Harley Benton Enhanced MJ-4EB - Overview and Best Prices
- 1 Prices - New from €299 >
- From Harley Benton's 2022 Pro series
- Made in Indonesia
- 4 strings
- 34"'' scale
- 14" Fretboard Radius
- Alder body
- Maple neck
- Ebony fretboard
- Bridge pickup: Roswell MFR4 ferrite (Humbucker/Passive)
- Neck pickup: (/)
- 2 volume and 2 tone Dome knobs
- WSC SK4 bridge
- Bass Modern "C" Bolt-On neck
- 22 Medium Stainless Steel frets
- Machine headsWSC JB45 tuners
- Side-By-Side Comparison
Show Specs
| Harley Benton Enhanced MJ-4EB | ||
|---|---|---|
| General | ||
| Brand: | Harley Benton | |
| Year: | 2022 | |
| Configuration: | HS | |
| Strings: | 4 | |
| Made in: | Indonesia | |
| Series: | Pro | |
| Colors: | Blue | |
| Left-Handed Version: | No | |
| Body | ||
| Type: | Solid Body | |
| Body Material: | Alder | |
| Bridge: | WSC SK4 | |
| Neck | ||
| Neck Joint: | Bolt-On | |
| Tuners: | Machine headsWSC JB45 | |
| Fretboard: | Ebony | |
| Neck Material: | Maple | |
| Decoration: | Pearloid Block | |
| Scale Size: | 34" | |
| Shape: | Bass Modern "C" | |
| Frets: | 22 Medium Stainless Steel | |
| Fretboard Radius: | 14" | |
| Nut: | Black Tusq XL | |
| Nut Width: | 39mm (1.535'') | |
| Electronics | ||
| Bridge Pickups: | Roswell MFR4 ferrite (Humbucker / Passive) | |
| Middle Pickup: | Roswell JM-4A Ferrite (Single Coil / Passive) | |
| Switch: | 0 | |
| Knobs: | Dome | |
| Pickup Mods: | Coil Split | |
| Volume Controls: | 2 | |
| Tone Controls: | 2 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Chrome | |
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
Harley Benton Enhanced MJ-4EB
- Stainless Steel Frets
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Coil Split Pickups
- Active/Passive Preamp
- No Locking Tuners
- Made in Indonesia
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Price Overview
Its average competitor's price is $550, which means that the Harley Benton Enhanced MJ-4EB is around 53% cheaper than the competition. This takes into account all instruments of the same category in our database with 4 strings and Fixed bridge that are made in Indonesia.
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
User Reviews & Feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
VoteExplore All From Harley Benton >
Hand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Harley Benton Enhanced MJ-4EB's construction is balanced for most hand sizes.
Nevertheless, this comes down in the end to personal preference. Make sure you test this bass—or another one with similar characteristics—before buying.
Beginner Friendliness
The Harley Benton Enhanced MJ-4EB meets 3 out of our 6 criteria items for beginner friendliness, which means that it's not bad for beginners, but it could be better. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
Harley Benton Enhanced MJ-4EB- Comfortable shape
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
Videos
Playability
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the Harley Benton Enhanced MJ-4EB's 34" scale length compared to other common sizes:
This is considered a long scale bass, and it's the most popular choice for several reasons. Even though it might be more difficult to play than short scale basses due to their increased string tension, their punchier low-end results in a clear and defined bass tone that can cut through in a mix, making them well-suited for genres like rock, metal, and funk.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.
Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The Harley Benton Enhanced MJ-4EB has a 14" fingerboard radius.
Here's an image comparing this fretboard radius to other popular choices:
This makes it more similar to Gibson guitars (12'') than Fender (9.5''). It's slightly flatter than most modern Gibson fretboards though, which makes it more comfortable for single notes, bendings and vibratos, but less comfortable for chords. If you like the playability of a Gibson, which can be described as ''balanced for chords and solos'', and don't care about having slightly less curve for more comfortable solos, you'll like this radius.
Compound radius fingerboards give the best of both worlds. Unfortunately, the Harley Benton Enhanced MJ-4EB has the same radius across the board.
Playability compared to main competitors
Nut Width
The Harley Benton Enhanced MJ-4EB has a nut width of 39mm (1.535''). This is considered a wide width for a 4-string bass. A wider nut provides more space between the strings, making it easier for players to execute techniques like slap bass and tapping, which require extra room for precision. However, players with smaller hands might find it challenging to comfortably reach across the wider fretboard, as it requires a wider stretch between the fingers.
Frets
The Harley Benton Enhanced MJ-4EB has 22 frets. Even though 24 frets has become really popular, there's still a good reason to get fewer frets; the pickup at the neck position will be further away from the bridge. This makes the neck pickup achieve a warmer tone. You might want this if you're playing Jazz or similar genres.
However, if you don't care about the warmer neck pickup, more frets will always be better. It's always nice to have the option to play higher notes if you want to.
Finally, these are stainless steel frets. They're the best fretwire available. This means you won't need to change your frets since they should last as long as your bass. Some people also feel easier bendings after swapping to stainless steel.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The Harley Benton Enhanced MJ-4EB's frets are Medium size. With medium frets, you can feel the fretboard more than with jumbo frets, but it's still easier to press the strings cleanly than with small frets; notes might change their pitch just slightly if you press hard on the fret. Also, if you need to do some fret leveling after years of playing, you'll have some room to sand them down without having to replace them.
Playability Score
Tone
Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.
Wood
Alder Body: This is a lightweight type of wood that was popularized by Fender. According to them, it's a wood that offers a balanced tone but that favors the upper midrange slightly.
Maple Neck: This is one of the most popular types of wood used in all kinds of guitars. It's heavy, strong and compact, which makes it great for necks. However, it's also used for fretboards, bodies and tops due to its light color, resistance and beautiful patterns. When it comes to tone, it highlights the mid and high frequencies.
Ebony Fretboard: This is one of the most expensive woods there is, which is why it's mostly used for fretboards. It is dense, heavy, highly resistant and comes in a really dark color that gives any guitar a classy touch. Tone wise, it helps the high side of the spectrum and provides good sustain.
Pickups
This bass comes with pickups from one of the top brands: Roswell. So you can expect well built pickups with great sound that shouldn't need an upgrade anytime soon.
These are passive pickups, so you can expect a rounder sound and a moderade level of output.
Preamp
The preamp is an electronic circuit that serves as an intermediary between the bass's pickups and the amplifier. Its primary function is to boost and shape the bass's raw signal before it reaches the amplifier. This allows for greater control over the bass's tone, volume, and other sound characteristics. Preamps often include tone controls, equalization settings, and sometimes even onboard effects, enabling bassists to tailor their sound to their preferences and the musical context.
This bass has a Active/Passive preamp. This means it combines both passive and active electronics in one instrument. This versatile setup allows the player to switch between passive and active modes, providing a wide range of tonal options. In passive mode, the bass relies on traditional passive pickups and tone controls for a warm and organic sound. In active mode, the onboard preamp circuit is engaged, offering enhanced EQ shaping capabilities and sometimes a signal boost. This flexibility caters to a broader spectrum of musical styles and playing preferences, as it allows the bassist to switch between the classic, vintage tone of passive operation and the more versatile and finely tuned active mode, all within the same instrument.
The Harley Benton Enhanced MJ-4EB's configuration is HS. One humbucker at the bridge will give you a lot of output, but you'll also have the bright sound of a Tele or Strat neck pickup for your clean tones.
More with the same pickups
Versatility
It has a Coil Split option. It allows you to 'split' or turn off pickup coils to get even more tones in combination with the pickup selector. When used with humbucker pickups, it'll reduce the output and increase their clarity, turning them essentially into single-coil pickups.
What music genre is it good for?
As a 4 strings, Solid Body bass with HS configuration and Passive pickups, we'd recommend it for genres like Hard Rock or similar. However, you can use almost any bass for any genre. This is just the typical type of music for this particular one.
Sound Score
Build Quality
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The Harley Benton Enhanced MJ-4EB is made in Indonesia. Many people prefer the quality of an Indonesian guitar over a Chinese. Respectable brands like Epiphone, Ibanez and Schecter are building in this country because of the great quality and lower price. Some people like to compare them to the ones built in Japan during the 80s, when Japanese guitar makers made a name for themselves.
Still, remember that we're taking about Harley Benton here, which is a brand with good renown. They know how to use cheap labor in this country without sacrificing too much quality. So you shouldn't end up receiving a useless or ugly instrument.
Bridge
WSC SK4: The advantage of fixed bridges is that they don't require any kind of set-up. This makes it extremely easy when changing strings because you don't need to adjust anything besides tuning the guitar. Also, the fact that the bridge is directly attached to the body will help to increase sustain. The disadvantage is the lack of versatility since you can't create the same vibrato effects as with tremolo bridges.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your bass. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the Harley Benton Enhanced MJ-4EB has a Black Tusq XL nut. It's not made of plastic or low-quality materials. They're made to resemble the sound you get from bone and ivory nuts, but with slippery materials so the intonation and tuning are stable. Also, each nut is carefully cut to ensure you won't have tune stabilization problems.
Neck Joint
The neck joint is the part where the neck of the bass meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.
This bass has a Bolt-On neck joint. Even though this type of neck was looked down upon for a long time, nowadays bolt-on necks are well built and provide just as much sustain as any other join method. First of all, it's cheap to make because it consists of simply 4 bolts that attach the neck to the body. And you can travel with the guitar more easily, swap out the neck if you damage it, or upgrade to a more comfortable neck later on.
