavy.
Maple Neck and Fretboard: This is one of the most popular types of wood used in all kinds of guitars. It's heavy, strong and compact, which makes it great for necks. However, it's also used for fretboards, bodies and tops due to its light color, resistance and beautiful patterns. When it comes to tone, it highlights the mid and high frequencies.
Pickups
Unfortunately, it doesn't come with pickups from one of the top brands. This doesn't mean you will get bad pickups, but you might want to consider a pickup upgrade after some time.
These are passive pickups, so you can expect a rounder sound and a moderade level of output.
Preamp
The preamp is an electronic circuit that serves as an intermediary between the bass's pickups and the amplifier. Its primary function is to boost and shape the bass's raw signal before it reaches the amplifier. This allows for greater control over the bass's tone, volume, and other sound characteristics. Preamps often include tone controls, equalization settings, and sometimes even onboard effects, enabling bassists to tailor their sound to their preferences and the musical context.
This bass has a Active/Passive preamp. This means it combines both passive and active electronics in one instrument. This versatile setup allows the player to switch between passive and active modes, providing a wide range of tonal options. In passive mode, the bass relies on traditional passive pickups and tone controls for a warm and organic sound. In active mode, the onboard preamp circuit is engaged, offering enhanced EQ shaping capabilities and sometimes a signal boost. This flexibility caters to a broader spectrum of musical styles and playing preferences, as it allows the bassist to switch between the classic, vintage tone of passive operation and the more versatile and finely tuned active mode, all within the same instrument.
The Sire Marcus Miller Z3 5-String's configuration is H. A single humbucking pickup will give you all the space you need for picking, and it might give you a bit more sustain since less magnetic fields are messing with the strings' vibrations. However, you won't have the same versatility as with other guitars with more pickups. It's recommended if you want to use it mainly for high-output riffs.
More with the same pickups
Versatility
Unfortunately, it doesn't come with more options for coil split or coil tapping. This makes it less versatile than some competitors.
What music genre is it good for?
As a 5 strings, Solid Body bass with H configuration and Passive pickups, we'd recommend it for genres like Hard Rock or similar. However, you can use almost any bass for any genre. This is just the typical type of music for this particular one.
Sound Score
Build Quality
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The Sire Marcus Miller Z3 5-String is made in Indonesia. Many people prefer the quality of an Indonesian guitar over a Chinese. Respectable brands like Epiphone, Ibanez and Schecter are building in this country because of the great quality and lower price. Some people like to compare them to the ones built in Japan during the 80s, when Japanese guitar makers made a name for themselves.
Bridge
Sire Standard MM: The advantage of fixed bridges is that they don't require any kind of set-up. This makes it extremely easy when changing strings because you don't need to adjust anything besides tuning the guitar. Also, the fact that the bridge is directly attached to the body will help to increase sustain. The disadvantage is the lack of versatility since you can't create the same vibrato effects as with tremolo bridges.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your bass. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the Sire Marcus Miller Z3 5-String has a Bone nut. This material is one of the highest quality you can get. It provides excellent sustain and tune stability if cut well. The only disadvantage is that it's an organic material, so it's not consistent. Two different bone nuts, even if made from the same bone, will probably sound slightly different. However, bear in mind that this is only relevant when playing open strings.
Neck Joint
The neck joint is the part where the neck of the bass meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.
This bass has a Bolt-On neck joint. Even though this type of neck was looked down upon for a long time, nowadays bolt-on necks are well built and provide just as much sustain as any other join method. First of all, it's cheap to make because it consists of simply 4 bolts that attach the neck to the body. And you can travel with the guitar more easily, swap out the neck if you damage it, or upgrade to a more comfortable neck later on.
