Schecter Balsac E-1 FR - Overview and Best Prices

Schecter Balsac E-1 FR Review
Add to Compare
FIND IT ON:
Musician's Friend logoSweetwater logo
  • 3 Prices - New from $1,119.20 >
  • From Schecter's 2020 Artist series
  • Balsac Signature
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 14" Fretboard Radius
  • Mahogany body
  • Maple 3-pc w/ Carbon Fiber Reinforcement Rods neck
  • Ebony fretboard
  • Bridge pickup: Fishman Fluence Modern Ceramic (Humbucker/Active)
  • Neck pickup: Fishman Fluence Modern Alnico (Humbucker/Active)
  • 2 volume and 0 tone Speed knobs
  • 3-way Switch
  • Floyd Rose 1500 Series bridge
  • Ultra Thin C Set neck
  • 24 XL Jumbo Stainless Steel frets
  • Schecter Locking tuners
  • Weight between 8lbs (3.6kgs) and 9lbs (4.1kgs)
  • Side-By-Side Comparison
Show Specs
Schecter Balsac E-1 FR Specifications
Schecter Balsac E-1 FR
General
Brand: Schecter
Year: 2020
Configuration: HH
Strings: 6
Made in: Indonesia
Series: Artist
Colors: Red
Left-Handed Version: No
Body
Type: Solid Body
Body Material: Mahogany
Bridge: Floyd Rose 1500 Series
Neck
Neck Joint: Set
Tuners: Schecter Locking
Fretboard: Ebony
Neck Material: Maple 3-pc w/ Carbon Fiber Reinforcement Rods
Decoration: BälSäc Jaw at 3rd Fret
Scale Size: 25.5"
Shape: Ultra Thin C
Thickness: 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm)
Frets: 24 XL Jumbo Stainless Steel
Fretboard Radius: 14"
Nut: Locking
Nut Width: 41.3mm (1.625'')
Electronics
Bridge Pickups: Fishman Fluence Modern Ceramic (Humbucker / Active)
Neck Pickup: Fishman Fluence Modern Alnico (Humbucker / Active)
Switch: 3
Knobs: Speed
Pickup Mods: Multi-Voicing
Volume Controls: 2
Tone Controls: 0
Hardware
Strap Lock: No
Hardware Color: Black
Show Diagram
Schecter Balsac E-1 FR pickups switch and push knobs diagram
Schecter Balsac E-1 FR's switch options

Our Scores and Tone Evaluation

Playability 77
Sound 84
Build quality 74
Value for money 78
Overall Score 78
Tone Evaluation
  • Heavy Metal
  • Hard Rock
  • Jazz
  • Blues
  • Funk
  • Country
Strengths & Weaknesses
Schecter Balsac E-1 FR
  • Stainless Steel Frets
  • Locking Tuners
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Multi-Voicing Pickups
  • Luminescent Inlay
  • Tremolo
  • Retainer Bar
  • Made in Indonesia
  • No Neck-Through Build
  • No Weight Relief
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Price Overview

Its average competitor's price is $1000, which means that the Schecter Balsac E-1 FR costs around 12% more than the competition. It might be due to it having additional features, but know that you can find cheaper similar alternatives. This takes into account all instruments of the same category in our database with 6 strings and Double Locking bridge that are made in Indonesia.

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

User Reviews & Feedback

Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!

Weight

Vote

Tuning stability

Vote

Neck speed (thickness)

Vote

Neck access to high frets

Vote

Neck profile shape

Vote

Fret edges

Vote

Pickups noise

Vote

Pickups power

Vote
No Reviews Yet

Often Compared With

Explore All From Schecter >

Hand Size Comfortability

After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Schecter Balsac E-1 FR's construction favors people with relatively small hands.

Nevertheless, this comes down in the end to personal preference. Make sure you test this guitar—or another one with similar characteristics—before buying.

Big Hands
Small Hands

Beginner Friendliness

The Schecter Balsac E-1 FR meets 5 out of our 8 criteria items for beginner friendliness, which means that it's a good guitar to start with as a complete beginner. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.

New Player Friendliness

Schecter Balsac E-1 FR
  • Comfortable shape
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Easy-to-use bridge

Videos

Schecter Balsac E1 FR (GWAR GUITAR) @ studiogears.com
Schecter Balsac E1FR sig wankery
Электрогитара Schecter Balsac E-1 FR. Когда Бальзак не писатель
UNBOXING & TESTING MY CUSTOM SCHECTER E-1 DIMEBOLT | done by Chewy who used to make Dimebag's axes
Schecter Sessions: E1 Special Edition

How Lightweight is it?

We found that the Schecter Balsac E-1 FR weighs between 8lbs (3.6kgs) and 9lbs (4.1kgs). This was recorded from some online retailers that publish the weight of the instruments they sell.

Playability

Scale Length

Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.

Here's the Schecter Balsac E-1 FR's 25.5" scale length compared to other common sizes:

Schecter Balsac E-1 FR Scale Length Comparison
Schecter Balsac E-1 FR's scale length (at the top) compared to other popular sizes

This is the same scale length used in Stratocaster guitars, and it's one of the main reasons they have such a bright sound. It's considered a long scale when compared to most non-baritone guitars.

Since the distance between bridge and nut is relatively long, you'll need to give the strings more tension to get them in tune. This higher tension will allow for a couple of things. First, you can get a lower action (get the strings closer to the fretboard) because the strings won't 'wiggle' too much when pluck and won't cause fret buzz. This can allow you to use lower tunings without increasing your string gauge, and it will make it easier to press down the strings fast.

However, the frets will also have a wider separation between each other, which can make it harder to play, especially if you got small hands. The higher tension will also make the strings feel stiffer, so bending will require more strength.

More with the same scale length:

Neck Profile

Schecter Balsac E-1 FR Neck Profile
Schecter Balsac E-1 FR's neck profile

The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.

The Schecter Balsac E-1 FR's neck thickness is approximately 0.748'' (19mm) at the first fret, and 0.787'' (20mm) at the twelfth.

These measurements were taken either from the official Schecter website, or, in case this information wasn't provided, by researching multiple online marketplaces and forums where owners of this model have posted their measurements.

It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.

Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.

More for different hand sizes

Fretboard Radius

When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.

The Schecter Balsac E-1 FR has a 14" fingerboard radius.

Here's an image comparing this fretboard radius to other popular choices:

Schecter Balsac E-1 FR Fretboard Radius Comparison with Fender Stratocaster and Gibson Les Paul
Schecter Balsac E-1 FR's fretboard radius compared to others

This makes it more similar to Gibson guitars (12'') than Fender (9.5''). It's slightly flatter than most modern Gibson fretboards though, which makes it more comfortable for single notes, bendings and vibratos, but less comfortable for chords. If you like the playability of a Gibson, which can be described as ''balanced for chords and solos'', and don't care about having slightly less curve for more comfortable solos, you'll like this radius.

Compound radius fingerboards give the best of both worlds. Unfortunately, the Schecter Balsac E-1 FR has the same radius across the board.

More with the same fretboard radius:

Playability compared to main competitors

25.5'' Scale Length
C Neck Profile
1.625'' Nut Width
14'' Fretboard Radius
27'' Scale Length
D Neck Profile
1.688'' Nut Width
Compound Fretboard Radius
24.75'' Scale Length
C Neck Profile
1.693'' Nut Width
13.78'' Fretboard Radius
25.5'' Scale Length
D Neck Profile
1.688'' Nut Width
Compound Fretboard Radius
25.5'' Scale Length
C Neck Profile
1.693'' Nut Width
12'' Fretboard Radius

Nut Width

Schecter Balsac E-1 FR Nut Width
Schecter Balsac E-1 FR Nut Width

The Schecter Balsac E-1 FR has a nut width of 41.3mm (1.625''). This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Frets

The Schecter Balsac E-1 FR has 24 frets. A lot of people mistakenly believe that having more frets will always be better because it gives you a higher octave. This is certainly an advantage, but there's also a disadvantage to this.

Since the fretboard will be longer, the neck pickup will need to be placed closer to the bridge. And as you may know, the further away the neck pickup is from the bridge, the warmer it sounds. This means you'll have a brighter-sounding neck pickup when using a 24-fret guitar, even if you use the same pickup on a 22-fret guitar.

Finally, these are stainless steel frets. They're the best fretwire available. This means you won't need to change your frets since they should last as long as your guitar. Some people also feel easier bendings after swapping to stainless steel.

More with stainless steel frets:

Fret Size

Schecter Balsac E-1 FR Fret Size Comparison
Schecter Balsac E-1 FR's fret size (in orange) compared to other popular sizes

Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.

The Schecter Balsac E-1 FR's frets are XL Jumbo size. These are extra-large frets, which are perfect for people who truly want the least resistance for techniques like vibrato, bending, tapping, and just playing fast in general. You won't be able to feel the fretboard with these frets, so if you press too hard you'll get the notes out of pitch. It might take a while to get used to them because of this.

More with the same type of frets:

Playability Score

Bending & Vibrato Ease 80
Chord Playability 60
Solo Playability 90
Playability 77

Tone

Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.

Wood

Mahogany wood pattern used for guitar building
Mahogany Body
Maple wood pattern used for guitar building
Maple Neck
Ebony wood pattern used for guitar building
Ebony Fretboard

Mahogany Body: This is the type of wood found in many top-of-the-line guitars, so that's a positive point for the build quality. This red-looking wood Mahogany is found in Africa and Central America and has great sustain and a warm tone due to its high density. The downside about this type of wood is that it's relatively heavy.

Maple Neck: This is one of the most popular types of wood used in all kinds of guitars. It's heavy, strong and compact, which makes it great for necks. However, it's also used for fretboards, bodies and tops due to its light color, resistance and beautiful patterns. When it comes to tone, it highlights the mid and high frequencies.

Ebony Fretboard: This is one of the most expensive woods there is, which is why it's mostly used for fretboards. It is dense, heavy, highly resistant and comes in a really dark color that gives any guitar a classy touch. Tone wise, it helps the high side of the spectrum and provides good sustain.

More made with the same wood:

Pickups

This guitar comes with pickups from one of the top brands: Fishman. So you can expect well built pickups with great sound that shouldn't need an upgrade anytime soon.

These are active pickups, so you can expect a lot of output with a highly compressed signal that will give your tones more distortion while retaining a clear, defined sound, which is what many Heavy Metal players need. However, they have the disadvantage of sometimes lacking a fully clean sound when playing without distortion.

The Schecter Balsac E-1 FR's configuration is HH. With this pickup combination, you'll get warmer tones and more output than using single coils. Humbucker pickups cancel the noise that single-coil suffer from, which also results in a warmer tone. This pickup combination isn't only for high-gain music like Hard Rock or Heavy Metal. Their warmness is also popular for Jazz, Indie, R&B, Blues and more.

More with the same pickups

24 Frets
Floyd Rose Bridge
Fishman Fluence Modern Ceramic Bridge Pickup
Fishman Fluence Modern Alnico Neck Pickup
24 Frets
Floyd Rose Bridge
Fishman Fluence Modern Ceramic Bridge Pickup
Sustainiac Neck Pickup
24 Frets
Floyd Rose Bridge
Fishman Fluence Modern Ceramic Bridge Pickup
Sustainiac Neck Pickup
24 Frets
Fixed Bridge
Fishman Fluence Modern Ceramic Bridge Pickup
Fishman Fluence Modern Alnico Neck Pickup
24 Frets
Fixed Bridge
Fishman Fluence Modern Ceramic Bridge Pickup
Sustainiac Neck Pickup

Versatility

It comes with the popular 3-way switch that is present in most guitars. For more versatility, players tend to prefer a 5-way switch, although it all depends on what you want to use your guitar for.

It has a Multi-Voicing option. This means the pickups can change their output, tone, or sound. Piezo, Fishman and similar are considered multi-voicing pickups.

What music genre is it good for?

As a 6 strings, Solid Body guitar with HH configuration and Active pickups, we'd recommend it for genres like Hard Rock or similar. However, you can use almost any guitar for any genre. This is just the typical type of music for this particular one.

Sound Score

Pickups 85
Sustain 85
Versatility 69
Tuning Stability 95
Sound 84

Build Quality

Country of Origin

Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.

The Schecter Balsac E-1 FR is made in Indonesia. Many people prefer the quality of an Indonesian guitar over a Chinese. Respectable brands like Epiphone, Ibanez and Schecter are building in this country because of the great quality and lower price. Some people like to compare them to the ones built in Japan during the 80s, when Japanese guitar makers made a name for themselves.

Still, remember that we're taking about Schecter here, which is a brand with good renown. They know how to use cheap labor in this country without sacrificing too much quality. So you shouldn't end up receiving a useless or ugly instrument.

Bridge

Floyd Rose 1500 Series: With this type of tremolo bridge, you'll be able to perform dive bombs and pinch harmonics without getting out of tune. This type of bridge gives you the best versatility, but it also makes it harder to set up your guitar correctly, especially when changing your strings.

More with the same type of bridge:

Tuners

The Schecter Balsac E-1 FR comes with locking tuners, which helps with tuning stability and makes changing strings a lot faster and easier. As long as they're high quality, these are the best tuning machines you can have. The only disadvantage is that they are a bit heavier than normal tuners.

Nut Material

Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your guitar. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.

In this case, the Schecter Balsac E-1 FR has a Locking nut. Instead of the typical nut, this nut locks the strings in place and will make them stay in tune even after heavy tremolo use. This type of nut provides the best tune stability, but they also make the guitar more expensive.

It also comes with a retainer bar for the locking nut, which is a helpful addition. Without it, the strings would change pitch once you lock down the nut, so you'd have to make more micro-adjustments at the bridge to tune it correctly.

More with the same nut material:

Neck Joint

The neck joint is the part where the neck of the guitar meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.

This guitar has a Set neck joint. This type of neck joint consists of using different pieces of wood for the neck and the body of the guitar. Both pieces are then glued together. This is more expensive to make than a bolt-on neck, but it's cheaper than a neck-through guitar. Some people believe that this gives more sustain than a bolt-on neck due to both pieces having a 'better connection' than with bolts. Still, it's something difficult to prove.

However, this type of neck joint does have the disadvantage of not allowing you to easily swap the neck for another. This makes this type of neck joint less mod-friendly.

More with the same build:

Build Quality Score

Quality of materials 61
Features 85
Quality Control 75
Build Quality 74