Harley Benton GuitarBass - Overview and Best Prices
- 1 Prices - New from €219 >
- From Harley Benton's 2022 Vintage series
- Made in Indonesia
- 6 strings
- 30"'' scale
- 13.78" Fretboard Radius
- Nyatoh body
- Maple neck
- Amaranth fretboard
- Bridge pickup: HBZ Custom Wound AlNiCo5 Vintage Voiced single coil (Single Coil/Passive)
- Middle pickup: HBZ Custom Wound AlNiCo5 Vintage Voiced single coil (Single Coil/Passive)
- Neck pickup: HBZ Custom Wound AlNiCo5 Vintage Voiced single coil (Single Coil/Passive)
- 1 volume and 1 tone Dome knobs
- 5-way Switch
- Tune-O-Matic bridge
- Bass C Bolt-On neck
- 21 Jumbo frets
- Kluson-Style Machine Heads tuners
- Side-By-Side Comparison
Show Specs
| Harley Benton GuitarBass | ||
|---|---|---|
| General | ||
| Brand: | Harley Benton | |
| Year: | 2022 | |
| Configuration: | SSS | |
| Strings: | 6 | |
| Made in: | Indonesia | |
| Series: | Vintage | |
| Colors: | Sunburst | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Nyatoh | |
| Bridge: | Tune-O-Matic | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Kluson-Style Machine Heads | |
| Fretboard: | Amaranth | |
| Neck Material: | Maple | |
| Decoration: | Block pearloid | |
| Scale Size: | 30" | |
| Shape: | Bass C | |
| Frets: | 21 Jumbo | |
| Fretboard Radius: | 13.78" | |
| Nut: | Graphite | |
| Nut Width: | 42mm (1.654'') | |
| Electronics | ||
| Bridge Pickups: | HBZ Custom Wound AlNiCo5 Vintage Voiced single coil (Single Coil / Passive) | |
| Middle Pickup: | HBZ Custom Wound AlNiCo5 Vintage Voiced single coil (Single Coil / Passive) | |
| Neck Pickup: | HBZ Custom Wound AlNiCo5 Vintage Voiced single coil (Single Coil / Passive) | |
| Switch: | 5 | |
| Knobs: | Dome | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Show Diagram
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
Harley Benton GuitarBass
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Expensive Woods
- No High-Quality Nut
- No Top Brand Pickups
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Active Preamp
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Price Overview
Its average competitor's price is $1000, which means that the Harley Benton GuitarBass is around 81% cheaper than the competition. This takes into account all instruments of the same category in our database with 6 strings and Fixed bridge that are made in Indonesia.
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
User Reviews & Feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
VoteOften Compared With
Explore All From Harley Benton >
Hand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Harley Benton GuitarBass's construction favors people with relatively small hands.
Nevertheless, this comes down in the end to personal preference. Make sure you test this bass—or another one with similar characteristics—before buying.
Beginner Friendliness
The Harley Benton GuitarBass meets 4 out of our 6 criteria items for beginner friendliness, which means that it's a good bass to start with as a complete beginner. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
Harley Benton GuitarBass- Tall frets
- Narrow nut
- Short scale
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
Videos
Playability
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the Harley Benton GuitarBass's 30" scale length compared to other common sizes:
This is considered a short scale for a bass. It makes it easier to play for small hands, so if you're just starting or have small hands, it's a good choice to start getting used to the bass.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.
Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The Harley Benton GuitarBass has a 13.78" fingerboard radius.
Here's an image comparing this fretboard radius to other popular choices:
This makes it more similar to Gibson guitars (12'') than Fender (9.5''). It's slightly flatter than most modern Gibson fretboards though, which makes it more comfortable for single notes, bendings and vibratos, but less comfortable for chords.
Compound radius fingerboards give the best of both worlds. Unfortunately, the Harley Benton GuitarBass has the same radius across the board.
Playability compared to main competitors
Nut Width
The Harley Benton GuitarBass has a nut width of 42mm (1.654''). This is considered a narrow width for a 6-string bass. A narrow nut width can make it easier for players with smaller hands or shorter fingers to navigate the fretboard comfortably. However, the limited string spacing may pose challenges for slap bass techniques. Additionally, players with larger hands might find a narrow nut width uncomfortable and potentially lead to more accidental muting of neighboring strings.
Frets
The Harley Benton GuitarBass has 21 frets. Even though 24 frets has become really popular, there's still a good reason to get fewer frets; the pickup at the neck position will be further away from the bridge. This makes the neck pickup achieve a warmer tone. You might want this if you're playing Jazz or similar genres.
However, if you don't care about the warmer neck pickup, more frets will always be better. It's always nice to have the option to play higher notes if you want to.
It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The Harley Benton GuitarBass's frets are Jumbo size. This is a tall fret size that is becoming increasingly popular because it makes it easier to press down the strings cleanly. With this fret size, you won't feel the fretboard when playing, so if you press down too hard, you will get the notes out of pitch. However, this is something you can overcome by getting used to the taller size.
Playability Score
Tone
Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.
Wood
Nyatoh Body: It's a wood type found mainly in Indonesia. It's fairly hard and durable and is becoming popular for building guitars because it isn't expensive.
Maple Neck: This is one of the most popular types of wood used in all kinds of guitars. It's heavy, strong and compact, which makes it great for necks. However, it's also used for fretboards, bodies and tops due to its light color, resistance and beautiful patterns. When it comes to tone, it highlights the mid and high frequencies.
Purpleheart Fretboard: Also known as Amaranth, it's a hard, dense wood with a brilliant tone. As its name suggests, the purple color makes this wood look exotic.
Pickups
Unfortunately, it doesn't come with pickups from one of the top brands. This doesn't mean you will get bad pickups, but you might want to consider a pickup upgrade after some time.
These are passive pickups, so you can expect a rounder sound and a moderade level of output.
Preamp
The preamp is an electronic circuit that serves as an intermediary between the bass's pickups and the amplifier. Its primary function is to boost and shape the bass's raw signal before it reaches the amplifier. This allows for greater control over the bass's tone, volume, and other sound characteristics. Preamps often include tone controls, equalization settings, and sometimes even onboard effects, enabling bassists to tailor their sound to their preferences and the musical context.
This bass has a Passive preamp. A bass with a passive preamp lacks an onboard electronic circuit for tone shaping and signal boosting. Instead, it relies solely on passive pickups and basic tone controls, typically consisting of volume and tone knobs. Passive preamps don't require an external power source like batteries, making them low-maintenance and dependable. While they offer a simpler and more straightforward tonal character, passive basses are appreciated for their warm and vintage sound, often favored in genres like classic rock, blues, and funk. They are an excellent choice for musicians who value the simplicity and timeless appeal of their instrument's tone without the need for active electronic components.
The Harley Benton GuitarBass's configuration is SSS. This is the pickup configuration made famous by the Stratocaster. It gives you beautiful clean tones, but also a vintage-sounding distortion. This pickup combination will sound chimey, but you might be surprised at the warmness that you can get from a single-coil at the neck position on a 22-fret guitar. The disadvantage of this configuration is the hum noise that single-coils produce due to their nature.
Versatility
It gives you a good amount of tone options with its 5-way switch. You can use it to choose at least 5 different pickup combinations.
Unfortunately, it doesn't come with more options for coil split or coil tapping. This makes it less versatile than some competitors.
What music genre is it good for?
As a 6 strings, Solid Body bass with SSS configuration and Passive pickups, we'd recommend it for genres like Funk or similar. However, you can use almost any bass for any genre. This is just the typical type of music for this particular one.
Sound Score
Build Quality
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The Harley Benton GuitarBass is made in Indonesia. Many people prefer the quality of an Indonesian guitar over a Chinese. Respectable brands like Epiphone, Ibanez and Schecter are building in this country because of the great quality and lower price. Some people like to compare them to the ones built in Japan during the 80s, when Japanese guitar makers made a name for themselves.
Still, remember that we're taking about Harley Benton here, which is a brand with good renown. They know how to use cheap labor in this country without sacrificing too much quality. So you shouldn't end up receiving a useless or ugly instrument.
Bridge
Tune-O-Matic: The advantage of fixed bridges is that they don't require any kind of set-up. This makes it extremely easy when changing strings because you don't need to adjust anything besides tuning the guitar. Also, the fact that the bridge is directly attached to the body will help to increase sustain. The disadvantage is the lack of versatility since you can't create the same vibrato effects as with tremolo bridges.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your bass. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the Harley Benton GuitarBass has a Graphite nut. This material is self-lubricating, which allows the strings to slide over the nut without too much friction. This helps to keep the guitar in tune when bending and using the tremolo. It's not as resistant and it doesn't sound as good as bone, but it is much better than a plastic nut.
Neck Joint
The neck joint is the part where the neck of the bass meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.
This bass has a Bolt-On neck joint. Even though this type of neck was looked down upon for a long time, nowadays bolt-on necks are well built and provide just as much sustain as any other join method. First of all, it's cheap to make because it consists of simply 4 bolts that attach the neck to the body. And you can travel with the guitar more easily, swap out the neck if you damage it, or upgrade to a more comfortable neck later on.
