Dean Kerry King V - Overview and Best Prices
- 2 Prices - New from $1,199.20 >
- From Dean's 2020 Artist series
- Kerry King Signature
- Made in Indonesia
- 6 strings
- 24.75"'' scale
- 12" Fretboard Radius
- Maple top
- Eastern Mahogany body
- 3 Piece Maple neck
- Ebony fretboard
- Bridge pickup: EMG 81 (Humbucker/Active)
- Neck pickup: EMG 85 (Humbucker/Active)
- 1 volume and 1 tone Dome knobs
- 3-way Switch
- Kahler Hybrid bridge
- Kerry King Spec. C Shaped Set neck
- 24 Jumbo frets
- Grover tuners
- Side-By-Side Comparison
Show Specs
| Dean Kerry King V | ||
|---|---|---|
| General | ||
| Brand: | Dean | |
| Year: | 2020 | |
| Configuration: | HH | |
| Strings: | 6 | |
| Made in: | Indonesia | |
| Series: | Artist | |
| Colors: | Black Satin | |
| Left-Handed Version: | No | |
| Body | ||
| Top: | Maple | |
| Type: | Solid Body | |
| Body Material: | Eastern Mahogany | |
| Bridge: | Kahler Hybrid | |
| Neck | ||
| Neck Joint: | Set | |
| Tuners: | Grover | |
| Fretboard: | Ebony | |
| Neck Material: | 3 Piece Maple | |
| Decoration: | KK Nails | |
| Scale Size: | 24.75" | |
| Shape: | Kerry King Spec. C Shaped | |
| Frets: | 24 Jumbo | |
| Fretboard Radius: | 12" | |
| Nut: | Locking | |
| Nut Width: | 41mm (1.614'') | |
| Electronics | ||
| Bridge Pickups: | EMG 81 (Humbucker / Active) | |
| Neck Pickup: | EMG 85 (Humbucker / Active) | |
| Switch: | 3 | |
| Knobs: | Dome | |
| Pickup Mods: | Boost | |
| Volume Controls: | 1 | |
| Tone Controls: | 1 | |
| Hardware | ||
| Strap Lock: | No | |
| Hardware Color: | Black | |
Show Diagram
Our Scores and Tone Evaluation
- Heavy Metal
- Hard Rock
- Jazz
- Blues
- Funk
- Country
Dean Kerry King V
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Boost Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Price Overview
Its average competitor's price is $1000, which means that the Dean Kerry King V costs around 20% more than the competition. It might be due to it having additional features, but know that you can find cheaper similar alternatives. This takes into account all instruments of the same category in our database with 6 strings and Double Locking bridge that are made in Indonesia.
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
User Reviews & Feedback
Not all instruments are created equally. That's why it's important to have different opinions. Here's what our users who have played this instrument say. If you've played it before, help others by voting below!
Weight
VoteTuning stability
VoteNeck speed (thickness)
VoteNeck access to high frets
VoteNeck profile shape
VoteFret edges
VotePickups noise
VotePickups power
Vote
Often Compared With
Hand Size Comfortability
After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Dean Kerry King V's construction favors people with relatively small hands.
Nevertheless, this comes down in the end to personal preference. Make sure you test this guitar—or another one with similar characteristics—before buying.
Beginner Friendliness
The Dean Kerry King V meets 3 out of our 8 criteria items for beginner friendliness, which means that it's not recommended for complete beginners. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.
New Player Friendliness
Dean Kerry King V- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Short scale
- Locking tuners
- Easy-to-use bridge
Videos
Playability
Scale Length
Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.
Here's the Dean Kerry King V's 24.75" scale length compared to other common sizes:
This is the scale length used in most Gibson guitars. If you like the playability of a Gibson, this guitar will feel pretty similar. It's a lot shorter than the typical Stratocaster (25.5'')
As you can see from the picture above, a shorter scale length also means shorter separation between frets. If you got really small hands, you probably will feel more comfortable playing this guitar than a Fender Stratocaster.
This scale length also allows for easier bends and vibratos because the strings will have lower tension due to the shorter scale.
Finally, another thing affected by scale length is tone. A shorter scale will give less room for the harmonics, thus resulting in a warmer, more 'bassy' tone.
Still, remember that you string gauge plays an important part in all of this. A lighter gauge will make it easier to perform bends, vibratos and will also give you a brighter tone.
Neck Profile
The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.
It has a C type neck. C-shaped necks like this have been the most popular for the last years. The reason is that they feel good in most hands. It's generally a thin neck that doesn't get in your way when playing fast, but that also has enough mass to give your hands a comfortable grip for chords if they aren't too big.
Thin necks like this make it easier to move your hand across the neck and it helps when playing fast solos, especially if you like to leave your thumb free while playing high on the fretboard. However, thinner necks are also weaker and will need adjustment more often than a thicker neck.
Fretboard Radius
When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.
The Dean Kerry King V has a 12" fingerboard radius.
Here's an image comparing this fretboard radius to other popular choices:
This is the same radius that Gibson uses in most of their guitars. When compare to the other popular radius of Fender Stratocasters, you can see that it's a lot flatter. Guitars with this radius are usually made to bring a good balance between single-note and chord playing.
Compound radius fingerboards give the best of both worlds. Unfortunately, the Dean Kerry King V has the same radius across the board.
Playability compared to main competitors
Nut Width
The Dean Kerry King V has a nut width of 41mm (1.614''). This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.
If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.
Frets
The Dean Kerry King V has 24 frets. A lot of people mistakenly believe that having more frets will always be better because it gives you a higher octave. This is certainly an advantage, but there's also a disadvantage to this.
Since the fretboard will be longer, the neck pickup will need to be placed closer to the bridge. And as you may know, the further away the neck pickup is from the bridge, the warmer it sounds. This means you'll have a brighter-sounding neck pickup when using a 24-fret guitar, even if you use the same pickup on a 22-fret guitar.
It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.
Fret Size
Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.
The Dean Kerry King V's frets are Jumbo size. This is a tall fret size that is becoming increasingly popular because it makes it easier to press down the strings cleanly. With this fret size, you won't feel the fretboard when playing, so if you press down too hard, you will get the notes out of pitch. However, this is something you can overcome by getting used to the taller size.
Playability Score
Tone
Wood will have little influence in the final tone of an electric guitar or bass. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.
Wood
Mahogany Body: This is the type of wood found in many top-of-the-line guitars, so that's a positive point for the build quality. This red-looking wood Mahogany is found in Africa and Central America and has great sustain and a warm tone due to its high density. The downside about this type of wood is that it's relatively heavy.
Maple Neck: This is one of the most popular types of wood used in all kinds of guitars. It's heavy, strong and compact, which makes it great for necks. However, it's also used for fretboards, bodies and tops due to its light color, resistance and beautiful patterns. When it comes to tone, it highlights the mid and high frequencies.
Ebony Fretboard: This is one of the most expensive woods there is, which is why it's mostly used for fretboards. It is dense, heavy, highly resistant and comes in a really dark color that gives any guitar a classy touch. Tone wise, it helps the high side of the spectrum and provides good sustain.
Pickups
This guitar comes with pickups from one of the top brands: EMG. So you can expect well built pickups with great sound that shouldn't need an upgrade anytime soon.
These are active pickups, so you can expect a lot of output with a highly compressed signal that will give your tones more distortion while retaining a clear, defined sound, which is what many Heavy Metal players need. However, they have the disadvantage of sometimes lacking a fully clean sound when playing without distortion.
The Dean Kerry King V's configuration is HH. With this pickup combination, you'll get warmer tones and more output than using single coils. Humbucker pickups cancel the noise that single-coil suffer from, which also results in a warmer tone. This pickup combination isn't only for high-gain music like Hard Rock or Heavy Metal. Their warmness is also popular for Jazz, Indie, R&B, Blues and more.
More with the same pickups
Versatility
It comes with the popular 3-way switch that is present in most guitars. For more versatility, players tend to prefer a 5-way switch, although it all depends on what you want to use your guitar for.
It has a Boost option. It'll increase the output of the pickups when activated. You'll be able to increase the output for heavy genres while still being able to use a cleaner voice when you need it.
What music genre is it good for?
As a 6 strings, Solid Body guitar with HH configuration and Active pickups, we'd recommend it for genres like Heavy Metal or similar. However, you can use almost any guitar for any genre. This is just the typical type of music for this particular one.
Sound Score
Build Quality
Country of Origin
Knowing where the instrument is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive instruments are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.
The Dean Kerry King V is made in Indonesia. Many people prefer the quality of an Indonesian guitar over a Chinese. Respectable brands like Epiphone, Ibanez and Schecter are building in this country because of the great quality and lower price. Some people like to compare them to the ones built in Japan during the 80s, when Japanese guitar makers made a name for themselves.
Bridge
Kahler Hybrid: It's a floating tremolo very similar to Floyd Rose but less popular. The main difference is that you can lock it to the body, which essentially turns it into a fixed bridge. Some heavy metal players prefer this bridge over Floyd Rose because it won't move and get out of pitch when they palm mute.
Nut Material
Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your guitar. A well-cut nut will make sure it stays in tune and will make it more comfortable to play.
In this case, the Dean Kerry King V has a Locking nut. Instead of the typical nut, this nut locks the strings in place and will make them stay in tune even after heavy tremolo use. This type of nut provides the best tune stability, but they also make the guitar more expensive.
Unfortunately, it doesn't come with a retainer bar for the nut, which would be a helpful addition. Without it, the strings will change pitch once you lock down the nut, so you'll have to make more micro-adjustments at the bridge to tune it correctly.
Neck Joint
The neck joint is the part where the neck of the guitar meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.
This guitar has a Set neck joint. This type of neck joint consists of using different pieces of wood for the neck and the body of the guitar. Both pieces are then glued together. This is more expensive to make than a bolt-on neck, but it's cheaper than a neck-through guitar. Some people believe that this gives more sustain than a bolt-on neck due to both pieces having a 'better connection' than with bolts. Still, it's something difficult to prove.
However, this type of neck joint does have the disadvantage of not allowing you to easily swap the neck for another. This makes this type of neck joint less mod-friendly.
