Schecter C-4 Standard - Overview and Best Prices
- 2 Prices - New from $449 >
- From Schecter's 2024 Standard series
- Made in China
- 4 strings
- 34"'' scale
- 16" Fretboard Radius
- Figured Burl top
- Mahogany top
- Mahogany back
- Mahogany sides
- Roasted Maple neck
- Rosewood fretboard
- Bridge pickup: Schecter Diamond Standard Soapbar (Humbucker/Passive)
- Neck pickup: Schecter Diamond Standard Soapbar (Humbucker/Passive)
- 2 volume and 2 tone Dome knobs
- Schecter Diamond Bass bridge
- Bass Thin "C" Bolt-On neck
- 24 Jumbo frets
- Schecter tuners
- Weight between 7.625lbs (3.5kgs) and 8.813lbs (4kgs)
- Side-By-Side Comparison
Show Specs
| Schecter C-4 Standard | ||
|---|---|---|
| General | ||
| Brand: | Schecter | |
| Year: | 2024 | |
| Configuration: | HH | |
| Strings: | 4 | |
| Made in: | China | |
| Series: | Standard | |
| Colors: | Black, Orange | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Figured Burl | |
| Type: | Solid Body | |
| Body Material: | Mahogany | |
| Bridge: | Schecter Diamond Bass | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Schecter | |
| Fretboard: | Rosewood | |
| Neck Material: | Roasted Maple | |
| Decoration: | Dots | |
| Scale Size: | 34" | |
| Shape: | Bass Thin "C" | |
| Thickness: | 1st Fret: 0.787'' (20mm) - 12th Fret: 0.905'' (23mm) | |
| Frets: | 24 Jumbo | |
| Fretboard Radius: | 16" | |
| Nut: | Graphite | |
| Nut Width: | 38mm (1.496'') | |
| Electronics | ||
| Bridge Pickups: | Schecter Diamond Standard Soapbar (Humbucker / Passive) | |
| Neck Pickup: | Schecter Diamond Standard Soapbar (Humbucker / Passive) | |
| Switch: | 0 | |
| Knobs: | Dome | |
| Volume Controls: | 2 | |
| Tone Controls: | 2 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Black | |
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
Schecter C-4 Standard
- Expensive Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No High-Quality Nut
- No Top Brand Pickups
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Active Preamp
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Price Overview
Its average competitor's price is $240, which means that the Schecter C-4 Standard costs around 87% more than the competition. It might be due to it having additional features, but know that you can find cheaper similar alternatives. This takes into account all instruments of the same category in our database with 4 strings and Fixed bridge that are made in China.
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
User Reviews & Feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
VoteOften Compared With
Hand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Schecter C-4 Standard's construction favors people with relatively small hands.
Nevertheless, this comes down in the end to personal preference. Make sure you test this bass—or another one with similar characteristics—before buying.
Beginner Friendliness
The Schecter C-4 Standard meets 3 out of our 6 criteria items for beginner friendliness, which means that it's not bad for beginners, but it could be better. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
Schecter C-4 Standard- Comfortable shape
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
Videos
How Lightweight is it?
We found that the Schecter C-4 Standard weighs between 7.625lbs (3.5kgs) and 8.813lbs (4kgs). This was recorded from some online retailers that publish the weight of the instruments they sell.
Playability
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the Schecter C-4 Standard's 34" scale length compared to other common sizes:
This is considered a long scale bass, and it's the most popular choice for several reasons. Even though it might be more difficult to play than short scale basses due to their increased string tension, their punchier low-end results in a clear and defined bass tone that can cut through in a mix, making them well-suited for genres like rock, metal, and funk.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
The Schecter C-4 Standard's neck thickness is approximately 0.787'' (20mm) at the first fret, and 0.905'' (23mm) at the twelfth.
These measurements were taken either from the official Schecter website, or, in case this information wasn't provided, by researching multiple online marketplaces and forums where owners of this model have posted their measurements.
It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.
Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The Schecter C-4 Standard has a 16" fingerboard radius.
Here's an image comparing this fretboard radius to other popular choices:
This fretboard radius is really different than Stratocasters, but it's also a lot flatter than Les Paul fingerboards. It'll heavily favor soloing over playing chords. This doesn't mean you can't use it for chords, but it will be more comfortable to play chords without muting strings in a more curved fretboard. Bending and sliding without losing sustain will also be more likely in a flat fretboard like this one.
Compound radius fingerboards give the best of both worlds. Unfortunately, the Schecter C-4 Standard has the same radius across the board.
Nut Width
The Schecter C-4 Standard has a nut width of 38mm (1.496''). This is within the most common range of nut widths for a 4-string bass. This is what most players find as a balanced width for both playing chords and single notes across different strings. If you have an "average" hand size, or you're not sure what nut width you'd like, this is a safe bet.
Frets
The Schecter C-4 Standard has 24 frets. A lot of people mistakenly believe that having more frets will always be better because it gives you a higher octave. This is certainly an advantage, but there's also a disadvantage to this.
Since the fretboard will be longer, the neck pickup will need to be placed closer to the bridge. And as you may know, the further away the neck pickup is from the bridge, the warmer it sounds. This means you'll have a brighter-sounding neck pickup when using a 24-fret bass, even if you use the same pickup on a 22-fret bass.
It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The Schecter C-4 Standard's frets are Jumbo size. This is a tall fret size that is becoming increasingly popular because it makes it easier to press down the strings cleanly. With this fret size, you won't feel the fretboard when playing, so if you press down too hard, you will get the notes out of pitch. However, this is something you can overcome by getting used to the taller size.
Playability Score
Tone
Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.
Wood
Mahogany Body: This is the type of wood found in many top-of-the-line guitars, so that's a positive point for the build quality. This red-looking wood Mahogany is found in Africa and Central America and has great sustain and a warm tone due to its high density. The downside about this type of wood is that it's relatively heavy.
Roasted Maple Neck: Similar to simple Maple, but even stronger, darker, and more stable to temperature changes. This is thanks to the treatment process that consists in using high temperatures to drain the water, sugar, and resins from the wood.
Rosewood Fretboard: Since the ban of Brazillian Rosewood, this has become a rare and expensive wood. It's not usually used for guitar bodies because of this, and also because it's heavy. Instead, it's used mainly for fretboards. Sometimes it's also used for necks because it's an extremely hard wood (even harder than maple). Its tonality tends to favor warm tones.
Pickups
Unfortunately, it doesn't come with pickups from one of the top brands. This doesn't mean you will get bad pickups, but you might want to consider a pickup upgrade after some time.
These are passive pickups, so you can expect a rounder sound and a moderade level of output.
Preamp
The preamp is an electronic circuit that serves as an intermediary between the bass's pickups and the amplifier. Its primary function is to boost and shape the bass's raw signal before it reaches the amplifier. This allows for greater control over the bass's tone, volume, and other sound characteristics. Preamps often include tone controls, equalization settings, and sometimes even onboard effects, enabling bassists to tailor their sound to their preferences and the musical context.
This bass has a Passive preamp. A bass with a passive preamp lacks an onboard electronic circuit for tone shaping and signal boosting. Instead, it relies solely on passive pickups and basic tone controls, typically consisting of volume and tone knobs. Passive preamps don't require an external power source like batteries, making them low-maintenance and dependable. While they offer a simpler and more straightforward tonal character, passive basses are appreciated for their warm and vintage sound, often favored in genres like classic rock, blues, and funk. They are an excellent choice for musicians who value the simplicity and timeless appeal of their instrument's tone without the need for active electronic components.
The Schecter C-4 Standard's configuration is HH. With this pickup combination, you'll get warmer tones and more output than using single coils. Humbucker pickups cancel the noise that single-coil suffer from, which also results in a warmer tone. This pickup combination isn't only for high-gain music like Hard Rock or Heavy Metal. Their warmness is also popular for Jazz, Indie, R&B, Blues and more.
More with the same pickups
Versatility
Unfortunately, it doesn't come with more options for coil split or coil tapping. This makes it less versatile than some competitors.
What music genre is it good for?
As a 4 strings, Solid Body bass with HH configuration and Passive pickups, we'd recommend it for genres like Hard Rock or similar. However, you can use almost any bass for any genre. This is just the typical type of music for this particular one.
Sound Score
Build Quality
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The Schecter C-4 Standard is made in China. So you can expect lower build quality when compared to others made in Korea, Japan or the United States. Guitars made in this country are meant for mass production, which translates into less attention to detail and quality control. This doesn't mean the product is made poorly at all. Chinese products have a bad reputation since long ago, but they've definitely improved a lot the last few years.
Still, remember that we're taking about Schecter here, which is a brand with good renown. They know how to use cheap labor in this country without sacrificing too much quality. So you shouldn't end up receiving a useless or ugly instrument.
Bridge
Schecter Diamond Bass: The advantage of fixed bridges is that they don't require any kind of set-up. This makes it extremely easy when changing strings because you don't need to adjust anything besides tuning the guitar. Also, the fact that the bridge is directly attached to the body will help to increase sustain. The disadvantage is the lack of versatility since you can't create the same vibrato effects as with tremolo bridges.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your bass. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the Schecter C-4 Standard has a Graphite nut. This material is self-lubricating, which allows the strings to slide over the nut without too much friction. This helps to keep the guitar in tune when bending and using the tremolo. It's not as resistant and it doesn't sound as good as bone, but it is much better than a plastic nut.
Neck Joint
The neck joint is the part where the neck of the bass meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.
This bass has a Bolt-On neck joint. Even though this type of neck was looked down upon for a long time, nowadays bolt-on necks are well built and provide just as much sustain as any other join method. First of all, it's cheap to make because it consists of simply 4 bolts that attach the neck to the body. And you can travel with the guitar more easily, swap out the neck if you damage it, or upgrade to a more comfortable neck later on.
