Schecter Avenger FR S Apocalypse - Overview and Best Prices
- 1 Prices - New from $1,449 >
- From Schecter's 2020 Apocalypse series
- Made in South Korea
- 6 strings
- 25.5"'' scale
- 12" to 16" Fretboard Radius
- Swamp Ash body
- Maple/Padauk Multi-ply w/Carbon Fiber Reinforcement Rods neck
- Ebony fretboard
- Bridge pickup: Schecter USA Apocalypse-VI (Humbucker/Passive)
- Neck pickup: Sustainiac (Humbucker/Passive)
- 1 volume and 1 tone Dome knobs
- 3-way Switch
- Floyd Rose 1500 Series bridge
- Thin C Set neck
- 24 XL Jumbo Stainless Steel frets
- Grover Rotomatic 18:1 tuners
- Weight between 7.75lbs (3.5kgs) and 8.6lbs (3.9kgs)
- Side-By-Side Comparison
Show Specs
Schecter Avenger FR S Apocalypse | ||
---|---|---|
General | ||
Brand: | Schecter | |
Year: | 2020 | |
Configuration: | HH | |
Strings: | 6 | |
Made in: | South Korea | |
Series: | Apocalypse | |
Colors: | Blue Patterns, Red Patterns | |
Left-Handed Version: | No | |
Body | ||
Type: | Solid Body | |
Body Material: | Swamp Ash | |
Bridge: | Floyd Rose 1500 Series | |
Neck | ||
Neck Joint: | Set | |
Tuners: | Grover Rotomatic 18:1 | |
Fretboard: | Ebony | |
Neck Material: | Maple/Padauk Multi-ply w/Carbon Fiber Reinforcement Rods | |
Decoration: | Roman Numerals | |
Scale Size: | 25.5" | |
Shape: | Thin C | |
Thickness: | 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm) | |
Frets: | 24 XL Jumbo Stainless Steel | |
Fretboard Radius: | 12" to 16" | |
Nut: | Locking | |
Nut Width: | 41.3mm (1.625'') | |
Electronics | ||
Bridge Pickups: | Schecter USA Apocalypse-VI (Humbucker / Passive) | |
Neck Pickup: | Sustainiac (Humbucker / Passive) | |
Switch: | 3 | |
Knobs: | Dome | |
Pickup Mods: | Sustainer | |
Volume Controls: | 1 | |
Tone Controls: | 1 | |
Hardware | ||
Strap Lock: | No | |
Hardware Color: | Black |
Show Diagram
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
Schecter Avenger FR S Apocalypse
- Stainless Steel Frets
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Sustainer Pickups
- Luminescent Inlay
- Tremolo
- Compound Radius Fretboard
- Retainer Bar
- No Locking Tuners
- Made in South Korea
- No Neck-Through Build
- No Weight Relief
- No 21:1 Tuner Ratio
- No Strap Lock
Price Overview
Its average competitor's price is $1350, which means that the Schecter Avenger FR S Apocalypse costs around 7% more than the competition. It might be due to it having additional features, but know that you can find cheaper similar alternatives. This takes into account all instruments of the same category in our database with 6 strings and Double Locking bridge that are made in South Korea.
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
User Reviews & Feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
VoteOften Compared With
Hand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Schecter Avenger FR S Apocalypse's construction favors people with relatively small hands.
Nevertheless, this comes down in the end to personal preference. Make sure you test this guitar—or another one with similar characteristics—before buying.
Beginner Friendliness
The Schecter Avenger FR S Apocalypse meets 5 out of our 8 criteria items for beginner friendliness, which means that it's a good guitar to start with as a complete beginner. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
Schecter Avenger FR S Apocalypse- Comfortable shape
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
- Locking tuners
- Easy-to-use bridge
Videos
How Lightweight is it?
We found that the Schecter Avenger FR S Apocalypse weighs between 7.75lbs (3.5kgs) and 8.6lbs (3.9kgs). This was recorded from some online retailers that publish the weight of the instruments they sell.
Playability
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the Schecter Avenger FR S Apocalypse's 25.5" scale length compared to other common sizes:
This is the same scale length used in Stratocaster guitars, and it's one of the main reasons they have such a bright sound. It's considered a long scale when compared to most non-baritone guitars.
Since the distance between bridge and nut is relatively long, you'll need to give the strings more tension to get them in tune. This higher tension will allow for a couple of things. First, you can get a lower action (get the strings closer to the fretboard) because the strings won't 'wiggle' too much when pluck and won't cause fret buzz. This can allow you to use lower tunings without increasing your string gauge, and it will make it easier to press down the strings fast.
However, the frets will also have a wider separation between each other, which can make it harder to play, especially if you got small hands. The higher tension will also make the strings feel stiffer, so bending will require more strength.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
The Schecter Avenger FR S Apocalypse's neck thickness is approximately 0.79'' (20.1mm) at the first fret, and 0.87'' (22.1mm) at the twelfth.
These measurements were taken either from the official Schecter website, or, in case this information wasn't provided, by researching multiple online marketplaces and forums where owners of this model have posted their measurements.
It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.
Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The Schecter Avenger FR S Apocalypse has a compound fingerboard radius of 12" to 16".
A compound radius is the best you can get because you'll get the best of both worlds. It starts curved at the nut, but it flattens as you get closer to the body. This means that you'll get great comfortability for chords on the first few frets, but also a flatter fretboard for playing solos without problems on the higher frets.
Playability compared to main competitors
Nut Width
The Schecter Avenger FR S Apocalypse has a nut width of 41.3mm (1.625''). This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.
If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.
Frets
The Schecter Avenger FR S Apocalypse has 24 frets. A lot of people mistakenly believe that having more frets will always be better because it gives you a higher octave. This is certainly an advantage, but there's also a disadvantage to this.
Since the fretboard will be longer, the neck pickup will need to be placed closer to the bridge. And as you may know, the further away the neck pickup is from the bridge, the warmer it sounds. This means you'll have a brighter-sounding neck pickup when using a 24-fret guitar, even if you use the same pickup on a 22-fret guitar.
Finally, these are stainless steel frets. They're the best fretwire available. This means you won't need to change your frets since they should last as long as your guitar. Some people also feel easier bendings after swapping to stainless steel.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The Schecter Avenger FR S Apocalypse's frets are XL Jumbo size. These are extra-large frets, which are perfect for people who truly want the least resistance for techniques like vibrato, bending, tapping, and just playing fast in general. You won't be able to feel the fretboard with these frets, so if you press too hard you'll get the notes out of pitch. It might take a while to get used to them because of this.
Playability Score
Tone
Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.
Wood
Ash Body: The most popular Ash wood for guitars is swamp Ash. It has a really light color with beautiful patterns, which makes it perfect for a natural-looking finish. It's not as lightweight as Alder, but also not as heavy as Mahogany. It's known for producing a bright tone with solid mids and lows.
Maple Neck: This is one of the most popular types of wood used in all kinds of guitars. It's heavy, strong and compact, which makes it great for necks. However, it's also used for fretboards, bodies and tops due to its light color, resistance and beautiful patterns. When it comes to tone, it highlights the mid and high frequencies.
Ebony Fretboard: This is one of the most expensive woods there is, which is why it's mostly used for fretboards. It is dense, heavy, highly resistant and comes in a really dark color that gives any guitar a classy touch. Tone wise, it helps the high side of the spectrum and provides good sustain.
Pickups
This guitar comes with pickups from one of the top brands: Schecter USA. So you can expect well built pickups with great sound that shouldn't need an upgrade anytime soon.
These are passive pickups, so you can expect a rounder sound and a moderade level of output.
The Schecter Avenger FR S Apocalypse's configuration is HH. With this pickup combination, you'll get warmer tones and more output than using single coils. Humbucker pickups cancel the noise that single-coil suffer from, which also results in a warmer tone. This pickup combination isn't only for high-gain music like Hard Rock or Heavy Metal. Their warmness is also popular for Jazz, Indie, R&B, Blues and more.
More with the same pickups
Versatility
It comes with the popular 3-way switch that is present in most guitars. For more versatility, players tend to prefer a 5-way switch, although it all depends on what you want to use your guitar for.
It has a Sustainer option. When activated, the pickups with this feature will give you unlimited sustain. You can create interesting harmonics and make your notes last as long as you want.
What music genre is it good for?
As a 6 strings, Solid Body guitar with HH configuration and Passive pickups, we'd recommend it for genres like Hard Rock or similar. However, you can use almost any guitar for any genre. This is just the typical type of music for this particular one.
Sound Score
Build Quality
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The Schecter Avenger FR S Apocalypse is made in South Korea. Guitars made here are well-built and tend to have good quality control, even though they focus on mass production. This used to be the most premium option just below Japan or the US, but other countries like Indonesia are becoming great competitors because of even cheaper labor without sacrificing quality.
Bridge
Floyd Rose 1500 Series: With this type of tremolo bridge, you'll be able to perform dive bombs and pinch harmonics without getting out of tune. This type of bridge gives you the best versatility, but it also makes it harder to set up your guitar correctly, especially when changing your strings.
Tuners
The tuners have a ratio of 18:1. This means you need 18 turns of the tuner knob to make the tuner post go around 1 complete revolution. The more turns it takes, the finer and more precise your tuning is going to be. An 18:1 ratio is what most instruments have nowadays. Some high-end ones come with a ratio of 21:1.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your guitar. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the Schecter Avenger FR S Apocalypse has a Locking nut. Instead of the typical nut, this nut locks the strings in place and will make them stay in tune even after heavy tremolo use. This type of nut provides the best tune stability, but they also make the guitar more expensive.
It also comes with a retainer bar for the locking nut, which is a helpful addition. Without it, the strings would change pitch once you lock down the nut, so you'd have to make more micro-adjustments at the bridge to tune it correctly.
Neck Joint
The neck joint is the part where the neck of the guitar meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.
This guitar has a Set neck joint. This type of neck joint consists of using different pieces of wood for the neck and the body of the guitar. Both pieces are then glued together. This is more expensive to make than a bolt-on neck, but it's cheaper than a neck-through guitar. Some people believe that this gives more sustain than a bolt-on neck due to both pieces having a 'better connection' than with bolts. Still, it's something difficult to prove.
However, this type of neck joint does have the disadvantage of not allowing you to easily swap the neck for another. This makes this type of neck joint less mod-friendly.