Harley Benton RB-600 - Overview and Best Prices
- 1 Prices - New from €249 >
- From Harley Benton's 2015 Classic series
- Made in China
- 6 strings
- 24.75"'' scale
- 13.78" Fretboard Radius
- Mahogany body
- Maple neck
- Purpleheart fretboard
- Bridge pickup: Artec Classic Mini Humbucker (Humbucker/Passive)
- Neck pickup: Artec Classic Mini Humbucker (Humbucker/Passive)
- 2 volume and 2 tone Bell knobs
- 3-way Switch
- Rik-O-Matic bridge
- Harley Benton C Set neck
- 22 Medium Jumbo frets
- Die-Cast Machine Heads tuners
- Side-By-Side Comparison
Show Specs
Harley Benton RB-600 | ||
---|---|---|
General | ||
Brand: | Harley Benton | |
Year: | 2015 | |
Configuration: | HH | |
Strings: | 6 | |
Made in: | China | |
Series: | Classic | |
Colors: | Black, Red Burst | |
Left-Handed Version: | No | |
Body | ||
Type: | Semi-Hollow | |
Body Material: | Mahogany | |
Bridge: | Rik-O-Matic | |
Neck | ||
Neck Joint: | Set | |
Tuners: | Die-Cast Machine Heads | |
Fretboard: | Purpleheart | |
Neck Material: | Maple | |
Decoration: | Dots | |
Scale Size: | 24.75" | |
Shape: | Harley Benton C | |
Thickness: | 1st Fret: 0.898'' (22.8mm) - 12th Fret: 0.931'' (23.6mm) | |
Frets: | 22 Medium Jumbo | |
Fretboard Radius: | 13.78" | |
Nut: | Plastic | |
Nut Width: | 42mm (1.654'') | |
Electronics | ||
Bridge Pickups: | Artec Classic Mini Humbucker (Humbucker / Passive) | |
Neck Pickup: | Artec Classic Mini Humbucker (Humbucker / Passive) | |
Switch: | 3 | |
Knobs: | Bell | |
Volume Controls: | 2 | |
Tone Controls: | 2 | |
Hardware | ||
Strap Lock: | No | |
Hardware Color: | Chrome |
Show Diagram
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
Harley Benton RB-600
- Expensive Wood
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No High-Quality Nut
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Price Overview
Its average competitor's price is $400, which means that the Harley Benton RB-600 is around 38% cheaper than the competition. This takes into account all instruments of the same category in our database with 6 strings and Fixed bridge that are made in China.
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
User Reviews & Feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
VoteOften Compared With
Explore All From Harley Benton >
Hand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Harley Benton RB-600's construction favors people with relatively small hands.
Nevertheless, this comes down in the end to personal preference. Make sure you test this guitar—or another one with similar characteristics—before buying.
Beginner Friendliness
The Harley Benton RB-600 meets 5 out of our 8 criteria items for beginner friendliness, which means that it's a good guitar to start with as a complete beginner. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
Harley Benton RB-600- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
Videos
Playability
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the Harley Benton RB-600's 24.75" scale length compared to other common sizes:
This is the scale length used in most Gibson guitars. If you like the playability of a Gibson, this guitar will feel pretty similar. It's a lot shorter than the typical Stratocaster (25.5'')
As you can see from the picture above, a shorter scale length also means shorter separation between frets. If you got really small hands, you probably will feel more comfortable playing this guitar than a Fender Stratocaster.
This scale length also allows for easier bends and vibratos because the strings will have lower tension due to the shorter scale.
Finally, another thing affected by scale length is tone. A shorter scale will give less room for the harmonics, thus resulting in a warmer, more 'bassy' tone.
Still, remember that you string gauge plays an important part in all of this. A lighter gauge will make it easier to perform bends, vibratos and will also give you a brighter tone.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
The Harley Benton RB-600's neck thickness is approximately 0.898'' (22.8mm) at the first fret, and 0.931'' (23.6mm) at the twelfth.
These measurements were taken either from the official Harley Benton website, or, in case this information wasn't provided, by researching multiple online marketplaces and forums where owners of this model have posted their measurements.
It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.
Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The Harley Benton RB-600 has a 13.78" fingerboard radius.
Here's an image comparing this fretboard radius to other popular choices:
This makes it more similar to Gibson guitars (12'') than Fender (9.5''). It's slightly flatter than most modern Gibson fretboards though, which makes it more comfortable for single notes, bendings and vibratos, but less comfortable for chords.
Compound radius fingerboards give the best of both worlds. Unfortunately, the Harley Benton RB-600 has the same radius across the board.
Playability compared to main competitors
Nut Width
The Harley Benton RB-600 has a nut width of 42mm (1.654''). This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.
If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.
Frets
The Harley Benton RB-600 has 22 frets. Even though 24 frets has become really popular, there's still a good reason to get fewer frets; the pickup at the neck position will be further away from the bridge. This makes the neck pickup achieve a warmer tone. You might want this if you're playing Jazz or similar genres.
However, if you don't care about the warmer neck pickup, more frets will always be better. It's always nice to have the option to play higher notes if you want to.
It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The Harley Benton RB-600's frets are Medium Jumbo size. These sit somewhere between a Jumbo and a Medium fret. They're not quite as tall as a full Jumbo, so you'll still feel the fretboard, but you won't feel it as much as with medium frets. This is a good size if you want to make it easy to press the strings but would also like a little bit of ''feedback'' to know when to stop pressing so the notes don't go out of pitch.
Playability Score
Tone
Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.
Wood
Mahogany Body: This is the type of wood found in many top-of-the-line guitars, so that's a positive point for the build quality. This red-looking wood Mahogany is found in Africa and Central America and has great sustain and a warm tone due to its high density. The downside about this type of wood is that it's relatively heavy.
Maple Neck: This is one of the most popular types of wood used in all kinds of guitars. It's heavy, strong and compact, which makes it great for necks. However, it's also used for fretboards, bodies and tops due to its light color, resistance and beautiful patterns. When it comes to tone, it highlights the mid and high frequencies.
Purpleheart Fretboard: Also known as Amaranth, it's a hard, dense wood with a brilliant tone. As its name suggests, the purple color makes this wood look exotic.
Pickups
This guitar comes with pickups from one of the top brands: Artec. So you can expect well built pickups with great sound that shouldn't need an upgrade anytime soon.
These are passive pickups, so you can expect a rounder sound and a moderade level of output.
The Harley Benton RB-600's configuration is HH. With this pickup combination, you'll get warmer tones and more output than using single coils. Humbucker pickups cancel the noise that single-coil suffer from, which also results in a warmer tone. This pickup combination isn't only for high-gain music like Hard Rock or Heavy Metal. Their warmness is also popular for Jazz, Indie, R&B, Blues and more.
Versatility
It comes with the popular 3-way switch that is present in most guitars. For more versatility, players tend to prefer a 5-way switch, although it all depends on what you want to use your guitar for.
Unfortunately, it doesn't come with more options for coil split or coil tapping. This makes it less versatile than some competitors.
What music genre is it good for?
As a 6 strings, Semi-Hollow guitar with HH configuration and Passive pickups, we'd recommend it for genres like Jazz or similar. However, you can use almost any guitar for any genre. This is just the typical type of music for this particular one.
Sound Score
Build Quality
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The Harley Benton RB-600 is made in China. So you can expect lower build quality when compared to others made in Korea, Japan or the United States. Guitars made in this country are meant for mass production, which translates into less attention to detail and quality control. This doesn't mean the product is made poorly at all. Chinese products have a bad reputation since long ago, but they've definitely improved a lot the last few years.
Still, remember that we're taking about Harley Benton here, which is a brand with good renown. They know how to use cheap labor in this country without sacrificing too much quality. So you shouldn't end up receiving a useless or ugly instrument.
Bridge
Rik-O-Matic: The advantage of fixed bridges is that they don't require any kind of set-up. This makes it extremely easy when changing strings because you don't need to adjust anything besides tuning the guitar. Also, the fact that the bridge is directly attached to the body will help to increase sustain. The disadvantage is the lack of versatility since you can't create the same vibrato effects as with tremolo bridges.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your guitar. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the Harley Benton RB-600 has a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.
Neck Joint
The neck joint is the part where the neck of the guitar meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.
This guitar has a Set neck joint. This type of neck joint consists of using different pieces of wood for the neck and the body of the guitar. Both pieces are then glued together. This is more expensive to make than a bolt-on neck, but it's cheaper than a neck-through guitar. Some people believe that this gives more sustain than a bolt-on neck due to both pieces having a 'better connection' than with bolts. Still, it's something difficult to prove.
However, this type of neck joint does have the disadvantage of not allowing you to easily swap the neck for another. This makes this type of neck joint less mod-friendly.