Schecter C-7 Multiscale Rob Scallon - Overview and Best Prices
- 3 Prices - New from $1,499 >
- From Schecter's 2022 Artist series
- Rob Scallon Signature
- Made in Indonesia
- 7 strings
- 26.25" to 25.5"'' scale
- 16" Fretboard Radius
- Swamp Ash body
- Mahogany 3-pc w/ Carbon Fiber Reinforcement Rods neck
- Ebony fretboard
- Bridge pickup: Schecter Diamond 78 Special Rob Scallon (Humbucker/Passive)
- Neck pickup: Schecter Diamond 78 Rob Scallon (Humbucker/Passive)
- 1 volume and 1 tone Dome knobs
- 3-way Switch
- Hipshot Hardtail (.125) w/ String Thru Body bridge
- Rob Scallon C Neck-Through neck
- 24 Jumbo frets
- Hipshot Grip-Lock tuners
- Weight between 7.2lbs (3.3kgs) and 8.2lbs (3.7kgs)
- Side-By-Side Comparison
Show Specs
| Schecter C-7 Multiscale Rob Scallon | ||
|---|---|---|
| General | ||
| Brand: | Schecter | |
| Year: | 2022 | |
| Configuration: | HH | |
| Strings: | 7 | |
| Made in: | Indonesia | |
| Series: | Artist | |
| Colors: | Black Satin | |
| Left-Handed Version: | Yes | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Swamp Ash | |
| Bridge: | Hipshot Hardtail (.125) w/ String Thru Body | |
| Neck | ||
| Neck Joint: | Neck-Through | |
| Tuners: | Hipshot Grip-Lock | |
| Fretboard: | Ebony | |
| Neck Material: | Mahogany 3-pc w/ Carbon Fiber Reinforcement Rods | |
| Decoration: | Pearloid Reverse Dots | |
| Scale Size: | 26.25" to 25.5" | |
| Shape: | Rob Scallon C | |
| Thickness: | 1st Fret: 0.846'' (21.5mm) - 12th Fret: 0.866'' (22mm) | |
| Frets: | 24 Jumbo | |
| Fretboard Radius: | 16" | |
| Nut: | Black Tusq XL | |
| Nut Width: | 48mm (1.89'') | |
| Electronics | ||
| Bridge Pickups: | Schecter Diamond 78 Special Rob Scallon (Humbucker / Passive) | |
| Neck Pickup: | Schecter Diamond 78 Rob Scallon (Humbucker / Passive) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Black | |
Show Diagram
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
Schecter C-7 Multiscale Rob Scallon
- Locking Tuners
- Expensive Wood
- Black Tusq XL Nut
- Neck-Through Build
- Coil Split Pickups
- Cheap Fret Wire (NS)
- Made in Indonesia
- No Top Brand Pickups
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Price Overview
Its average competitor's price is $1000, which means that the Schecter C-7 Multiscale Rob Scallon costs around 50% more than the competition. It might be due to it having additional features, but know that you can find cheaper similar alternatives. This takes into account all instruments of the same category in our database with 7 strings and Fixed bridge that are made in Indonesia.
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
User Reviews & Feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
VoteOften Compared With
Hand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Schecter C-7 Multiscale Rob Scallon's construction favors people with relatively big hands.
Nevertheless, this comes down in the end to personal preference. Make sure you test this guitar—or another one with similar characteristics—before buying.
Beginner Friendliness
The Schecter C-7 Multiscale Rob Scallon meets 5 out of our 8 criteria items for beginner friendliness, which means that it's a good guitar to start with as a complete beginner. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
Schecter C-7 Multiscale Rob Scallon- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
Videos
How Lightweight is it?
We found that the Schecter C-7 Multiscale Rob Scallon weighs between 7.2lbs (3.3kgs) and 8.2lbs (3.7kgs). This was recorded from some online retailers that publish the weight of the instruments they sell.
Playability
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the Schecter C-7 Multiscale Rob Scallon's 26.25" to 25.5" scale length compared to other common sizes:
The Schecter C-7 Multiscale Rob Scallon features a multi-scale fingerboard, which means that it incorporates two scale lengths at the same time. This is present in some 7+ strings guitars to give a different tension to the lower strings and the higher strings. The thickest strings need more tension to avoid fret buzz (especially when tuned low), so the scale is longer for these strings, while the thinnest strings will need less tension (because they have a lower gauge), so they have a shorter scale to reduce stiffness for bends.
It can feel awkward if you've never played a multi-scale because the frets will have more separation for the higher strings, but a lot of people love their versatility.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
The Schecter C-7 Multiscale Rob Scallon's neck thickness is approximately 0.846'' (21.5mm) at the first fret, and 0.866'' (22mm) at the twelfth.
These measurements were taken either from the official Schecter website, or, in case this information wasn't provided, by researching multiple online marketplaces and forums where owners of this model have posted their measurements.
It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.
Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The Schecter C-7 Multiscale Rob Scallon has a 16" fingerboard radius.
Here's an image comparing this fretboard radius to other popular choices:
This fretboard radius is really different than Stratocasters, but it's also a lot flatter than Les Paul fingerboards. It'll heavily favor soloing over playing chords. This doesn't mean you can't use it for chords, but it will be more comfortable to play chords without muting strings in a more curved fretboard. Bending and sliding without losing sustain will also be more likely in a flat fretboard like this one.
Compound radius fingerboards give the best of both worlds. Unfortunately, the Schecter C-7 Multiscale Rob Scallon has the same radius across the board.
Playability compared to main competitors
Nut Width
The Schecter C-7 Multiscale Rob Scallon has a nut width of 48mm (1.89''). This is considered a wide width for a 7-string guitar. It gives your fingers the extra space you need to play without muting accidentally, but this also makes bar chords harder to perform, especially if you have small hands.
Frets
The Schecter C-7 Multiscale Rob Scallon has 24 frets. A lot of people mistakenly believe that having more frets will always be better because it gives you a higher octave. This is certainly an advantage, but there's also a disadvantage to this.
Since the fretboard will be longer, the neck pickup will need to be placed closer to the bridge. And as you may know, the further away the neck pickup is from the bridge, the warmer it sounds. This means you'll have a brighter-sounding neck pickup when using a 24-fret guitar, even if you use the same pickup on a 22-fret guitar.
It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The Schecter C-7 Multiscale Rob Scallon's frets are Jumbo size. This is a tall fret size that is becoming increasingly popular because it makes it easier to press down the strings cleanly. With this fret size, you won't feel the fretboard when playing, so if you press down too hard, you will get the notes out of pitch. However, this is something you can overcome by getting used to the taller size.
Playability Score
Tone
Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.
Wood
Ash Body: The most popular Ash wood for guitars is swamp Ash. It has a really light color with beautiful patterns, which makes it perfect for a natural-looking finish. It's not as lightweight as Alder, but also not as heavy as Mahogany. It's known for producing a bright tone with solid mids and lows.
Mahogany Neck: This is the type of wood found in many top-of-the-line guitars, so that's a positive point for the build quality. This red-looking wood Mahogany is found in Africa and Central America and has great sustain and a warm tone due to its high density. The downside about this type of wood is that it's relatively heavy.
Ebony Fretboard: This is one of the most expensive woods there is, which is why it's mostly used for fretboards. It is dense, heavy, highly resistant and comes in a really dark color that gives any guitar a classy touch. Tone wise, it helps the high side of the spectrum and provides good sustain.
Pickups
Unfortunately, it doesn't come with pickups from one of the top brands. This doesn't mean you will get bad pickups, but you might want to consider a pickup upgrade after some time.
These are passive pickups, so you can expect a rounder sound and a moderade level of output.
The Schecter C-7 Multiscale Rob Scallon's configuration is HH. With this pickup combination, you'll get warmer tones and more output than using single coils. Humbucker pickups cancel the noise that single-coil suffer from, which also results in a warmer tone. This pickup combination isn't only for high-gain music like Hard Rock or Heavy Metal. Their warmness is also popular for Jazz, Indie, R&B, Blues and more.
More with the same pickups
Versatility
It comes with the popular 3-way switch that is present in most guitars. For more versatility, players tend to prefer a 5-way switch, although it all depends on what you want to use your guitar for.
It has a Coil Split option. It allows you to 'split' or turn off pickup coils to get even more tones in combination with the pickup selector. When used with humbucker pickups, it'll reduce the output and increase their clarity, turning them essentially into single-coil pickups.
What music genre is it good for?
As a 7 strings, Solid Body guitar with HH configuration and Passive pickups, we'd recommend it for genres like Heavy Metal or similar. However, you can use almost any guitar for any genre. This is just the typical type of music for this particular one.
Sound Score
Build Quality
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The Schecter C-7 Multiscale Rob Scallon is made in Indonesia. Many people prefer the quality of an Indonesian guitar over a Chinese. Respectable brands like Epiphone, Ibanez and Schecter are building in this country because of the great quality and lower price. Some people like to compare them to the ones built in Japan during the 80s, when Japanese guitar makers made a name for themselves.
Still, remember that we're taking about Schecter here, which is a brand with good renown. They know how to use cheap labor in this country without sacrificing too much quality. So you shouldn't end up receiving a useless or ugly instrument.
Bridge
Hipshot Hardtail (.125) w/ String Thru Body: The advantage of fixed bridges is that they don't require any kind of set-up. This makes it extremely easy when changing strings because you don't need to adjust anything besides tuning the guitar. Also, the fact that the bridge is directly attached to the body will help to increase sustain. The disadvantage is the lack of versatility since you can't create the same vibrato effects as with tremolo bridges.
Tuners
The Schecter C-7 Multiscale Rob Scallon comes with locking tuners, which helps with tuning stability and makes changing strings a lot faster and easier. As long as they're high quality, these are the best tuning machines you can have. The only disadvantage is that they are a bit heavier than normal tuners.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your guitar. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the Schecter C-7 Multiscale Rob Scallon has a Black Tusq XL nut. It's not made of plastic or low-quality materials. They're made to resemble the sound you get from bone and ivory nuts, but with slippery materials so the intonation and tuning are stable. Also, each nut is carefully cut to ensure you won't have tune stabilization problems.
Neck Joint
The neck joint is the part where the neck of the guitar meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.
This guitar has a Neck-Through neck joint. Many people believe a neck-through build delivers the best sustain because some of the vibrations from the neck aren't lost like with other neck joints. However, no one has been able to prove this. What we know is that a neck-through build is usually the most comfortable when playing the upper frets because there's nothing on your way at the neck-body joint.
