Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass - Overview and Best Prices
- 3 Prices - New from $1,503.06 >
- From Schecter's 2021 Artist series
- Daniel Firth Signature
- Made in South Korea
- 5 strings
- 35"'' scale
- 16" Fretboard Radius
- Quilted Maple top
- Mahogany top
- Mahogany back
- Mahogany sides
- Maple/Walnut Multi-ply w/ Carbon Fiber Reinforcement Rods neck
- Ebony fretboard
- Bridge pickup: Fishman Fluence Bass Soapbar (Humbucker/Passive)
- Neck pickup: Fishman Fluence Bass Soapbar (Humbucker/Passive)
- 1 volume and 4 tone Dome knobs
- 3-way Switch
- Schecter Custom Bass String Thru (or Top Load) bridge
- Bass "C" Neck-Through neck
- 24 XL Jumbo frets
- Grover Bass 144 Series tuners
- Side-By-Side Comparison
Show Specs
| Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass | ||
|---|---|---|
| General | ||
| Brand: | Schecter | |
| Year: | 2021 | |
| Configuration: | HH | |
| Strings: | 5 | |
| Made in: | South Korea | |
| Series: | Artist | |
| Colors: | Green | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Quilted Maple | |
| Type: | Solid Body | |
| Body Material: | Mahogany | |
| Bridge: | Schecter Custom Bass String Thru (or Top Load) | |
| Neck | ||
| Neck Joint: | Neck-Through | |
| Tuners: | Grover Bass 144 Series | |
| Fretboard: | Ebony | |
| Neck Material: | Maple/Walnut Multi-ply w/ Carbon Fiber Reinforcement Rods | |
| Decoration: | Mother of Pearl Blocks | |
| Scale Size: | 35" | |
| Shape: | Bass "C" | |
| Thickness: | 1st Fret: 0.826'' (21mm) - 12th Fret: 0.905'' (23mm) | |
| Frets: | 24 XL Jumbo | |
| Fretboard Radius: | 16" | |
| Nut: | Black Tusq XL | |
| Nut Width: | 45mm (1.771'') | |
| Electronics | ||
| Bridge Pickups: | Fishman Fluence Bass Soapbar (Humbucker / Passive) | |
| Neck Pickup: | Fishman Fluence Bass Soapbar (Humbucker / Passive) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split, Multi-Voicing | |
| Volume Controls: | 1 | |
| Tone Controls: | 4 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Show Diagram
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Neck-Through Build
- Coil Split, Multi-Voicing Pickups
- Active Preamp
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in South Korea
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Price Overview
Its average competitor's price is $1320, which means that the Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass costs around 14% more than the competition. It might be due to it having additional features, but know that you can find cheaper similar alternatives. This takes into account all instruments of the same category in our database with 5 strings and Fixed bridge that are made in South Korea.
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
User Reviews & Feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
VoteHand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass's construction is balanced for most hand sizes.
Nevertheless, this comes down in the end to personal preference. Make sure you test this bass—or another one with similar characteristics—before buying.
Beginner Friendliness
The Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass meets 3 out of our 6 criteria items for beginner friendliness, which means that it's not bad for beginners, but it could be better. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass- Comfortable shape
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
Videos
Playability
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass's 35" scale length compared to other common sizes:
This is considered a long scale bass, and it's the most popular choice for several reasons. Even though it might be more difficult to play than short scale basses due to their increased string tension, their punchier low-end results in a clear and defined bass tone that can cut through in a mix, making them well-suited for genres like rock, metal, and funk.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
The Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass's neck thickness is approximately 0.826'' (21mm) at the first fret, and 0.905'' (23mm) at the twelfth.
These measurements were taken either from the official Schecter website, or, in case this information wasn't provided, by researching multiple online marketplaces and forums where owners of this model have posted their measurements.
It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.
Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass has a 16" fingerboard radius.
Here's an image comparing this fretboard radius to other popular choices:
This fretboard radius is really different than Stratocasters, but it's also a lot flatter than Les Paul fingerboards. It'll heavily favor soloing over playing chords. This doesn't mean you can't use it for chords, but it will be more comfortable to play chords without muting strings in a more curved fretboard. Bending and sliding without losing sustain will also be more likely in a flat fretboard like this one.
Compound radius fingerboards give the best of both worlds. Unfortunately, the Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass has the same radius across the board.
Playability compared to main competitors
Nut Width
The Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass has a nut width of 45mm (1.771''). This is within the most common range of nut widths for a 5-string bass. This is what most players find as a balanced width for both playing chords and single notes across different strings. If you have an "average" hand size, or you're not sure what nut width you'd like, this is a safe bet.
Frets
The Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass has 24 frets. A lot of people mistakenly believe that having more frets will always be better because it gives you a higher octave. This is certainly an advantage, but there's also a disadvantage to this.
Since the fretboard will be longer, the neck pickup will need to be placed closer to the bridge. And as you may know, the further away the neck pickup is from the bridge, the warmer it sounds. This means you'll have a brighter-sounding neck pickup when using a 24-fret bass, even if you use the same pickup on a 22-fret bass.
It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass's frets are XL Jumbo size. These are extra-large frets, which are perfect for people who truly want the least resistance for techniques like vibrato, bending, tapping, and just playing fast in general. You won't be able to feel the fretboard with these frets, so if you press too hard you'll get the notes out of pitch. It might take a while to get used to them because of this.
Playability Score
Tone
Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.
Wood
Mahogany Body: This is the type of wood found in many top-of-the-line guitars, so that's a positive point for the build quality. This red-looking wood Mahogany is found in Africa and Central America and has great sustain and a warm tone due to its high density. The downside about this type of wood is that it's relatively heavy.
Maple Neck: This is one of the most popular types of wood used in all kinds of guitars. It's heavy, strong and compact, which makes it great for necks. However, it's also used for fretboards, bodies and tops due to its light color, resistance and beautiful patterns. When it comes to tone, it highlights the mid and high frequencies.
Ebony Fretboard: This is one of the most expensive woods there is, which is why it's mostly used for fretboards. It is dense, heavy, highly resistant and comes in a really dark color that gives any guitar a classy touch. Tone wise, it helps the high side of the spectrum and provides good sustain.
Pickups
This bass comes with pickups from one of the top brands: Fishman. So you can expect well built pickups with great sound that shouldn't need an upgrade anytime soon.
These are passive pickups, so you can expect a rounder sound and a moderade level of output.
Preamp
The preamp is an electronic circuit that serves as an intermediary between the bass's pickups and the amplifier. Its primary function is to boost and shape the bass's raw signal before it reaches the amplifier. This allows for greater control over the bass's tone, volume, and other sound characteristics. Preamps often include tone controls, equalization settings, and sometimes even onboard effects, enabling bassists to tailor their sound to their preferences and the musical context.
This bass has a Active preamp. Unlike passive basses, which rely solely on passive pickups and tone controls, active preamps require a power source, typically a 9-volt battery, to operate. The active preamp offers several advantages, including the ability to boost or cut specific frequencies, resulting in a more versatile and customizable tonal palette. Active basses are favored in genres where precise tonal sculpting and extended tonal options are essential, such as jazz fusion or progressive rock. However, they do require occasional battery replacement or recharging to ensure optimal performance.
The Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass's configuration is HH. With this pickup combination, you'll get warmer tones and more output than using single coils. Humbucker pickups cancel the noise that single-coil suffer from, which also results in a warmer tone. This pickup combination isn't only for high-gain music like Hard Rock or Heavy Metal. Their warmness is also popular for Jazz, Indie, R&B, Blues and more.
More with the same pickups
Versatility
It comes with the popular 3-way switch that is present in most guitars. For more versatility, players tend to prefer a 5-way switch, although it all depends on what you want to use your bass for.
It has Multiple switch option. The first one is Coil Split. It allows you to 'split' or turn off pickup coils to get even more tones in combination with the pickup selector. When used with humbucker pickups, it'll reduce the output and increase their clarity, turning them essentially into single-coil pickups.
It also has a Multi-Voicing option. This means the pickups can change their output, tone, or sound. Piezo, Fishman and similar are considered multi-voicing pickups.
What music genre is it good for?
As a 5 strings, Solid Body bass with HH configuration and Passive pickups, we'd recommend it for genres like Heavy Metal or similar. However, you can use almost any bass for any genre. This is just the typical type of music for this particular one.
Sound Score
Build Quality
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass is made in South Korea. Guitars made here are well-built and tend to have good quality control, even though they focus on mass production. This used to be the most premium option just below Japan or the US, but other countries like Indonesia are becoming great competitors because of even cheaper labor without sacrificing quality.
Bridge
Schecter Custom Bass String Thru (or Top Load): The advantage of fixed bridges is that they don't require any kind of set-up. This makes it extremely easy when changing strings because you don't need to adjust anything besides tuning the guitar. Also, the fact that the bridge is directly attached to the body will help to increase sustain. The disadvantage is the lack of versatility since you can't create the same vibrato effects as with tremolo bridges.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your bass. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the Schecter Daniel Firth Hellraiser Extreme-5 Signature Bass has a Black Tusq XL nut. It's not made of plastic or low-quality materials. They're made to resemble the sound you get from bone and ivory nuts, but with slippery materials so the intonation and tuning are stable. Also, each nut is carefully cut to ensure you won't have tune stabilization problems.
Neck Joint
The neck joint is the part where the neck of the bass meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.
This bass has a Neck-Through neck joint. Many people believe a neck-through build delivers the best sustain because some of the vibrations from the neck aren't lost like with other neck joints. However, no one has been able to prove this. What we know is that a neck-through build is usually the most comfortable when playing the upper frets because there's nothing on your way at the neck-body joint.
