Sire Marcus Miller V3P 5-String - Overview and Best Prices
- From Sire's 2023 V series
- Marcus Miller Signature
- Made in Indonesia
- 5 strings
- 34"'' scale
- 9.5" Fretboard Radius
- Mahogany body
- Hard Maple neck
- Rosewood fretboard
- Bridge pickup: Marcus Standard-J Revolution (Single Coil/Passive)
- Neck pickup: Marcus Standard-J Revolution (Single Coil/Passive)
- 2 volume and 1 tone Dome knobs
- Marcus Miller Standard Bass with Body Thru Hole bridge
- Bass C-Shape Bolt-On neck
- 22 Medium frets
- Standard Open-Gear tuners
- Weight between 9.5lbs (4.3kgs) and 10.5lbs (4.8kgs)
- Side-By-Side Comparison
Show Specs
Sire Marcus Miller V3P 5-String | ||
---|---|---|
General | ||
Brand: | Sire | |
Year: | 2023 | |
Configuration: | SS | |
Strings: | 5 | |
Made in: | Indonesia | |
Series: | V | |
Colors: | Sunburst, Black, Blue, Red, Yellow | |
Left-Handed Version: | Yes | |
Body | ||
Type: | Solid Body | |
Body Material: | Mahogany | |
Bridge: | Marcus Miller Standard Bass with Body Thru Hole | |
Neck | ||
Neck Joint: | Bolt-On | |
Tuners: | Standard Open-Gear | |
Fretboard: | Rosewood | |
Neck Material: | Hard Maple | |
Decoration: | White Pearl Dot | |
Scale Size: | 34" | |
Shape: | Bass C-Shape | |
Frets: | 22 Medium | |
Fretboard Radius: | 9.5" | |
Nut: | Bone | |
Nut Width: | 46mm (1.811'') | |
Electronics | ||
Bridge Pickups: | Marcus Standard-J Revolution (Single Coil / Passive) | |
Neck Pickup: | Marcus Standard-J Revolution (Single Coil / Passive) | |
Switch: | 0 | |
Knobs: | Dome | |
Volume Controls: | 2 | |
Tone Controls: | 1 | |
Hardware | ||
Strap Lock: | No | |
Hardware Color: | Chrome |
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
Sire Marcus Miller V3P 5-String
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Active Preamp
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Price Overview
Its average competitor's price is $730, which means that the Sire Marcus Miller V3P 5-String is around 36% cheaper than the competition. This takes into account all instruments of the same category in our database with 5 strings and Fixed bridge that are made in Indonesia.
User Reviews & Feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
VoteHand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Sire Marcus Miller V3P 5-String's construction favors people with relatively big hands.
Nevertheless, this comes down in the end to personal preference. Make sure you test this bass—or another one with similar characteristics—before buying.
Beginner Friendliness
The Sire Marcus Miller V3P 5-String meets 4 out of our 6 criteria items for beginner friendliness, which means that it's a good bass to start with as a complete beginner. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
Sire Marcus Miller V3P 5-String- Comfortable shape
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Narrow nut
- Short scale
Videos
How Lightweight is it?
We found that the Sire Marcus Miller V3P 5-String weighs between 9.5lbs (4.3kgs) and 10.5lbs (4.8kgs). This was recorded from some online retailers that publish the weight of the instruments they sell.
Playability
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the Sire Marcus Miller V3P 5-String's 34" scale length compared to other common sizes:
This is considered a long scale bass, and it's the most popular choice for several reasons. Even though it might be more difficult to play than short scale basses due to their increased string tension, their punchier low-end results in a clear and defined bass tone that can cut through in a mix, making them well-suited for genres like rock, metal, and funk.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.
Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The Sire Marcus Miller V3P 5-String has a 9.5" fingerboard radius.
Here's an image comparing this fretboard radius to other popular choices:
This is the most common radius for Stratocaster guitars. It's considered curved when compared to most other models. This allows you to play chords very easily without muting strings accidentally and gives you more space between strings for fingerpicking. However, this curve also gives the guitar less allowance for lower action. If you bend too hard at the high frets, some of your notes might get muted because the curve will make the string fret out.
Compound radius fingerboards give the best of both worlds. Unfortunately, the Sire Marcus Miller V3P 5-String has the same radius across the board.
Playability compared to main competitors
Nut Width
The Sire Marcus Miller V3P 5-String has a nut width of 46mm (1.811''). This is considered a wide width for a 5-string bass. A wider nut provides more space between the strings, making it easier for players to execute techniques like slap bass and tapping, which require extra room for precision. However, players with smaller hands might find it challenging to comfortably reach across the wider fretboard, as it requires a wider stretch between the fingers.
Frets
The Sire Marcus Miller V3P 5-String has 22 frets. Even though 24 frets has become really popular, there's still a good reason to get fewer frets; the pickup at the neck position will be further away from the bridge. This makes the neck pickup achieve a warmer tone. You might want this if you're playing Jazz or similar genres.
However, if you don't care about the warmer neck pickup, more frets will always be better. It's always nice to have the option to play higher notes if you want to.
It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The Sire Marcus Miller V3P 5-String's frets are Medium size. With medium frets, you can feel the fretboard more than with jumbo frets, but it's still easier to press the strings cleanly than with small frets; notes might change their pitch just slightly if you press hard on the fret. Also, if you need to do some fret leveling after years of playing, you'll have some room to sand them down without having to replace them.
Playability Score
Tone
Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.
Wood
Mahogany Body: This is the type of wood found in many top-of-the-line guitars, so that's a positive point for the build quality. This red-looking wood Mahogany is found in Africa and Central America and has great sustain and a warm tone due to its high density. The downside about this type of wood is that it's relatively heavy.
Maple Neck: This is one of the most popular types of wood used in all kinds of guitars. It's heavy, strong and compact, which makes it great for necks. However, it's also used for fretboards, bodies and tops due to its light color, resistance and beautiful patterns. When it comes to tone, it highlights the mid and high frequencies.
Rosewood Fretboard: Since the ban of Brazillian Rosewood, this has become a rare and expensive wood. It's not usually used for guitar bodies because of this, and also because it's heavy. Instead, it's used mainly for fretboards. Sometimes it's also used for necks because it's an extremely hard wood (even harder than maple). Its tonality tends to favor warm tones.
Pickups
This bass comes with pickups from one of the top brands: Marcus. So you can expect well built pickups with great sound that shouldn't need an upgrade anytime soon.
These are passive pickups, so you can expect a rounder sound and a moderade level of output.
Preamp
The preamp is an electronic circuit that serves as an intermediary between the bass's pickups and the amplifier. Its primary function is to boost and shape the bass's raw signal before it reaches the amplifier. This allows for greater control over the bass's tone, volume, and other sound characteristics. Preamps often include tone controls, equalization settings, and sometimes even onboard effects, enabling bassists to tailor their sound to their preferences and the musical context.
This bass has a Passive preamp. A bass with a passive preamp lacks an onboard electronic circuit for tone shaping and signal boosting. Instead, it relies solely on passive pickups and basic tone controls, typically consisting of volume and tone knobs. Passive preamps don't require an external power source like batteries, making them low-maintenance and dependable. While they offer a simpler and more straightforward tonal character, passive basses are appreciated for their warm and vintage sound, often favored in genres like classic rock, blues, and funk. They are an excellent choice for musicians who value the simplicity and timeless appeal of their instrument's tone without the need for active electronic components.
The Sire Marcus Miller V3P 5-String's configuration is SS. This is the classic Telecaster configuration and it's used mainly for playing clean or with low-gain distortion. It doesn't give you as much versatility as a Strat SSS configuration, but you might like the cleaner look of a guitar body with fewer pickups.
More with the same pickups
Versatility
Unfortunately, it doesn't come with more options for coil split or coil tapping. This makes it less versatile than some competitors.
What music genre is it good for?
As a 5 strings, Solid Body bass with SS configuration and Passive pickups, we'd recommend it for genres like Jazz or similar. However, you can use almost any bass for any genre. This is just the typical type of music for this particular one.
Sound Score
Build Quality
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The Sire Marcus Miller V3P 5-String is made in Indonesia. Many people prefer the quality of an Indonesian guitar over a Chinese. Respectable brands like Epiphone, Ibanez and Schecter are building in this country because of the great quality and lower price. Some people like to compare them to the ones built in Japan during the 80s, when Japanese guitar makers made a name for themselves.
Bridge
Marcus Miller Standard Bass with Body Thru Hole: The advantage of fixed bridges is that they don't require any kind of set-up. This makes it extremely easy when changing strings because you don't need to adjust anything besides tuning the guitar. Also, the fact that the bridge is directly attached to the body will help to increase sustain. The disadvantage is the lack of versatility since you can't create the same vibrato effects as with tremolo bridges.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your bass. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the Sire Marcus Miller V3P 5-String has a Bone nut. This material is one of the highest quality you can get. It provides excellent sustain and tune stability if cut well. The only disadvantage is that it's an organic material, so it's not consistent. Two different bone nuts, even if made from the same bone, will probably sound slightly different. However, bear in mind that this is only relevant when playing open strings.
Neck Joint
The neck joint is the part where the neck of the bass meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.
This bass has a Bolt-On neck joint. Even though this type of neck was looked down upon for a long time, nowadays bolt-on necks are well built and provide just as much sustain as any other join method. First of all, it's cheap to make because it consists of simply 4 bolts that attach the neck to the body. And you can travel with the guitar more easily, swap out the neck if you damage it, or upgrade to a more comfortable neck later on.