Sire Larry Carlton L5 - Overview and Best Prices
- 1 Prices - New from $599 >
- From Sire's 2024 L series
- Made in Indonesia
- 6 strings
- 24.75"'' scale
- 12" Fretboard Radius
- Swamp Ash body
- Hard Maple neck
- Hard Maple Edgeless (Rolled Fretboard Edges) fretboard
- Bridge pickup: LC Lipstick Tube Single Coil (Single Coil/Passive)
- Middle pickup: LC Lipstick Tube Single Coil (Single Coil/Passive)
- Neck pickup: LC Lipstick Tube Single Coil (Single Coil/Passive)
- 1 volume and 1 tone Dome knobs
- 5-way Switch
- Tune-O-Matic with String Body Thru bridge
- C-Shape Bolt-On neck
- 22 Medium Jumbo frets
- LC Vintage tuners
- Side-By-Side Comparison
Show Specs
| Sire Larry Carlton L5 | ||
|---|---|---|
| General | ||
| Brand: | Sire | |
| Year: | 2024 | |
| Configuration: | SSS | |
| Strings: | 6 | |
| Made in: | Indonesia | |
| Series: | L | |
| Colors: | Sunburst, Natural | |
| Left-Handed Version: | Yes | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Swamp Ash | |
| Bridge: | Tune-O-Matic with String Body Thru | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | LC Vintage | |
| Fretboard: | Hard Maple Edgeless (Rolled Fretboard Edges) | |
| Neck Material: | Hard Maple | |
| Decoration: | BK/Abalone Rounded-rectangular Block | |
| Scale Size: | 24.75" | |
| Shape: | C-Shape | |
| Thickness: | 1st Fret: 0.9'' (22.9mm) - 12th Fret: 0.94'' (23.9mm) | |
| Frets: | 22 Medium Jumbo | |
| Fretboard Radius: | 12" | |
| Nut: | Bone | |
| Nut Width: | 43mm (1.693'') | |
| Electronics | ||
| Bridge Pickups: | LC Lipstick Tube Single Coil (Single Coil / Passive) | |
| Middle Pickup: | LC Lipstick Tube Single Coil (Single Coil / Passive) | |
| Neck Pickup: | LC Lipstick Tube Single Coil (Single Coil / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Show Diagram
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
Sire Larry Carlton L5
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Price Overview
Its average competitor's price is $800, which means that the Sire Larry Carlton L5 is around 25% cheaper than the competition. This takes into account all instruments of the same category in our database with 6 strings and Fixed bridge that are made in Indonesia.
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
User Reviews & Feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
VoteOften Compared With
Hand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Sire Larry Carlton L5's construction is balanced for most hand sizes.
Nevertheless, this comes down in the end to personal preference. Make sure you test this guitar—or another one with similar characteristics—before buying.
Beginner Friendliness
The Sire Larry Carlton L5 meets 4 out of our 8 criteria items for beginner friendliness, which means that it's not bad for beginners, but it could be better. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
Sire Larry Carlton L5- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
Videos
Playability
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the Sire Larry Carlton L5's 24.75" scale length compared to other common sizes:
This is the scale length used in most Gibson guitars. If you like the playability of a Gibson, this guitar will feel pretty similar. It's a lot shorter than the typical Stratocaster (25.5'')
As you can see from the picture above, a shorter scale length also means shorter separation between frets. If you got really small hands, you probably will feel more comfortable playing this guitar than a Fender Stratocaster.
This scale length also allows for easier bends and vibratos because the strings will have lower tension due to the shorter scale.
Finally, another thing affected by scale length is tone. A shorter scale will give less room for the harmonics, thus resulting in a warmer, more 'bassy' tone.
Still, remember that you string gauge plays an important part in all of this. A lighter gauge will make it easier to perform bends, vibratos and will also give you a brighter tone.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
The Sire Larry Carlton L5's neck thickness is approximately 0.9'' (22.9mm) at the first fret, and 0.94'' (23.9mm) at the twelfth.
These measurements were taken either from the official Sire website, or, in case this information wasn't provided, by researching multiple online marketplaces and forums where owners of this model have posted their measurements.
It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.
Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The Sire Larry Carlton L5 has a 12" fingerboard radius.
Here's an image comparing this fretboard radius to other popular choices:
This is the same radius that Gibson uses in most of their guitars. When compare to the other popular radius of Fender Stratocasters, you can see that it's a lot flatter. Guitars with this radius are usually made to bring a good balance between single-note and chord playing.
Compound radius fingerboards give the best of both worlds. Unfortunately, the Sire Larry Carlton L5 has the same radius across the board.
Playability compared to main competitors
Nut Width
The Sire Larry Carlton L5 has a nut width of 43mm (1.693''). This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Frets
The Sire Larry Carlton L5 has 22 frets. Even though 24 frets has become really popular, there's still a good reason to get fewer frets; the pickup at the neck position will be further away from the bridge. This makes the neck pickup achieve a warmer tone. You might want this if you're playing Jazz or similar genres.
However, if you don't care about the warmer neck pickup, more frets will always be better. It's always nice to have the option to play higher notes if you want to.
It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The Sire Larry Carlton L5's frets are Medium Jumbo size. These sit somewhere between a Jumbo and a Medium fret. They're not quite as tall as a full Jumbo, so you'll still feel the fretboard, but you won't feel it as much as with medium frets. This is a good size if you want to make it easy to press the strings but would also like a little bit of ''feedback'' to know when to stop pressing so the notes don't go out of pitch.
Playability Score
Tone
Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.
Wood
Ash Body: The most popular Ash wood for guitars is swamp Ash. It has a really light color with beautiful patterns, which makes it perfect for a natural-looking finish. It's not as lightweight as Alder, but also not as heavy as Mahogany. It's known for producing a bright tone with solid mids and lows.
Maple Neck and Fretboard: This is one of the most popular types of wood used in all kinds of guitars. It's heavy, strong and compact, which makes it great for necks. However, it's also used for fretboards, bodies and tops due to its light color, resistance and beautiful patterns. When it comes to tone, it highlights the mid and high frequencies.
Pickups
This guitar comes with pickups from one of the top brands: Larry Carlton. So you can expect well built pickups with great sound that shouldn't need an upgrade anytime soon.
These are passive pickups, so you can expect a rounder sound and a moderade level of output.
The Sire Larry Carlton L5's configuration is SSS. This is the pickup configuration made famous by the Stratocaster. It gives you beautiful clean tones, but also a vintage-sounding distortion. This pickup combination will sound chimey, but you might be surprised at the warmness that you can get from a single-coil at the neck position on a 22-fret guitar. The disadvantage of this configuration is the hum noise that single-coils produce due to their nature.
Versatility
It gives you a good amount of tone options with its 5-way switch. You can use it to choose at least 5 different pickup combinations.
Unfortunately, it doesn't come with more options for coil split or coil tapping. This makes it less versatile than some competitors.
What music genre is it good for?
As a 6 strings, Solid Body guitar with SSS configuration and Passive pickups, we'd recommend it for genres like Funk or similar. However, you can use almost any guitar for any genre. This is just the typical type of music for this particular one.
Sound Score
Build Quality
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The Sire Larry Carlton L5 is made in Indonesia. Many people prefer the quality of an Indonesian guitar over a Chinese. Respectable brands like Epiphone, Ibanez and Schecter are building in this country because of the great quality and lower price. Some people like to compare them to the ones built in Japan during the 80s, when Japanese guitar makers made a name for themselves.
Bridge
Tune-O-Matic with String Body Thru: The advantage of fixed bridges is that they don't require any kind of set-up. This makes it extremely easy when changing strings because you don't need to adjust anything besides tuning the guitar. Also, the fact that the bridge is directly attached to the body will help to increase sustain. The disadvantage is the lack of versatility since you can't create the same vibrato effects as with tremolo bridges.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your guitar. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the Sire Larry Carlton L5 has a Bone nut. This material is one of the highest quality you can get. It provides excellent sustain and tune stability if cut well. The only disadvantage is that it's an organic material, so it's not consistent. Two different bone nuts, even if made from the same bone, will probably sound slightly different. However, bear in mind that this is only relevant when playing open strings.
Neck Joint
The neck joint is the part where the neck of the guitar meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.
This guitar has a Bolt-On neck joint. Even though this type of neck was looked down upon for a long time, nowadays bolt-on necks are well built and provide just as much sustain as any other join method. First of all, it's cheap to make because it consists of simply 4 bolts that attach the neck to the body. And you can travel with the guitar more easily, swap out the neck if you damage it, or upgrade to a more comfortable neck later on.
